Article
  • Effect of Prepreg Angle-Ply on the Dynamic, Mechanical, Tensile, Flexural, and Impact Properties of Non-Crimp Carbon Fiber Fabric/Epoxy Composites
  • Naeun Jeong and Donghwan Cho

  • Department of Polymer Science and Engineering, Kumoh National Institute of Technology, Gumi, Gyeongbuk 39177, Korea

  • 크림프가 없는 탄소섬유직물/에폭시 복합재료의 동역학, 인장, 굴곡 및 충격 특성에 미치는 프리프레그 Angle-Ply의 영향
  • 정나은 · 조동환

  • 금오공과대학교 고분자공학과

References
  • 1. G.Yang, M. Park, and S.-J. Park, Compos. Commun., 14, 34 (2019).
  •  
  • 2. D.Hwang and D. Cho, J. Ind. Eng. Chem., 80, 335 (2019). 
  •  
  • 3. S.-H. Go, H.-G. Kim, H.-J. Shin, M.-S. Lee, H.-G.Yoon, and L.-K. Kwac, Carbon Lett., 21, 23 (2017).
  •  
  • 4. T.Yu, Z. Zhang, S. Song, Y. Bai, and D. Wu, Compos. Struc., 225,111147 (2019).
  •  
  • 5. A.B. Strong, Fundamental of composite manufacturing: Materials, methods, and pplication, 2nd Edition, Society of Manufacturing Engineers, Dearborn, MI,USA, 2008.
  •  
  • 6. Y.Yuan, X. Yao, B. Liu, H. Yang, and H. Imtiaz, Compos. Struc., 176,729 (2017).
  •  
  • 7. V.V. VenuMadhav, A. V. S. S. K. S. Gupta, and V. B. Murthy, Mater. Today:Proc., 5, 6045 (2018).
  •  
  • 8. J.F. Timmerman, M. S. Tillman, B. S. Hayes, and J. C. Seferis, Composites PartA, 33, 323 (2002).
  •  
  • 9. E.C. Botelho, L. C. Pardini, and M. C. Rezende, Mater. Sci., 41,7111 (2006).
  •  
  • 10. X.Wu, J. D. Fuller, M. L. Longana, and M. R. Wisnom, Composites Part A, 111,62 (2018).
  •  
  • 11. J.-M.Lee, B.-M. Kim, and D.-C. Ko, Compos. Struc., 213, 144 (2019).
  •  
  • 12. J.Wulfsberg, A. Herrmann, G. Ziegmann, G. Lonsdorfer, N. Stöß, and M. Fette, Proc.Eng., 81, 1601 (2014).
  •  
  • 13. N.Q. Nguyen, M. Mehdikhani, I. Straumit, L. Gorbatikh, L. Lessard, and S. V.Lomov, Composites Part A, 104, 14 (2018).
  •  
  • 14. L. A. Khan, A. Kausar, and R. J. Day, Aero. Sci. Technol.65, 100 (2017).
  •  
  • 15. D. Munalli, G. Dimitrakis, D. Chronopoulos, S. Greedy,and A. Long, Composites Part B, 173, 106906 (2019).
  •  
  • 16. Y.Ma, S. Jin, M. Ueda, T. Yokozeki, Y. Yang, F. Kobayashi, H. Kobayashi, T.Sugahara, and H. Hamada, Composites Part B, 154, 90 (2018).
  •  
  • 17. N.A. Siddiqui, S. U. Khan, P. C. Ma, C. Y. Li, and J.-K. Kim, Composites PartA, 42, 1412 (2011).
  •  
  • 18. G.Czél, S. Pimenta, M. R. Wisnom, and P. Robinson, Compos. Sci. Technol., 106,110 (2015).
  •  
  • 19. B.A. Newcomb, Polym. Test., 77, 105859 (2019).
  •  
  • 20. W.Stark, Polym. Test., 32, 231 (2013).
  •  
  • 21. N.Forintos and T. Czigany, Composites Part B, 162, 331 (2019).
  •  
  • 22. M.Rahman, S. Ramakrishna, J. R. S. Prakash, and D. C. G. Tan, Mater. Process.Technol., 89-90, 292 (1999).
  •  
  • 23. A.Cherniaev, Y. Zeng, D. Cronin, and J. Montesano, Polym. Test., 76,365 (2019).
  •  
  • 24. S. Nonn, C. Kralovec, and M. Schagerl, Composites Part A115, 57 (2018).
  •  
  • 25. T. Sabiston, B. Li, J. Kang, J. Liang, and C.Engler-Pinto, Proc. Struc. Integ., 17, 666 (2019).
  •  
  • 26. F.W. Crossman and A. S. D. Wang, Compos. Mater., 14, 71 (1980).
  •  
  • 27. D.Leguillon, G. Marion, R. Harry, and F. Lecuyer, Compos. Sci. Technol., 61,377 (2001). 
  •  
  • 28. J.D. Fuller and M. R. Wisnom, Composites Part A, 69, 64 (2015).
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2018 Impact Factor : 0.500
  • Indexed in SCIE

This Article

  • 2020; 44(1): 61-69

    Published online Jan 25, 2020

  • 10.7317/pk.2020.44.1.61
  • Received on Sep 17, 2019
  • Revised on Nov 18, 2019
  • Accepted on Nov 20, 2019

Correspondence to

  • Donghwan Cho
  • Department of Polymer Science and Engineering, Kumoh National Institute of Technology, Gumi, Gyeongbuk 39177, Korea

  • E-mail: dcho@kumoh.ac.kr