Article
  • Anisotropy of the Mechanical Loss Tangent of Uniaxially Drawn PET Films
  • Park JS, Jo WH, Kim SY
  • 일축연신한 PET필름의 손실 tangent의 이방성
  • 박종신, 조원호, 김상용
Abstract
The anisotropy of the loss tangent of uniaxially stretched PET films was investigated. The intensity of maximum tan δ(parallel to the drawing direction) was higher than that the maximum tan δ(perpendicular to the drawing direction) and the maximum tan δ temperature was lower in the parallel direction than in the perpendicular one. Maximum tan δ increased with the draw ratio of up to 2.5 above which it decreased rapidly while maximum tan δ decreased monotonously with the draw ratio. On the other hand, both of them decreased with increasing annealing temperature. The ratio of maximum tan δ to maximum tan δ increased with the draw ratio and decreased with increasing annealing temperature, indicating that the anisotropic behavior increased with the draw ratio but decreased with increasing annealing temperature.

일축 연신한 PET필름의 손실 tangent의 이방성을 연신비와 열처리온도의 변화에 대한 의존성을 조사 검토하였다. 연신축과 평행한 방향의 최대 tanδ의 강도는 연신축과 수직한 방향의 그것보다 높았으며, 한편 최대 tanδ를 나타내는 온도는 연신축과 평행방향이 수직방향보다 낮았다. 최대 tanδ는 연신비가 2.5일때까지 증가하다가 그 이상일 때는 급격하게 감소한 반면 최대 tanδ는 연신비가 증가할수록 단조 감소하였다. tanδ와 tanδ공히 열처리 온도가 증가할수록 감소하였다. 최대 tanδ와 최대 tanδ의 비는 연신비에 따라 증가하였으나 열처리 온도에 따라서는 감소하였다. 즉 이방성은 연신비에 따라 비례적으로 증가한 반면 열처리 온도에 따라서는 감소하였다.

Keywords:

  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 1981; 5(4): 284-293

    Published online Aug 25, 1981

  • 10.7317/pk.
  • Received on Nov 30, -0001
  • Revised on Nov 30, -0001
  • Accepted on Nov 30, -0001

Correspondence to

  • E-mail: