Article
  • Curing Kinetics of Polyurethane Elastomers Depending on the Amount of Curing Agent and Temperatures by Real Time FTIR Spectroscopy
  • Kim SM, Kim SH, Lee EJ, Park HJ, Lee KY
  • 실시간 FTIR 분광법을 이용한 경화제 함량 및 경화 온도에 따른 폴리우레탄 탄성체 경화반응속도
  • 김세미, 김선홍, 이은주, 박희정, 이기윤
Abstract
The effects of stoichiometric ratios of curing agent to prepolymer and temperature on the curing reaction rates of polyurethane elastomer were investigated. The prepolymers were made from toluene diisocyanate (TDI) and polytetramethylene ether glycol (PTMEG) at 80 °C in nitrogen atmosphere for an hour. Then the prepolymers were mixed with the curing agent, 4,4'-methylene bis(2-chloroaniline) (MOCA) to produce polyurethane elastomer. The curing reactivities of polyurethane prepolymer with curing agent were measured by real time FTIR spectroscopy. The stoichiometric ratios were controlled from 0.85 to 1.05 at fixed curing temperatures from 80 to 120°C. Conversions and reaction rates were increased, as the stoichiometric ratios increased. And they were increased, as the reaction temperatures increased. Kamal's equation was adopted for simulation as a kinetic model.

본 연구에서는 경화제의 함량과 경화 온도가 폴리우레탄 탄성체의 경화반응속도에 끼치는 영향에 대해 연구 하였다. 톨루엔 디이소시아네이트와 폴리테트라메틸렌 에테르 글리콜을 질소 분위기 하에 80 °C 에서 한 시간 동안 반응시켜 폴리우레탄 프리폴리머를 합성하였으며 폴리우레탄 탄성체를 만들기 위해 4,4'-메틸렌 비스(2-클로로아닐린)을 경화제로 적용하였다. 아민-이소시아네이트 비율은 0.85에서 1.05까지, 경화온도는 각각 80 °C에서 120 °C까지 진행하여 폴리우레탄 탄성체의 경화반응성은 실시간 FTIR을 통해 확인하였다. 아민-이소시아네이트 비율과 경화온도를 높일수록 전환율과 반응속도가 증가함을 알 수 있었으며 수치 해석을 위해 Kamal 식을 적용하였다.

Keywords: polyurethane; real time FTIR; curing

  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2017; 41(4): 610-618

    Published online Jul 25, 2017

  • 10.7317/pk.2017.41.4.610
  • Received on Dec 19, 2016
  • Revised on Nov 30, -0001
  • Accepted on Feb 6, 2017

Correspondence to

  • E-mail: