Article
  • Bulk Polymerization of L-lactide Using Aluminium Organometallic Compound Supported on Functionalized Silica
  • Yoo JY, Ko YS
  • 표면 기능화된 실리카에 담지된 Al 유기금속화합물을 이용한 L-lactide 벌크중합 특성 연구
  • 유지연, 고영수
Abstract
In this study aluminum isopropyl oxide (Al(O-i-Pr)3) was supported on the amine-functionalized surface of silica to synthesize high molecular weight (MW) polylactide (PLA), and it was tested for PLA polymerization behaviors. A silica was funtionalized with silane compound having amine groups, then in-situ treated with Al(O-i-Pr)3. Al(O-i-Pr)3 attached to amine group on silica showed activity only in the presence of MAO (methyl aluminoxane). At the polymerization temperature of 115 ℃, the conversion and the MW of PLA were increased as the amount of silane was increased. At the polymerization temperature of 130 ℃, the conversion was decreased while the MW was increased drastically and reached to MW 44000 g/mol when the amine concentration was 3.0 mmol/g. A bimodal type GPC curve was shown at the polymerization temperature of 115 ℃. As the amount of amine group increased, the peaks of GPC curve were merged. At the polymerization of 130 ℃, a unimodal GPC curve was shown. Al(O-i-Pr)3 supported on amine-functionalized silica was able to produce higher MW PLA with enhanced activity compared to homogeneous Al(O-i-Pr)3.

본 연구에서는 높은 분자량의 polylactide(PLA)를 중합하기 위하여 aluminum isopropyl oxide(Al(O-i-Pr)3)를 아민기로 표면 기능화된 실리카에 담지하고 이를 촉매로 이용하여 생성된 PLA의 중합특성을 확인하였다. 담지촉매는 먼저 실리카 표면을 아민기를 갖는 실란화합물로 기능화한 후 Al(O-i-Pr)3을 in-situ 합성하였다. 기능기에 담지된 Al(O-i-Pr)3는 MAO(methyl aluminoxane) 존재하에 중합활성을 보였다. 115 ℃에서는 표면 기능화된 아민기양이 증가할수록 전환율과 분자량이 증가하였고, 130 ℃에서는 표면 기능화된 아민기양이 증가할수록 전환율은 감소하였으나 분자량은 크게 증가하여 표면 기능화된 아민기양이 3.0 mmol일 경우 44000 g/mol로 가장 높은 분자량을 얻었다. GPC curve를 통해 115 ℃ 중합온도에서는 분자량 분포곡선이 bimodal 형태에서 저분자량 부분이 크게 증가하여 shoulder 형태로 변화하였으며 130 ℃에서는 GPC 단일피크를 보였다. 균일계 Al(O-i-Pr)3 촉매보다 아민기로 표면 기능화된 실리카에 담지된 Al(O-i-Pr)3 촉매가 더 높은 활성과 고분자량의 PLA를 합성할 수 있었다.

Keywords: PLA; surface functionalization; silane; amine; aluminium complex.

  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2012; 36(6): 693-698

    Published online Nov 25, 2012

  • 10.7317/pk.
  • Received on Mar 8, 2012
  • Revised on Nov 30, -0001
  • Accepted on Jun 11, 2012

Correspondence to

  • E-mail: