Article
  • Hyperelastic Material Modeling of Natural Rubber Compounds and Finite Element Analysis of Bushing Performance in Automobile

  • Jung Keun Cho*, Ra Sung Kim*, In-Kyung Park*,† , Ye Chan Kim**, Min Ju Hwang**, Jonghwan Suhr*,**, Heon Seob Jung***, Jae Wook Kang***, and Jae-Do Nam*,**,†

  • *School of Chemical Engineering, Department of Polymer Science and Engineering, Sungkyunkwan University, Suwon 16419, Korea
    **Department of Mechanical Engineering, Sungkyunkwan University, Suwon 16419, Korea
    ***Elastomer & Tribology Materials Development Team, Hyundai Motor Company, Hwa-Sung 18280, Korea

  • 천연고무 컴파운딩의 초탄성 재료 모델링 및 차량용 부싱 성능의 유한요소해석 연구

  • 조중근* · 김라성* · 박인경*,† · 김예찬** · 황민주** · 서종환*,** · 정헌섭*** · 강재욱*** · 남재도*,**,†

  • *성균관대학교 화학공학/고분자공학부 고분자공학과, **성균관대학교 에너지과학과, ***현대자동차 고무마찰재료개발팀

References
  • 1. D. W. Kang and Y. N. Yin, Appl. Chem. Eng., 21, 46 (2000).
  •  
  • 2. H. Douville, P. Masson, and A. Berry, Appl. Acoust., 67, 358 (2006).
  •  
  • 3. R. Martin and L. Alexander, Int. J. Solids Struct., 47, 2918 (2010).
  •  
  • 4. R. W. Ogden, Non-Linear Elastic Deformations, Ellis Horwood Limited, UK, 1984.
  •  
  • 5. J. Sohn, K. Kim, and W. Yoo, Trans. KSAE, 7, 186 (1999).
  •  
  • 6. J. J. Kim and H. Y. Kim, Comput. Struct., 65, 725 (1997).
  •  
  • 7. R. W. Ogden, Non-Linear Elastic Deformations, Courier Corporation, Massachusetts, 1997.
  •  
  • 8. A. Ali, M. Hosseini, and B. Sahari, Am. J. Eng. Appl. Sci., 3, 232 (2010).
  •  
  • 9. B. Duncan, Test Methods for Determining Hyperelastic Properties of Flexible Adhesive, Centre for Materials Measurement and Technology, UK, 1999.
  •  
  • 10. H. Bechir, Eur. J. Mech. A Solids, 25, 110 (2006).
  •  
  • 11. M. Mooney, J. Appl. Phys., 11, 582 (1940).
  •  
  • 12. R. S. Rivlin, Phil. Trans. R. Soc. Lond. A, 241, 379 (1948).
  •  
  • 13. R. W. Ogden, Phil. Trans. R. Soc. Lond. A, 326, 565 (1972).
  •  
  • 14. R. Campion and A. Gent, Engineering with Rubber, Oxford University Press, UK, 1992.
  •  
  • 15. E. M. Arruda and M. C. Boyce, J. Mech. Phys. Solids, 41, 389 (1993).
  •  
  • 16. M. Sasso, G. Palmieri, and G. Chiappini, Polym. Test., 27, 995 (2008).
  •  
  • 17. W. D. Kim, W. S. Kim, and D. J. Kim, Trans. KSAE, 28, 848 (2004).
  •  
  • 18. J. Gough, J. Rubber Research, 10, 131 (2007).
  •  
  • 19. J. Adkins, Br. J. Appl. Phys., 5, 354 (1954).
  •  
  • 20. K. N. Morman Jr. and T. Y. Pan, Rubber Chem. Technol., 61, 503 (1988).
  •  
  • 21. L. Treloar, Trans. Faraday Soc., 39, 36 (1943).
  •  
  • 22. B. Kim and S. B. Lee, Int. J. Precis. Eng. Manuf., 13, 759 (2012).
  •  
  • 23. R. Tobajas and E. Ibartz, Proc. Int. Electron. Conf. Mater., 2, 1 (2016).
  •  
  • 24. R. Rivlin, Phil. Trans. R. Soc. Lond. A, 241, 379 (1948).
  •  
  • 25. M. Shahzad and A. Kamran, Mater. Res., 18, 918 (2015).
  •  
  • 26. R. W. Ogden, Proc. R. Soc. Lond. A, 326, 565 (1972).
  •  
  • 27. L. Treloar, The Physics of Rubber Elasticity, Oxford University Press, UK, 1958.
  •  
  • 28. O. Yeoh, Rubber Chem. Technol., 63, 792 (1990).
  •  
  • 29. S. Cantournet, R. Desmorat, and J. Besson, Int. J. Solids Struct., 46, 2255 (2009).
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2018; 42(6): 946-953

    Published online Nov 25, 2018

  • 10.7317/pk.2018.42.6.946
  • Received on Apr 10, 2018
  • Revised on Jun 12, 2018
  • Accepted on Jun 19, 2018

Correspondence to

  • In-Kyung Park*, and Jae-Do Nam*,**

  • *School of Chemical Engineering, Department of Polymer Science and Engineering, Sungkyunkwan University, Suwon 16419, Korea
    **Department of Mechanical Engineering, Sungkyunkwan University, Suwon 16419, Korea

  • E-mail: innh@skku.edu, jdnam@skku.edu