Article
  • Analysis of Residual Stress and Birefringence in a Transparent Injection Molded Article for Molding Condition
  • Woo JW, Hong JS, Kim HK, Lyu MY
  • 투명 사출품에서 성형조건에 따른 복굴절 및 잔류응력의 분석
  • 우정우, 홍진수, 김현구, 류민영
References
  • 1. Rosato DV, Rosato MG, Injection molding handbook, Springer Science & Business Media, 2012.
  •  
  • 2. Liu C, Manzione LT, Polym. Eng. Sci., 36(1), 1 (1996)
  •  
  • 3. Piotter V, Mueller K, Plewa K, Ruprecht R, Hausselt J, Microsyst. Technol., 8, 387 (2002)
  •  
  • 4. Yang SS, Kwon TH, Tran. Korean Soc. Mech. Eng. A, 26, 340 (2002)
  •  
  • 5. Dietz W, White JL, Clark ES, Polym. Eng. Sci., 18, 273 (1978)
  •  
  • 6. Janeschitz-Kriegl H, Rheol. Acta, 16, 327 (1977)
  •  
  • 7. Kim HY, Lyu MY, Polym. Sci. Technol., 20, 157 (2009)
  •  
  • 8. Isayev AI, “Thermal Stresses”, in Encyclopedia of Polymer Science and Engineering, John Wiley & Sons, New York, Vol 16, p 747 (1989).
  •  
  • 9. Jung JH, Youn JR, Korean J. Rheol., 8, 16 (1997)
  •  
  • 10. Kim HS, Kim JG, Lee JW, Korean J. Rheol., 8(1), 58 (1996)
  •  
  • 11. Cho JH, Park SR, Kim H, Lyu MY, Polym. Korea, 36(2), 131 (2012)
  •  
  • 12. Cho SH, Hong JS, Lyu MY, Polym. Korea, 35(5), 467 (2011)
  •  
  • 13. Hong JS, Park SR, Lyu MY, Polym. Korea, 35(1), 1 (2011)
  •  
  • 14. Kim C, Kim S, Oh H, Youn JR, Annual Conference of the Korean Society of Automotive Engineers, 3, 1982 (2005)
  •  
  • 15. Bang SH, Kim SW, Lee ES, Proceedings of the KSME 2006 Fall Annual Meeting, 1, 7 (2006)
  •  
  • 16. Aben H, Ainola L, Anton J, Opt. Laser. Eng., 33, 49 (2000)
  •  
  • 17. Ma CH, Huang JH, Chen H, Thin Solid Films, 418(2), 73 (2002)
  •  
  • 18. Lee SW, Joh HH, Hong JS, Lyu MY, Trans. Mater. Process., 20, 54 (2011)
  •  
  • 19. Lee DB, Nam YH, Lyu MY, Polym. Korea, 38(2), 193 (2014)
  •  
  • 20. Wales JLS, Philippoff W, Rheol. Acta, 12, 25 (1973)
  •  
  • 21. Min I, Yoon K, Korea-Aust. Rheol. J., 24(1), 73 (2012)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2016; 40(2): 175-180

    Published online Mar 25, 2016

  • 10.7317/pk.2016.40.2.175
  • Received on Aug 3, 2015
  • Revised on Nov 30, -0001
  • Accepted on Nov 1, 2015

Correspondence to

  • E-mail: