Article
  • Preparation and Weatherability of Unsaturated Polyester/ Silica Composites for Electric Isulation
  • Kang DP, Kim HK, Han DH, Cho WJ, Ha CS
  • 절연용 불포화 폴리에스테르/실리카 복합재료의 제조와 내후성
  • 강동필, 김현교, 한동희, 조원제, 하창식
Abstract
In this study, unsaturated polyester/silica composites for electric insulation have been prepared. Isophthalate-type unsaturated polyester was compounded with SiO2 and the compound was cured by peroxide in the presence of cobalt octoate. The effects of Tinuvin P as a UV screener or TiO2 as a UV absorber on the electrical properties of the composites were investigated. The contents of Tinuvin P and TiO2 were varied from 0-1.0 wt.% and 0-10 wt.% based on the resin, respectively. The composites were cured at room temperature for 24 hrs and then post-cured at 80 ℃ for 24 hrs. The electrical properties and weather resistance of the composites under the accelerated weathering tests were improved by adding either Tinuvin P or TiO2; Optimum properties were given when 0.25-0.5 wt.% of Tinuvin P or 2-5 wt.% of TiO2 was applied. It was concluded that the composites containing either Tinuvin P or TiO2 could be applied as good insulators.

절연용 불포화 폴리에스테르/실리카 복합재료를 제조하고 제조된 복합재료의 내후성과 전기적 성질간의 상관성을 연구하기 위해 Tinuvin P를 자외선 차단제로, TiO2를 자외선 홉수제로 사용하여 그 적용량 (Tinuvin P경우는 수지에 대해 0-1.0 wt%, TiO2의 경우는 수지에 대해 0∼10 wt%)을 변화시키면서 전기적 특성 변화를 조사하였다. 불포화 폴리에스테르 복합재료는 상온에서 24시간 동안 코발트옥테이트 존재하에서 과산화물로 경화시킨 후 80℃에서 24시간 2차 경화시켰다. 강제열화조건하에서 전기적특성과 표면특성 및 몰폴로지를 조사한 결과, 수지에 대해 0.25-0.5%의 Tinuvin P를 사용했을 때와 2-5 wt.%의 TiO2를 사용했을 때 최적조건인 것으로 나타났으며 그 종류에 관계없이 모두 자외선 안정제가 함유된 복합재료의 절연특성과 내후성이 향상되는 것을 관찰할 수 있었고, 적절한 절연물이라 판단되었다.

Keywords: unsaturated polyester/silica composit; electric insulation; weatherability; TiO2; Tinuvin P

  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 1995; 19(3): 274-283

    Published online May 25, 1995

  • 10.7317/pk.
  • Received on Nov 30, -0001
  • Revised on Nov 30, -0001
  • Accepted on Nov 30, -0001

Correspondence to

  • E-mail: