Article
  • Rheological and Processing Properties of Poly(lactic acid) Composites Filled with Ground Chestnut Shell

  • Mateusz Barczewski† and Olga Mysiukiewicz

  • Polymer Processing Division, Institute of Materials Technology, Faculty of Mechanical Engineering and Management, Poznan University of Technology, Piotrowo 3, 61-138 Poznan, Poland

  • 분쇄된 율피로 충전된 Poly(lactic acid) 복합재료의 유변학적 및 가공 특성
References
  • 1. V. Mittal, A. U. Chaudhry, and N. B. Matsko, J. Appl. Polym. Sci., 131, 40816 (2014).
  •  
  • 2. R. Auras, B. Harte, and S. Selke, Macromol. Biosci., 4, 835 (2004).
  •  
  • 3. P. K. Bajpai, I. Singh, and J. Madaan, J. Thermoplast. Compos., 27, 52 (2012).
  •  
  • 4. J. J. Maya and T. Sabu, Carbohydr. Polym., 71, 343 (2008).
  •  
  • 5. J. Ganster, J. Erdmann, and H. P. Fink, Polimery-W, 58, 423 (2013).
  •  
  • 6. D. Elvers, C. Hoon Song, A. Steinbüchel, and J. Leker, Polym. Rev., 56, 584 (2016).
  •  
  • 7. H. Moustafa, C. Guizani, and A. Dufresne, J. Appl. Polym. Sci., 134, 44498 (2017).
  •  
  • 8. S. Farah, D. G. Anderson, and R. Lander, Adv. Drug Deliver. Rev., 107, 367 (2016).
  •  
  • 9. D. Ndiaye, M. Gueye, and B. Diop, Arab. J. Sci. Eng., 38, 59 (2013).
  •  
  • 10. M. Kurańska, A. Prociak, S. Michałowski, U. Cabulis, and M. Kirpluks, Polimery-W, 61, 625 (2016).
  •  
  • 11. M. J. Schwarzkopf and M. D. Burnard, Environmental Impacts of Traditional and Innovative Forest-based Bioproducts, Springer Science+Business, Singapore, 2016.
  •  
  • 12. B. Kord, World Appl. Sci. J., 12, 1632 (2011).
  •  
  • 13. N. Saba, P. M. Tahir, and M. Jawaid, Polymers, 6, 2247 (2014).
  •  
  • 14. V. S. Osburg, M. Strack, and W. Toporowski, J. Clean. Prod., 110, 180 (2016).
  •  
  • 15. A. LeDuigou, P. Davies, and C. Baley, J. Biobased Mater. Bio., 5, 1 (2011).
  •  
  • 16. L. Sobczak, O. Brüggemann, and R. F. Putz, J. Appl. Polym. Sci., 127, 1 (2013)
  •  
  • 17. K. Salasinska, M. Polka, M. Gloc, and J. Ryszkowska, Polimery-W, 61, 255 (2016).
  •  
  • 18. A. K. Mohanty, M. Misra, and L. T. Drzal, Compos. Interf., 8, 313 (2001).
  •  
  • 19. S. Ojha, G. Raghavendra, and S. K. Acharya, Polym. Compos., 35, 180 (2014).
  •  
  • 20. M. A. Fuqua, V. S. Chevali, and C. A. Ulven, J. Appl. Polym. Sci., 127, 862 (2013)
  •  
  • 21. C. S. Wu, Y. C. Hsu, H. T. Liao, F. S. Yen, C. Y. Wang, and C. T. Hsu, J. Appl. Polym. Sci., 131, 40730 (2014).
  •  
  • 22. A. Kaymakci, N. Ayrilmis, and T. Gulec, BioResources, 8, 592 (2013).
  •  
  • 23. M. Barczewski, D. Matykiewicz, A. Krygier, J. Andrzejewski, and K. Skórczewska, J. Mater. Cycles Waste Manag., DOI:10.1007/s10163-017-0658-5 (2017).
  •  
  • 24. J.-G. Gai and Y. Cao, J. Appl. Polym. Sci., 129, 354 (2013).
  •  
  • 25. D. Shumigin, E. Tarasova, A. Krumme, and P. Meier, Mater. Sci.Medz., 17, 32 (2011).
  •  
  • 26. T. G. Mezger, The Rheology Handbook: For Users of Rotational and Oscillatory Rheometers, Vincentz Network, Hannover, 2006.
  •  
  • 27. H. Azizi and I. Ghasemi, Polym. Compos., 30, 429 (2009).
  •  
  • 28. S. N. Maiti, R. Subbarao, and Md. N. Ibrahim, J. Appl. Polym. Sci., 32, 1734 (1992).
  •  
  • 29. M. V. Gurp and J. Palmen, Rheol. Bull., 67, 5 (1998).
  •  
  • 30. A. Gupta, W. Simmons, G. T. Schueneman, D. Hylton, and E. A. Mintz, ACS Sustain. Chem. Eng., 5, 1711 (2017).
  •  
  • 31. A. Kasgoz, D. Akin, and A. Durmus, Polym. Eng. Sci., 52, 2645 (2012).
  •  
  • 32. V. Mazzanti, F. Mollica, and N. El Kissi, Polym. Compos., 37, 3460 (2016).
  •  
  • 33. T. Q. Li and M. P. Wolcott, Composites Part A, 35, 303 (2004).
  •  
  • 34. V. Hristov, E. Takacs, and J. Vlachopoulos, Polym. Eng. Sci., 49, 1204 (2006).
  •  
  • 35. C. H. Lee, S. M. Sapuan, J. H. Lee, and M. R. Hassan, SpringerPlus, 5, 1680 (2016).
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2018; 42(2): 267-274

    Published online Mar 25, 2018

  • 10.7317/pk.2018.42.2.267
  • Received on Aug 22, 2017
  • Revised on Sep 23, 2017
  • Accepted on Oct 23, 2017

Correspondence to

  • Mateusz Barczewski

  • Polymer Processing Division, Institute of Materials Technology, Faculty of Mechanical Engineering and Management, Poznan University of Technology, Piotrowo 3, 61-138 Poznan, Poland

  • E-mail: mateusz.barczewski@put.poznan.pl