Article
  • Variations in the Impact Strength of Material Extrusion-type 3D Printed Specimens Depending on Tool Path and Building Direction
  • In Young Woo and Min-Young Lyu

  • Department of Mechanical Design and Manufacturing Engineering, Graduate School of Seoul National University of Science and Technology, 232 Gongneung-ro, Nowon-gu, Seoul 01811, Korea

  • 재료 압출 방식 3D 프린팅 시편에서 적층 경로와 적층 방향에 따른 충격강도의 변화
  • 우인영 · 류민영

  • 서울과학기술대학교 대학원 기계디자인금형공학과

References
  • 1. M.-Y. Lyu and H.-Y. Kim, Poly. Sci. Technol., 20, 157 (2009).
  •  
  • 2. S. H. Paek, KIC News, 18, 1 (2015).
  •  
  • 3. S.Kumar and J.-P Kruth, Mater. Des., 31, 850 (2010).
  •  
  • 4. L. Wang and D. J. Gardner, Polymer, 113, 74 (2017).
  •  
  • 5. L. Wang, W. M. Gramlich, and D. J. Gardner, Polymer, 114, 242 (2017).
  •  
  • 6. T. D. McLouth, J. V. Severino, P. M. Adams, D. N. Patel, and R. J. Zaldivar, Addit. Manuf., 18, 103 (2017).
  •  
  • 7. J. S. Kim, N. Jo, J. S. Nam, and S. W. Lee, Trans. Korea Soc. Mech. Eng., 41, 607 (2017).
  •  
  • 8. R. J. Jaldivar, D. B. Witkin, T. McLouth, D. N. Patel, K. Schmitt, and J. P. Nokes, Addit. Manuf., 13, 71 (2017).
  •  
  • 9. B. Huang and S. Singamneni, J. Compos. Mater., 49, 363 (2015).
  •  
  • 10. S. J. Park, J. H. Park, M.-Y. Lyu, M. S. Koo, H. J. Rho, and S. H. Cho, Polym. Korea, 41, 531 (2017).
  •  
  • 11. H. S. Yoon, M.-Y. Lyu, and S. C. Jin, Polym. Korea, 42, 752 (2018).
  •  
  • 12. S. J. Park, J. H. Park, K. H. Lee, and M.-Y. Lyu, Polym. Korea, 40, 846 (2016).
  •  
  • 13. O. S. Es-Said, J. Foyos, R. Noorani, M. Mendelson, R. Marloth, and B. A.Pregger, Mater. Manuf. Process., 15, 107 (2000)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2018 Impact Factor : 0.500
  • Indexed in SCIE

This Article

  • 2020; 44(4): 471-478

    Published online Jul 25, 2020

  • 10.7317/pk.2020.44.4.471
  • Received on Feb 18, 2020
  • Revised on Mar 23, 2020
  • Accepted on Apr 13, 2020

Correspondence to

  • Min-Young Lyu
  • Department of Mechanical Design and Manufacturing Engineering, Graduate School of Seoul National University of Science and Technology, 232 Gongneung-ro, Nowon-gu, Seoul 01811, Korea

  • E-mail: mylyu@seoultech.ac.kr,