Article
  • Thermal Properties of High Performance Epoxy/Polysulfone Blends
  • Yoon TS, Lee DS
  • 고성능 에폭시/폴리썰폰 블렌드의 열적 성질
  • 윤태성, 이두성
Abstract
Thermal properties of high performance epoxy/polysulfone (EP/PSF) blends were investigated by DSC, FT-IR, DMA, and TGA. With increasing the PSF content, the rate of cure reaction and the etherification was decreased during cure reaction. When the cure temperature was high, 220 ℃, the thermal degradation of epoxy by the etherification reaction was large, but this degradation was suppressed by adding PSF having high Tg and viscosity. Consequently, the crosslinked epoxy was suppressed the decrease of final Tg. When the cure temperature was low, 180 ℃, the etherification of epoxy was little occurred. Also the decrease of final Tg of EP-rich phase did not shown. It seems that the crosslinked epoxy was obtained to have the homogeneous crosslinking density. The thermal stability of system was increased by increasing the PSF content and by lowering the cure temperature.

고성능 에폭시/폴리썰폰 (EP/PSF) 블렌드의 열적 성질을 DSG, FT-IR, DMA 및 TGA를 사용하여 조사하였다. PSF함량이 증가할수록 경화반응이 느려졌고 경화반응 중의 에테로화반응이 적게 일어났다. 또한, 경화온도가 220℃로 높을 때, 에폭시의 열분해가 많았지만, 높은 Tg 점도를 갖는 PSF의 첨가에 의해 열분해가 억제되었다. 따라서 가교된 에폭시의 최종 Tg 감소를 억제시켰다. 한편, 경화온도가 180℃로 낮았을 때, 에폭시의 에테르화는 거의 일어나지 않았다. 또한, EP-리치 상의 최종 Tg 감소도 보이지 않았다. 이는 균일한 가교밀도를 갖은 가교된 에폭시가 얻어졌기 때문이라 생각된다. 경화온도가 낮아질수록, PSF함량이 증가할수록, 계의 열안정성이 증가하였다.

Keywords: cure reaction; etherification; thermal degradation; thermal stability

  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 1997; 21(2): 215-221

    Published online Mar 25, 1997

  • 10.7317/pk.
  • Received on Nov 30, -0001
  • Revised on Nov 30, -0001
  • Accepted on Nov 30, -0001

Correspondence to

  • E-mail: