Article
  • Optimization Condition for Injection Molding of TV Speaker Grille Using CAE
  • Kim B, Jang W, Kim J, Chung CW, Park YH, Choe S
  • CAE를 이용한 TV Speaker Grille 사출 성형의 최적화
  • 김범호, 장우진, 김정훈, 정지원, 박영훈, 최순자
References
  • 1. Spencer RS, Gilmore GD, J. Colloid Sci., 6, 118 (1950)
  •  
  • 2. Spencer RS, Gilmore GD, J. Appl. Phys., 21, 523 (1950)
  •  
  • 3. Ballman RL, Shusman T, Toor HL, Ind. Eng. Chem., 51, 847 (1959)
  •  
  • 4. Lord HA, Williams G, Polym. Eng. Sci., 15, 569 (1975)
  •  
  • 5. Tadmor Z, Gogos CGPrinciples of Polymer Processing, John Wiley & Sons, New York, 1979 (1979)
  •  
  • 6. Kamal MR, Kuo Y, Doan PH, Polym. Eng. Sci., 15, 863 (1975)
  •  
  • 7. Tadmor Z, Broyer E, Gutfinger C, Polym. Eng. Sci., 14, 660 (1974)
  •  
  • 8. Kamal MR, Kenig S, Polym. Eng. Sci., 12, 302 (1972)
  •  
  • 9. Bakerdjian Z, Kamal MR, Polym. Eng. Sci., 17, 96 (1977)
  •  
  • 10. White JL, Dee HB, Polym. Eng. Sci., 14, 212 (1974)
  •  
  • 11. Chinag HHSimulation and Verification of Filling and Post-Filling Stages of the Injection-Molding Process, Ph.D. Thesis, University of Cornell, Ithaca, New York, 1989 (1989)
  •  
  • 12. Gherbelis G, Friedl C, SPE ANTEC, 92, 954 (1992)
  •  
  • 13. Malguarnera C, Manisali A, Polym. Eng. Sci., 2, 586 (1981)
  •  
  • 14. Wang K, Shen SF, Cohen C, Hieber CA, Ricketson RC, Wang VW, Emerman S, CIMP Progress ReportNo. 12, 12 (1986)
  •  
  • 15. Wang K, Shen SF, Cohen C, Hieber CA, CIMP Progress ReportNo. 13, 13 (1987)
  •  
  • 16. Moy H, Kamal MR, Polym. Eng. Sci., 20, 957 (1980)
  •  
  • 17. Wang K, Shen SF, Cohen C, Hieber CA, Isayev AI, CIMP Progress ReportNo. 10, 130 (1984)
  •  
  • 18. Cox W, Mentzer CC, Polym. Eng. Sci., 26, 488 (1986)
  •  
  • 19. Kim B, Jang W, Kim J, Choe S, J. Korean Ind. Eng. Chem.submitted
  •  
  • 20. KennedyFlow Analysis of Injection Molds, p. 63, Moldflow Corp. Wayland, MA, U.S.A., 1993 (1993)
  •  
  • 21. Injection Molding Training Program, KUMHO CHEMICALS, Inc., Central R & D, 1996 (1996)
  •  
  • 22. Austin C, Kennedy PMoldflow Data Theory, Moldflow Corp, Wayland, MA, U.S.A., 1992 (1992)
  •  
  • 23. Salamon BA, Donald RJ, J. Injection Molding Technol., 1, 36 (1997)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2001; 25(6): 855-865

    Published online Nov 25, 2001

  • 10.7317/pk.
  • Received on Feb 20, 2001
  • Revised on Nov 30, -0001
  • Accepted on Nov 30, -0001

Correspondence to

  • E-mail: