Article
  • Effects of Coating Thickness on Cavity Pressure and Surface Characteristics in In-Mold Coating

  • Yun Young Jeong and Ho Sang Lee†

  • Department of Aeronautical & Mechanical Design Engineering, Korea National University of Transportation, 50 Daehak-ro, Chungju-si, Chungbuk 27469, Korea

  • 인몰드 코팅에서 코팅두께가 캐비티 압력과 표면특성에 미치는 영향

  • 정윤영 · 이호상†

  • 한국교통대학교 항공기계설계학과

References
  • 1. K. I. Kim, C. L. Kim, and D. E. Kim, Int. J. Precis. Eng. Manuf., 13, 1633 (2012).
  •  
  • 2. M. Gruber, KraussMaffei Technologies, US Patent 0317893 (2008).
  •  
  • 3. M. Gruber, KraussMaffei Technologies, US Patent 0243148 (2009).
  •  
  • 4. H. S. Lee and D. M. Kim, J. Korean Soc. Precis. Eng., 30, 317 (2013).
  •  
  • 5. D. M. Kim and H. S. Lee, Int. J. Precis. Eng. Manuf., 17, 1333 (2016).
  •  
  • 6. J. R. Park and H. S. Lee, Trans. KSME(A), 39, 687 (2015).
  •  
  • 7. B. H. Seo and H. S. Lee, J. Korea Soc. Die & Mold Eng., 10, 1 (2016).
  •  
  • 8. H. S. Lee and D. M. Kim, Proc. KSMTE Conf., 152 (2014).
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2018; 42(1): 13-19

    Published online Jan 25, 2018

  • 10.7317/pk.2018.42.1.13
  • Received on Apr 21, 2017
  • Revised on Aug 2, 2017
  • Accepted on Aug 6, 2017

Correspondence to

  • Ho Sang Lee

  • Department of Aeronautical & Mechanical Design Engineering, Korea National University of Transportation, 50 Daehak-ro, Chungju-si, Chungbuk 27469, Korea

  • E-mail: lhs@ut.ac.kr