Article
  • Estimation of Critical Surface Tension and Adsorption Characteristics of Aqueous Solution on PMMA Powder by Measuring Contact Angle
  • Rho SB, Ahn WS, Lim MA
  • 접촉각 측정에 의한 분체 PMMA에 대한 수용액의 흡착 특성과 임계표면장력 예측
  • 노승백, 안원술, 임미애
Abstract
Critical surface tension (γc) is one of the important surface characteristics of solid polymers. The contact angle on powder polymehylmethacrylate (PMMA) was measured by wicking method on the base of Washburn equation for several liquids with different surface tensions. The measured values were comparable that of the film type contact angle measurement. The values of γc of powder PMMA estimated by Gibbs adsorption isotherm and Zismann plot were 23.7 mN·m-1 for methanol aqueous solution, 26.3 mN·m-1 for ethanol aqueous solution, and 43.6 mN·m-1for dispersion liquids, respectively, showing different values depending on molecular structures and characteristics of liquids used for contact angle measurement. From the results of γc values, It was considered thats adsorption of organic molecules occurred at the solid polymer surface, leading to decrease in contact angle and γc because of increase of interaction with water. The interaction parameter (ΦG) and work of adhesion (WA) were also determined for powder PMMA.

고분자 고체의 표면 특성을 결정짓는 임계표면장력 (γc)을 고체와 여러 유기액체들과의 접촉각 측정으로부터 예측하였다. 분체 PMMA와 표면장력 값이 다른 유기액체들과의 접촉각을 Washburn식을 기본으로 한 wicking법으로 측정하였으며, 필름형태의 PMMA에 대한 유기액체와의 접촉각과 일치하는 결과를 얻었다. 측정된 접촉각으로부터 분체 PMMA의 γc는 Gibbs 흡착등온식과 Zismann plot으로 예측하였다. γc는 몰분율에 따른 메탄올 수용액, 에탄올 수용액에 대해서는 각각 23.7, 26.3mN·m-1를 얻었으며, 분산액체들에 대해서는 43.6mN·m-1의 결과를 얻었다. 사용된 액체의 분자구조와 성질에 따라 각기 다른 γc값들을 얻었으며, 이로부터 메탄올, 에탄올 분자의 알킬기가 소수성의 PMMA 표면에 흡착 배열하고 친수성기가 고체 표면 바깥쪽으로 배열하게 되어 물과의 상호작용을 일으킴으로써 접촉각과 γc가 감소됨을 유추할 수 있었다. 또한, 분체 PMMA에 대한 메탄올 수용액, 에탄올 수용액 및 분산액체들의 접촉각으로부터 고체의 표면 성질인 상호작용 매개변수(ΦG)와 점착일 (WA)을 결정하였다.

Keywords: contact angle; wicking method; Zismann plot; critical surface tension; adsorption

  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 1997; 21(1): 103-111

    Published online Jan 25, 1997

  • 10.7317/pk.
  • Received on Nov 30, -0001
  • Revised on Nov 30, -0001
  • Accepted on Nov 30, -0001

Correspondence to

  • E-mail: