Article
  • Study on Physical Properties of Polyphenylene Sulfide Composites with Variothermal Mold Temperatures
  • Chanhyuk Um, Dohyun Jung*, Seung Yong Yu**, Sang Sun Lee***, Hyun Wook Lee, Pyoung-Chan Lee, Youn Ki Ko, Sun Kyoung Jeoung, and Jin Uk Ha

  • Material Technology R&D Division, KATECH, 303 Pungse-ro, Cheonan, Chungnam 31214, Korea
    *R&D Center KOPLA CO., Ltd, 142 Sangduwon-gil, Hwasung, Gyeonggi 18586, Korea
    **R&D Team INZI Controls CO., Ltd., 171 Gunjacheon-ro, Shiheung, Gyeonggi 15090, Korea
    ***LK GLSP, 62 Jeonggicha 1-ro, Younggang, Jeonnam 57055, Korea

  • 금형온도 조건에 따른 PPS 복합수지의 물리적 특성 변화 연구
  • 엄찬혁 · 정도현* · 유승용** · 이상선*** · 이현욱 · 이평찬 · 고윤기 · 정선경 · 하진욱† 

  • 한국자동차연구원 소재기술연구본부, *코프라, **인지컨트롤스, ***엘케이지엘에스피

Abstract

Polyphenylene sulfide (PPS) is well known semi-crystalline super engineering plastic which is having a very high melting temperature (above 290 oC) and strong chemical resistance. Research on replacing metallic materials with PPS is going on due to its superior properties. However, PPS is the material that does not have much attention in Korea as compared to the other developed countries. In this research, the crystallinity of the resin was influenced by the mold temperature, as a result, physical properties such as tensile strength, thermal properties were changed. Analyses were carried out with specimen and automotive molded part.


폴리페닐렌 설파이드(PPS) 수지는 용융온도가 290 oC 이상이며, 내화학특성이 매우 우수한 결정성 슈퍼 엔지니어링 플라스틱이다. 소재가 지닌 우수한 특성으로 금속소재를 대체할 수 있는 화학 소재로 주목받으면서 선진국에서는 관련된 많은 연구가 진행되고 있지만, 국내에서는 소재가 지닌 우수한 특성에도 불구하고 아직 다양한 연구가 진행되지 못하고 있다. 본 연구에서는 PPS 수지의 금형 온도조건 변화에 따라 달라지는 PPS의 결정화도를 분석하였으며, 결정화도에 따른 수지의 물성변화 경향을 분석하였다. PPS 소재를 적용한 부품의 금형온도에 따른 물성변화 값을 측정하여 시편 사출물과 강성 특성을 비교 분석하였다.


Keywords: polyphenylene sulfide, mold temperature, crystallinity, cooling control, super engineering plastics

  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2020; 44(6): 798-803

    Published online Nov 25, 2020

  • 10.7317/pk.2020.44.6.798
  • Received on May 25, 2020
  • Revised on Jul 15, 2020
  • Accepted on Jul 24, 2020

Correspondence to

  • Jin Uk Ha
  • Material Technology R&D Division, KATECH, 303 Pungse-ro, Cheonan, Chungnam 31214, Korea

  • E-mail: juha@katech.re.kr