Article
  • Effects of Process Conditions on Cavity Pressure and Surface Characteristics in In-Mold Coating of Film Insert Molded Parts
  • Jin Woo Son and Ho Sang Lee

  • Department of Aeronautical & Mechanical Design Engineering, Korea National University of Transportation, 50 Daehak-ro, Chungju-si, Chungbuk 27469, Korea

  • 필름 인서트 성형품의 인몰드 코팅에서 공정조건이 캐비티 압력과 표면특성에 미치는 영향
  • 손진우 · 이호상

  • 한국교통대학교 항공기계설계학과

References
  • 1. K. I. Kim, C. L. Kim, and D. E. Kim, Int. J. Prec. Eng. Manuf., 13, 1633 (2012).
  •  
  • 2. Y. W. Leong, S. Yamaguchi, M. Mizoguchi, H. Hamada, U. S. Ishiaku, and T. Tsujii, Polym. Eng. Sci., 44, 2327 (2004).
  •  
  • 3. M. Gruber, KraussMaffei Technologies, US Patent 0317893 (2008).
  •  
  • 4.  M. Gruber, KraussMaffei Technologies, US Patent 0243148 (2009).
  •  
  • 5.  H. S. Lee and D. M. Kim, J. Korean Soc. Precis. Eng., 30, 317 (2013).
  •  
  • 6.  D. M. Kim and H. S. Lee, Int. J. Precis. Eng. Manuf., 17, 1333 (2016).
  •  
  • 7. J. R. Park and H. S. Lee, Trans. of the KSME(A), 39, 687 (2015).
  •  
  • 8. B. H. Seo and H. S. Lee, J. Korea Soc. Die Mold Eng., 10, 1 (2016).
  •  
  • 9. Y. Y. Jeong and H. S. Lee, Polym. Korea, 42, 13 (2018).
  •  
  • 10. J. H. Kim, S. W. Woo, S.-K. Kim, and Y.-E. Yoo, Prec. KSMTE Spring Conf., 83 (2018).
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2019; 43(2): 211-217

    Published online Mar 25, 2019

  • 10.7317/pk.2019.43.2.211
  • Received on Sep 26, 2018
  • Revised on Oct 31, 2018
  • Accepted on Dec 5, 2018

Correspondence to

  • Ho Sang Lee
  • Department of Aeronautical & Mechanical Design Engineering, Korea National University of Transportation, 50 Daehak-ro, Chungju-si, Chungbuk 27469, Korea

  • E-mail: lhs@ut.ac.kr