Article
  • Variations in the Tensile Strength in Material Extrusion-type 3D Printed Specimens for Various Tool Paths

  • In Young Woo and Min-Young Lyu†

  • Department of Mechanical Design and Manufacturing Engineering, Graduate School of Seoul National University of Science and Technology, 232 Gongneung-ro, Nowon-gu, Seoul 01811, Korea

  • 재료 압출 방식 3D 프린팅 시편에서 적층 경로에 따른 인장강도의 변화

  • 우인영 · 류민영†

  • 서울과학기술대학교 기계디자인금형공학과

References
  • 1. Y. M. Shin, Polym. Sci. Tech., 26, 404 (2015).
  •  
  • 2. Z. Jinwen and P. Anhua, Adv. Mater. Res., 538, 444 (2012).
  •  
  • 3. W.-J. Kim, J. Korean Soc. Manuf. Process. Eng., 11, 146 (2012).
  •  
  • 4. J. H. Mo, H. S. Hong, and M.-Y. Lyu, Trans. Mater. Process., 10, 211 (2003).
  •  
  • 5. S. J. Park, J. H. Park, M.-Y. Lyu, M. S. Koo, H. J. Rho, and S. H. Cho, Polym. Korea, 41, 531 (2017).
  •  
  • 6. M. Spoerk, J. G.-Gutierrez, J. Sapkota, S. Schuschnigg, and C. Holzer, Plast. Rubber Compos., 47, 17 (2017).
  •  
  • 7. J. M. Chacon, M. A. Caminero, E. G.-Plaza, and P. J. Nunez, Mater. Des., 124, 143 (2017).
  •  
  • 8. W. Wu, P. Geng, G. Li, D. Zhao, H. Zhang, and J. Zhao, Materials, 8, 5834 (2015).
  •  
  • 9. K. G. J. Christiyan, U. Chandrasekhar, and K. Venkateswarlu, IOP Conf. Ser. Mater. Sci. Eng., 114, 012109 (2016).
  •  
  • 10. Q. Sun, G. M. Rizvi, C. T. Bellehumeur, and P. Gu, Rapid Prototyp. J., 14, 72 (2008).
  •  
  • 11. S. Kalpakjian and S. Schmid, Manufacturing Processes for Engineering Materials-5th Edition, trans. by N. S. Kim, SungJIn Media Co., Seoul, 2014.
  •  
  • 12. I. Y. Woo, D. Y. Kim, H. P. Kang, and M.-Y. Lyu, Elast. Compos., 55, 46 (2020).
  •  
  • 13. H. S. Yoon, M.-Y. Lyu, and S. C. Jin, Polym. Korea, 42, 752 (2018).
  •  
  • 14. S. K. Lee, Y. R. Kim, S. H. Kim, and J. H. Kim, J. Korean Soc. Manuf. Process. Eng., 17, 130 (2018).
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2020; 44(6): 769-775

    Published online Nov 25, 2020

  • 10.7317/pk.2020.44.6.769
  • Received on May 7, 2020
  • Revised on Jul 2, 2020
  • Accepted on Jul 2, 2020

Correspondence to

  • Min-Young Lyu

  • Department of Mechanical Design and Manufacturing Engineering, Graduate School of Seoul National University of Science and Technology, 232 Gongneung-ro, Nowon-gu, Seoul 01811, Korea

  • E-mail: mylyu@seoultech.ac.kr