Article
  • Polymeric Composites Containing Hollow Latex Particles with Reactive Functional Groups
  • Lee JY, Park JM, An JH
  • 반응성 중공 라텍스 입자를 포함하는 고분자 복합체의 기계적 물성에 관한 연구
  • 이준영, 박종명, 안정호
Abstract
Various types of rubber phase have been used to toughen brittle polymers. Guild and Young claimed that holes may behave like rubber particles, since their finite element analysis revealed no considerable difference between the two in terms of concentrating stress on the surrounding matrix. In this work, the mechanical behavior of polymeric composites containing hollow latex particles has been attempted. Especially the effects of the degree of interfacial bond between hollow particles and matrix phase have been examined by using surface modified hollow particles. The modulus of specimens containing hollow particles maintain the value of the neat epoxy, reflecting the properties of the hard hollow particles with high T(g). Tensile strength shows max, value at the MAA content of 5 wt%. The fracture toughness is increased by employing hollow particles and show its max. Value at the MAA content of 1 wt% which is the least among we have tested.

취약한 고분자의 강인화를 위하여 여러 가지 종류의 고무 입자들을 사용해왔다. Guild와 Young은 유한요소법에 의한 계산을 근거로 응력집중 인자로서의 역할상 고무 입자와 동공(void) 둘 사이에는 별다른 차이가 없음을 시사한 바 있다. 본 실험에서는 중공 라텍스 입자를 포함하는 고분자 복합체를 제조하고 이의 기계적 거동과 강인화도를 조사하였다. 특히 중공 입자의 표면을 개질시켜 중공 입자와 매트릭스 사이에 계면접착력을 조절하여 이에 따른 영향을 분석하였다. 중공 입자를 포함하는 고분자 복합체의 탄성률은 에폭시 자체와 비슷하거나 더 큰 값을 가지며 인장강도와 강인화도는 실험한 영역에서 최대의 계면접착력을 지닌 시료가 아닌 중간 정도의 계면접착력을 가진 시료에서 최대치를 보였다.

Keywords: Hollow particles; Interfacial bond; Toughness; Epoxy; Tensile properties

  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 1998; 22(4): 611-618

    Published online Jul 25, 1998

  • 10.7317/pk.
  • Received on Nov 30, -0001
  • Revised on Nov 30, -0001
  • Accepted on Nov 30, -0001

Correspondence to

  • E-mail: