Article
  • Coaxial Nozzle Electrospraying of Polymer Solutions: Use of Dispersant Flow
  • Kim MY, Lee J
  • 고분자 용액의 동축 이중노즐 전기분무: 분산제 흐름의 사용
  • 김민영, 이종휘
Abstract
In electrospraying of polymer solutions, metal sample collectors are often ineffective in fully removing solvent from sprayed particles and recovering redispersable sprayed particles. Herein, a novel electrospraying system, where sprayed particles were dispersed into laminar flow of dispersant (coagulation liquid), was designed for the nano-encapsulation of protein drugs. Chitosan and polyacrylic acid were used as the encapsulation materials. Aggregation of particles could be prevented by using this new electrospraying system, and unimodal size distribution was observed at an applied voltage between 4∼16 kV and a low flow rate. The effects of the applied voltage on mean particle size were not significant on the other hand.

고분자 용액의 전기분무에서 금속 샘플 포집기들은 분무된 입자로부터 흔히 용매를 충분히 제거하거나 재분산이 가능한 분무 입자를 회수하는데 효과적이지 못하다. 단백질 약물의 캡슐화(encapsulation)를 위해 본 연구에서는 입자를 분산매(응고액체)의 층류 안으로 분무하는 새로운 전기분무시스템을 설계하였다. 캡슐화용 물질로 키토산과 폴리 아크릴산이 사용되었다. 이 새로운 시스템을 사용하여 입자의 응집을 방지할 수 있었으며, 4∼16 kV의 전압과 낮은 유속에서 unimodal한 입도분포를 관찰할 수 있었다. 반면에 가한 전압이 평균 입자 크기에 미치는 영향은 크지 않았다.

Keywords: electrospraying; chitosan; nanoparticles; drug delivery; protein.

  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2011; 35(3): 254-259

    Published online May 25, 2011

  • 10.7317/pk.
  • Received on Jan 7, 2011
  • Revised on Nov 30, -0001
  • Accepted on Feb 15, 2011

Correspondence to

  • E-mail: