Article
  • Analysis of Mechanical Properties and Stress Crack Behavior of HDPE Geomembranes by Laboratory Installation Damage Test
  • Khan BA, Park JH, Kim SH, Chang YC, Oh TH, Lyoo WS, Jeon HY
  • 실내 시공시 손상시험에 의한 HDPE 지오멤브레인의 기계적 특성 및 응력균열거동 해석
  • Khan BA, 박주희, 김성희, 장용채, 오태환, 류원석, 전한용
References
  • 1. ASTM D4439, Standard Terminology for Geosynthetics, ASTM International, West Conshohocken, PA, USA (2003)
  •  
  • 2. Koerner RM, Designing with Geosynthetics, 5th Ed., Prentice Hall, New Jersey, USA, pp.429-611 (2005)
  •  
  • 3. Kim HK, Prediction of Long-Term behaviors of HDPE Geomembrane as Containment Barrier, Ph.D. Thesis,Chonnam National University, Gwangju, Korea (2004)
  •  
  • 4. Rowe RK, Sangam HP, Geotextiles and Geomembranes., 20, 77 (2002)
  •  
  • 5. Hsuan YG, Koerner RM, Lord AE, Jr, ASCE., 119, 1840 (1993)
  •  
  • 6. ASTM D883, Standard Terminology Relating to Plastics, ASTM International, West Conshohocken, PA, USA (2003)
  •  
  • 7. Rimal S, Ageing of HDPE Geomembranes Used To Contain Landfill Leachate or Hydrocarbon Spills, Ph.D. Thesis, Queen’s University, Kingston, Ontario, Canada (2009)
  •  
  • 8. Hamid AH, Amin MB, Maadhah AG, Handbook of Polymer Degradation, pp. 434-505 (1992)
  •  
  • 9. Rainey T, Barksdale R, Proceedings of Geosynthetics Conference, Vancouver, pp.729-742 (1993)
  •  
  • 10. Watts GRA and Brady KC, Fifth International Conference on Geotextiles, Geomembranes and Related Products, Singapore, pp.1159-1164 (1994)
  •  
  • 11. Brau G, First European Geosynthetics Conference, Maastricht, pp.145-150 (1996)
  •  
  • 12. Richardson GN, Geotechnical Fabrics Report, September, Roseville, MN, USA, p.98 (1998)
  •  
  • 13. ISO 10722-1, Geotextiles and geotextile related products-Procedure for simulating damage during installation- Part 1: Installation in granular materials.
  •  
  • 14. ASTM D5397-07, Standard Test method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test, ASTM International, West Conshohocken, PA, USA (2007)
  •  
  • 15. ASTM D6693-04, Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes, ASTM International, West Conshohocken, PA, USA (2010)
  •  
  • 16. ASTM D1004-08, Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting, ASTM International, West Conshohocken, PA, USA (2003)
  •  
  • 17. ASTM D4833, Test Method for Index Puncture Resistance of Geotextiles, Geomembranes and Related Products, ASTM International, West Conshohocken, PA, USA (2007)
  •  
  • 18. Narejo DB, Koerner RM, Wilson-Fahmy RF, GRI Report #10 on Experimental Puncture Behavior of HDPE Geomembranes Without, Then With, Various Protection Materials, Geosynthetic Research Institute, Drexel University (1993)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2011; 35(3): 203-209

    Published online May 25, 2011

  • 10.7317/pk.
  • Received on Oct 20, 2010
  • Revised on Nov 30, -0001
  • Accepted on Jan 6, 2011

Correspondence to

  • E-mail: