Article
  • Effect of the Surface Electrode Formation Method and the Thickness of Membrane on Driving of Ionic Polymer Metal Composites (IPMCs)
  • Cha GC, Song JS, Lee S, Mun MS
  • 표면전극 형성 방법과 이온-교환막 두께가 이온성 고분자-금속 복합체(IPMC) 구동에 미치는 영향
  • 차국찬, 송점식, 이석민, 문무성
Abstract
Ion exchange metal composite(IPMC) has toughness equivalent to the range of human's muscle, transformation-actuation force by relatively low voltage and the fast response time. Thus, as a new method for preparing thicker IPMC, the solution casting method to make the films of various thicknesses out of liquid nafion was attempted in this study. To reduce the surface resistance of electrode, the first plated electrode prepared by Oguro method was replated with Au and Ir using ion beam assisted deposition(IBAD). The microstructures of electrode surfaces before and after IBAD plating were investigated using SEM. The change of water and ion-conductivity in IPMC were measured under applied voltage. The displacement and driving force of IPMCs with various thicknesses were measured to evaluate the driving properties.

이온성 고분자-금속 복합체(ionic polymer metal composite, IPMC)는 낮은 구동 전압에서도 비교적 빠른 응답 속도를 갖는 전기활성고분자(electro active polymer, EAP) 재료이다. IPMC는 인간의 근육과 유사한 인성 및 변형 특성을 나타내므로 최근 인공근육용 구동체 개발을 위한 많은 연구들이 진행되어 왔으며, 또한 우주항공, 센서 및 펌프 등의 다양한 분야에서 적용가능성이 조사되고 있다. 본 연구에서는 액상 내피온을 이용하여 용액 캐스팅 방법으로 다양한 두께의 내피온 막을 제조하는 방법을 도입하였다. IPMC 제조방법은 Oguro가 제안한 방법을 기초로 하여 도금온도를 변화시켜 무전해 도금법을 이용하여 내피온 내부로의 1차 전극을 형성시켰으며, 형성된 1차 전극의 안정성과 표면전기저항을 낮추기 위하여 이온빔보조증착법(ion beam assisted deposition, IBAD)을 도입하여 금과 이리듐을 1차 전극표면 위에 증착하여 2차 전극을 형성시켰다. 1, 2차 무전해 도금한 IPMC와 2차 IBAD 코팅한 IPMC 전극의 표면과 단면 형상을 SEM으로 관찰하였으며, 전압을 인가할 때 IPMC 내부의 수분증발 및 이온전도도의 변화를 조사하였다. 또한 다양한 두께의 IPMC를 제조하여 두께변화에 따른 변위와 구동력을 측정하였다.

Keywords: nafion; IPMC (ion exchange metal composites); artificial muscle; IBAD (ion beam assisted deposition); electro-mechanical

  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2006; 30(6): 471-477

    Published online Nov 25, 2006

  • 10.7317/pk.
  • Received on Mar 15, 2006
  • Revised on Nov 30, -0001
  • Accepted on Oct 25, 2006

Correspondence to

  • E-mail: