Article
  • Effect of Laser Scanning Speed on the Formation of Sintered Layer in SLS 3-D Printing
  • Jeongbin Park, Donghyun Lee, and Ho-Jong Kang

  • Department of Polymer Science and Engineering, Dankook University, Gyeonggi-do 16890, Korea

  • 레이저 스캐닝 속도가 SLS 3-D 프린팅 융착 형성 층에 미치는 영향
  • 박정빈 · 이동현 · 강호종

  • 단국대학교 고분공학과

References
  • 1. C. Deckard, U.S.Patent 4,863,538 (1989).
  •  
  • 2. J. P. Kruth, P. Mercelis, J. Van Vaerenbergh, L. Froyen, and M. Rombouts, Rapid Prototyp. J., 11, 26 (2005).
  •  
  • 3. J. P. Kruth, X. Wang, T. Laoui, and L. Froyen, Assembly Autom., 23, 357 (2003).
  •  
  • 4. A. J. Pinkerton, Opt. Laser Technol., 78, 25 (2016).
  •  
  • 5. K. P. McAlea, P. F. Forderhase, M. E. Ganninger, F. W. Kunig, and J. Angelo, U.S.Patent 5,733,497 (1998).
  •  
  • 6. G. F. Marshall, Handbook of Optical and Laser Scanning, Marcel Dekker, New York, 2004.
  •  
  • 7. L. Beiser and B. Johnson, Handbook of Optics, McGraw-Hill, New York, 1995.
  •  
  • 8. S. Eshraghi and S. Das, Acta Biomater., 6, 2468 (2010).
  •  
  • 9. M. Vaezi, H. Seitz, and S. Yang, Int. J. Adv. Manuf. Technol., 67, 1721 (2013).
  •  
  • 10. K. C. Kolan, M. C. Leu, G. E. Hilmas, and M.Velez, J. Mech. Behav. Biomed. Mater., 13, 14 (2012).
  •  
  • 11. F. L. Amorim, A. Lohrengel, V. Neubert, C. F.Higa, and T. Czelusniak, Rapid Prototyp. J., 20, 98 (2014).
  •  
  • 12. D. Gu and Y. Shen, Mater. Sci. Eng.: A, 489, 69 (2008).
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2018; 42(5): 747-751

    Published online Sep 25, 2018

  • 10.7317/pk.2018.42.5.747
  • Received on Jan 29, 2018
  • Revised on Mar 12, 2018
  • Accepted on Mar 19, 2018

Correspondence to

  • Ho-Jong Kang
  • Department of Polymer Science and Engineering, Dankook University, Gyeonggi-do 16890, Korea

  • E-mail: hjkang@dankook.ac.kr