Article
  • Modulus Modeling of PP/GF Composites by X-ray Micro-CT and Comparison with Experimental Data

  • Sung Sik Seo, Seok Min Lee*, Se Mi Kim**, Hee Jung Park***, and Kee Yoon Lee**,†

  • Analysis Support, R&D Center, Lotte Chemical Corp., 115 Gajeongbuk-ro, Yuseong-gu, Daejeon 34110, Korea
    *PM Development team, R&D Center, Lotte Chemical Corp., 115 Gajeongbuk-ro, Yuseong-gu, Daejeon 34110, Korea
    **Dept. of Polymer Science and Engineering, Chungnam National Univ., 99 Daehak-ro, Yuseong-gu, Daejeon 34134, Korea
    ***Western Seoul Center, Korea Basic Science Institute, 150 Bugahyeon-ro, Seodaemun-gu, Seoul 03759, Korea

  • X-선 마이크로-CT를 이용한 폴리프로필렌 유리섬유 복합체의 탄성계수 모델링과 실험 데이터와 비교

  • 서성식 · 이석민* · 김세미** · 박희정*** · 이기윤**,†

  • 롯데케미칼연구소 연구전략부문 분석지원담당, *롯데케미칼연구소 PM 개발팀 **충남대학교 고분자공학과, ***한국기초과학지원연구원, 서울서부센터

References
  • 1. J. D. Eshelby, Proc. Roy. Soc. Lond. A, 241, 376 (1957).
  •  
  • 2. R. Hill, J. Mech. Phys. Solids, 11, 357 (1963).
  •  
  • 3. T. Mori and K. Tanaka, Acta Metall., 21, 571 (1973).
  •  
  • 4. J. C. Halpin, Effects of Environmental Factors on Composite Materials, Technical Report AFML-TR-67-423, OHIO, 1969.
  •  
  • 5. J. C. Halpin, Primer on Composite Material Analysis, CRC Press, Florida, 1992.
  •  
  • 6. G. P. Tandon and G. J. Weng, Polym. Compos., 5, 327 (1984).
  •  
  • 7. P. J. Yoon, T. D. Fornes, and D. Paul, Polymer, 43, 6727 (2002).
  •  
  • 8. K. Y. Lee, S. I. Joo, S. K. Jeoung, H. J. Jun, and K. H. Kim, Polym. Korea, 31, 206 (2007).
  •  
  • 9. K. Y. Lee and D. R. Paul, Polymer, 46, 9064 (2005).
  •  
  • 10. H. Bos, J. Müssig, and M. Van den Oever, Composites Part A, 37, 1591 (2006).
  •  
  • 11. T. V. Khanh, J. Denault, P. Habib, and A. Low, Comp. Sci. Technol., 40, 423 (1991).
  •  
  • 12. S. Y. Fu, X. Hu, and C. Y. Yue, Mater. Sci. Res. Int., 5, 74 (1999).
  •  
  • 13. R. von Turkovich and L. Erwin, Polym. Eng. Sci., 23, 743 (1983).
  •  
  • 14. J. Denault, T. V. Khanh, and B. Foster, Polym. Comp., 10, 313 (1989).
  •  
  • 15. L. Biolzi, L. Castellani, and I. Pitacco, J. Mater. Sci., 29, 2507 (1994).
  •  
  • 16. S.Y. Fu and B. Lauke, Composites Part A, 29, 575 (1998).
  •  
  • 17. S. Y. Fu, B. Lauke, E. Mader, C. Y. Yue, and X. Hu, Composites Part A, 31, 1117 (2000).
  •  
  • 18. H. Bijsterbosch and R. J. Gaymans, Polym. Comp., 16, 363 (1995).
  •  
  • 19. P. T. Curtis, M. G. Bader, and J. E. Bailey, J. Mater. Sci., 13, 377 (1978).
  •  
  • 20. D. M. Bigg, Polym. Comp., 6, 20 (1985).
  •  
  • 21. K. Takahashi and N. S. Choi, J. Mater. Sci., 26, 4648 (1991).
  •  
  • 22. M. R. Piggott, J. Comp. Mater., 28, 588 (1994).
  •  
  • 23. P. A. Templeton, J. Reinf. Plast. Comp., 9, 210 (1990).
  •  
  • 24. S. Y. Fu and B. Lauke, Compos. Sci. Technol., 56, 1179 (1996).
  •  
  • 25. W. K. Chin, H. T. Liu, and Y. D. Lee, Polym. Comp., 9, 27 (1988).
  •  
  • 26. F. Ularych, M. Sova, J. Vokrouhlecky, and B. Turcic, Polym. Comp., 14, 229 (1993).
  •  
  • 27. H. Shen, S. Nutt, and D. Hull, Compos. Sci. Technol., 64, 2113 (2004).
  •  
  • 28. J. C. Tan, J. A. Elliott, and T. W. Clyne, Adv. Eng. Mater., 8, 495 (2006).
  •  
  • 29. A. Alemdar, H. Zhang, M. Sain, G. Cescutti, and J. Mussig, Adv. Eng. Mater., 10, 126 (2008).
  •  
  • 30. J. Ryu and M.-Y. Lyu, Int. Polym. Process., 29, 3 (2014).
  •  
  • 31. C. G. Gogos, C.-F. Huang, and L. R. Schmidt, Polym. Eng. Sci., 26, 1457 (1986).
  •  
  • 32. D. J. Coyle, J. W. Blake, and C. W. Macosko, AIChE J., 33, 1168 (1987).
  •  
  • 33. X. Jin, Polym. Eng. Sci., 33, 1238 (1993).
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2019; 43(3): 465-474

    Published online May 25, 2019

  • 10.7317/pk.2019.43.3.465
  • Received on Feb 22, 2019
  • Revised on Mar 19, 2019
  • Accepted on Mar 19, 2019

Correspondence to

  • Kee Yoon Lee

  • Dept. of Polymer Science and Engineering, Chungnam National Univ., 99 Daehak-ro, Yuseong-gu, Daejeon 34134, Korea

  • E-mail: kylee@cnu.ac.kr