Article
  • Influence of Sulfur/Accelerator Ratio on Tensile Properties and Structural Inhomogeneity of Natural Rubber
  • Abdulhakim Masa , Siriwat Soontaranon*, and Nabil Hayeemasae**

  • Sino-Thai International Rubber College, Prince of Songkla University, Hat Yai, Songkhla 90110, Thailand
    *Synchrotron Light Research Institute, Muang District, Nakhon Ratchasima 30000, Thailand
    **Department of Rubber Technology and Polymer Science, Faculty of Science and Technology, Prince of Songkla University, Pattani Campus, Pattani 94000, Thailand

  • Sulfur/Accelerator 비율이 천연고무 인장특성 및 구조불균형에 미치는 영향 연구
References
  • 1. P. A. Ciullo and N. Hewitt, The Rubber Formulary, William Andrew, New York, 1999.
  •  
  • 2. R. N. Datta, Rubber Curing Systems, Smithers Rapra Technology, Shawbury, 2002.
  •  
  • 3. K. Bruning, K. Schneider, S. V. Roth, and G. Heinrich, Polymer, 54, 6200 (2013).
  •  
  • 4. Y. Fukahori, Polymer, 51, 1621 (2010).
  •  
  • 5. B. Huneau, Rubber Chem. Technol., 84, 425 (2011).
  •  
  • 6. M. Tosaka, K. Senoo, S. Kohjiya, and Y. Ikeda, J. Appl. Phys., 101, 084909 (2007).
  •  
  • 7. M. Tosaka, S. Kohjiya, S. Murakami, S. Poompradub, Y. Ikeda, S. Toki, I. Sics, and B. S. Hsiao, Rubber Chem. Technol., 77, 711 (2004).
  •  
  • 8. L. Gonzalez, A. Rodriguez, J. L. Valentin, A. Marcos-Fernandez, and P. Posadas, Kautschuk und Gummi Kunststoffe, 58, 638 (2005).
  •  
  • 9. F. Zhao, W. Bi, and S. Zhao, J. Macromol. Sci. B, 50, 1460 (2011).
  •  
  • 10. K. Boonkerd, C. Deeprasertkul, and K. Boonsomwong, Rubber Chem. Technol., 89, 450 (2016).
  •  
  • 11. S. Trabelsi, P. A. Albouy, and J. Rault, Macromolecules, 36, 7624 (2003).
  •  
  • 12. J. M. Chenal, C. Gauthier, L. Chazeau, L. Guy, and Y. Bomal, Polymer, 48, 6893 (2007).
  •  
  • 13. J. M. Chenal, L. Chazeau, L. Guy, Y. Bomal, and C. Gauthier, Polymer, 48, 1042 (2007).
  •  
  • 14. Z.-T. Xie, M.-C. Luo, C. Huang, L.-Y. Wei, Y.-H. Liu, X. Fu, G. Huang, and J. Wu, Polymer, 151, 279 (2018).
  •  
  • 15. P. J. Flory and J. Rehner, Jr., J. Chem. Phys., 11, 512 (1943).
  •  
  • 16. S. Musto, V. Barbera, V. Cipolletti, A. Citterio, and M. Galimberti, Express Polym. Lett., 11, 435 (2017).
  •  
  • 17. B. H. Park, I. G. Jung, and S. S. Park, Polym. Korea, 25, 63 (2001).
  •  
  • 18. S. Rabiei and A. Shojaei, Eur. Polym. J., 81, 98 (2016).
  •  
  • 19. H. Nabil, H. Ismail, and A. R. Azura, J. Vinyl Addit. Technol., 21, 79 (2015).
  •  
  • 20. A. Masa, R. Saito, H. Saito, T. Sakai, A. Kaesaman, and N. Lopattananon, J. Appl. Polym. Sci., 133, 43214 (2016).
  •  
  • 21. M. Tosaka, Polym. J., 39, 1207 (2007).
  •  
  • 22. G. R. Hamed and N. Rattanasom, Rubber Chem. Technol., 75, 935 (2002).
  •  
  • 23. B. Ozbas, S. Toki, B. S. Hsiao, B. Chu, R. A. Register, I. A. Aksay, R. K. Prudhomme, and D. H. Adamson, J. Polym. Sci., Part B: Polym. Phys., 50, 718 (2012).
  •  
  • 24. M. Tosaka, S. Murakami, S. Poompradub, S. Kohjiya, Y. Ikeda, S. Toki, I. Sics, and B. S. Hsiao, Macromolecules, 37, 3299 (2004).
  •  
  • 25. Y. Ikeda, Y. Yasuda, K. Hijikata, M. Tosaka, and S. Kohjiya, Macromolecules, 41, 5876 (2008).
  •  
  • 26. E. H. Andrews, J. Polym. Sci., Part B: Polym. Phys., 4, 668 (1966).
  •  
  • 27. W. Salgueiro, A. Somoza, I. L. Torriani, and A. J. Marzocca, J. Polym. Sci., Part B: Polym. Phys., 45, 2966 (2007).
  •  
  • 28. N. Osaka, M. Kato, and H. Saito, J. Appl. Polym. Sci., 129, 3396 (2013).
  •  
  • 29. Y. Ikeda, N. Higashitani, K. Hijikata, Y. Kokubo, Y. Morita, M. Shibayama, N. Osaka, T. Suzuki, H. Endo, and S. Kohjiya, Macromolecules, 42, 2741 (2009).
  •  
  • 30. W. Sainumsai, S. Toki, S. Amnuaypornsri, A. Nimpaiboon, J. Sakdapipanich, L. Rong, B. S. Hsiao, and K. Suchiva, Rubber Chem. Technol., 90, 728 (2017).
  •  
  • 31. P. Debye and A. M. Bueche, J. Appl. Phys., 20, 518 (1949).
  •  
  • 32. A. Izumi, Y. Shudo, T. Nakao, and M. Shibayama, Polymer, 103, 152 (2016).
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2018 Impact Factor : 0.500
  • Indexed in SCIE

This Article

  • 2020; 44(4): 519-526

    Published online Jul 25, 2020

  • 10.7317/pk.2020.44.4.519
  • Received on Mar 14, 2020
  • Revised on Apr 16, 2020
  • Accepted on Apr 22, 2020

Correspondence to

  • Abdulhakim Masa
  • Sino-Thai International Rubber College, Prince of Songkla University, Hat Yai, Songkhla 90110, Thailand

  • E-mail: abdulhakim.m@psu.ac.th