Article
  • Effect of Mixing Mode on the Fracture Properties of Silica and Carbon Black Filled NR Vlucanizates
  • Park SS, Park BH, Song KC, Kim SK
  • 실리카 및 카본블랙이 충전된 천연고무 가황물에서 배합방법이 파열특성에 미치는 영향
  • 박성수, 박병호, 송기찬, 김수경
Abstract
Silica and carbon black filled natural rubber(NR) vulcanizates were prepared with different mixing modes and amounts of fillers. Curing characteristics, morphology, and tear properties of the NR vulcanizates sere investigated. The NR vulcanizates filled with silica and carbon black sequentially showed longer induction time(t2), cure indes(tgo), and lower curing process. The former showed superior dispersion of fillers and tear properties to the later. The NR vulcanizates containing 30phr of silica showed excellent properties in the experimental range.

충전물의 함량비 및 배합방법을 달리하여 실리카/카본블랙 충전 천연고부 가황물을 제조하였다. 충전물의 함량은 고무에 대해 70phr이 되도록 하였으며, 이들을 동시에 배합하여 제조한 가황물과 실리카를 먼저 배합하고 일정 시간 경과 후 카본블랙을 배합하여 제조한 가황물의 가황특성, 모폴로지, 그리고인열특성 및 크래성장속도 등의 파열특성을 비교하였다. 가공시, 단계배합물은 동시배합물보다 경화 속도(tgo)는 약간 느렸으나, 긴 유도시간(t2), 낮은 최대 토오크 값(tmax)을 보였다. 단계 배합물은 인열특성 및 크랙성장 특성에 있어서도 상대적으로 우수함을 보였으며, 실리카의 함량이 30phr인 경우에 가공성 및 파열 특성이 가장 우수하였다.

Keywords: natural rubber vulcanizates; silica; carbon black; curing characteristics; tear properties

  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2000; 24(2): 220-227

    Published online Mar 25, 2000

  • 10.7317/pk.
  • Received on Nov 30, -0001
  • Revised on Nov 30, -0001
  • Accepted on Nov 30, -0001

Correspondence to

  • E-mail: