Article
  • Non-isothermal Crystallization Behavior, Rheological and Thermal Conductive Properties of Recycled Polyethylene Terephthalate/Polyethylene Blends
  • Bin Yang , Dan Wang, Qin-Ting Chen, Jin Chen, Kang Chen, Ji-Bin Miao, Jia-Sheng Qian, Ru Xia, and You Shi*

  • College of Chemistry & Chemical Engineering, Institute of High Performance Rubber Materials & Products, and Key Laboratory of Environment-Friendly Polymeric Materials of Anhui Province, Anhui University, Hefei 230601, China
    *College of Polymer Science & Engineering, State Key Laboratory of Polymer Materials Engineering, Sichuan University, Chengdu 610065, Sichuan, China

  • 재활용 폴리에틸렌테레프탈레이트/폴리에틸렌 블렌드의 비등온 결정화 거동과 유변학 및 열전도 특성
Abstract

In this study, we prepared series of recycled polyethylene terephthalate (RPET)/polyethylene (PE) blends using melt extrusion. The effect of RPET content on crystallization behavior and thermal conductive properties of the resultant blends were investigated using differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA), etc. RPET was found to exert nucleating effect on the melt crystallization of PE. The Agari model presented fairly reasonable prediction of thermal conductivity as a function of RPET loading. The melt cooling process was predicted with an enthalpy transformation method (ETM), which is a well-established mean of evaluating the instantaneous heat conduction of crystalline polymers/composites, and the obtained curves were consistent with our experimental results. Besides, a four-parameter model (FPM) was adopted coupled with an in-situ temperature measurement in order to further disclose the solidification and crystallization kinetics of PE in the presence of RPET in the blends.


Keywords: melt blending, thermal properties, cooling behavior, recycled polyethylene terephthalate, polyethylene

  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2020; 44(3): 270-280

    Published online May 25, 2020

  • 10.7317/pk.2020.44.3.270
  • Received on Dec 9, 2019
  • Revised on Mar 4, 2020
  • Accepted on Mar 16, 2020

Correspondence to

  • Bin Yang
  • College of Chemistry & Chemical Engineering, Institute of High Performance Rubber Materials & Products, and Key Laboratory of Environment-Friendly Polymeric Materials of Anhui Province, Anhui University, Hefei 230601, China

  • E-mail: yanbin@ahu.edu.cn