Article
  • Development of Polypropylene Powder for SLS 3-D Printing by Solution Precipitation Method
  • Hee-Soo Jang, Jongwon Kang*, and Ho-Jong Kang

  • Department of Polymer Science and Engineering, Dankook University, Gyeonggi-do 16890, Korea
    *LOTTE Chemical, 115 Gajeongbuk-ro, Yuseong-gu, Daejon 34119, Korea

  • 용액 침전법에 의한 SLS 3-D프린팅용 폴리프로필렌 파우더 개발
  • 장희수 · 강종원* · 강호종

  • 단국대학교 고분자공학과, *롯데케미칼

  • Reproduction, stored in a retrieval system, or transmitted in any form of any part of this publication is permitted only by written permission from the Polymer Society of Korea.

References
  • 1. Shofner, M. L.; Lozano, K.; Rodríguez‐Macías, F. J.; Barrera, E. V. Nanofiber‐Reinforced Polymers Prepared by Fused Deposition Modeling, J. Appl. Polym. Sci. 2003, 89, 3081-3090.
  •  
  • 2. Carneiro, O. S.; Silva, A. F.; Gomes, R. Fused Deposition Modeling with Polypropylene, Mater. Des. 2015, 83, 768-776.
  •  
  • 3. Lan, P.; Chou, S.; Chen, L.; Gemmill, D. Determining Fabrication Orientations for Rapid Prototyping with Stereolithography Apparatus. Comput. Aided Des. 1997, 29, 53-62.
  •  
  • 4. Nizam, A.; Gopai, R. N.; Naing, L.; Hakim, A. B.; Samsudin, A. R. Dimensional Accuracy of the Skull Models Produced by Rapid Prototyping Technology Using Stereolithography Apparatus. Arch. Orofac. Sci. 2006, 1, 60-66.
  •  
  • 5. Kruth, J-P.; Mercelis, P.; Van Vaerenbergh, J.; Froyen, L.; Rombouts, M. Binding Mechanisms in Selective Laser Sintering and Selective Laser Melting. Rapid Prototyp. J. 2005, 11, 26-36.
  •  
  • 6. Kruth, J.; Wang, X.; Laoui, T.; Froyen, L. Lasers and Materials in Selective Laser Sintering, Assem. Autom. 2003, 23, 357-371.
  •  
  • 7. Park, J. B.; Lee, D. H.; Kang, H. J. Effect of Laser Scanning Speed on the Formation of Sintered Layer in SLS 3-D Printing. Polym. Korea 2018, 42, 747-751.
  •  
  • 8. Wang, S.; Liu, J.; Chu, L.; Zou, H.; Zhang, S.; Wu, C. Preparation of Polypropylene Microspheres for Selective Laser Sintering via Thermal‐induced Phase Separation: Roles of Liquid–liquid Phase Separation and Crystallization, Polym. Phys. 2017, 55, 320-329.
  •  
  • 9. Hollahan, J. L.; US Patent 0039135 A1, 2019.
  •  
  • 10. Santomaso, A.; Lazzaro, P.; Canu, P. Powder flowability and Density Ratios: the Impact of Granules Packing. Chem. Eng. Sci. 2003, 58, 2857-2874.
  •  
  • 11. Wang, R.; Wang, L.; Zhao, L.; Liu, Z. Influence of Process Parameters on Part Shrinkage in SLS. Inter. J. Adv. Manuf. Tech. 2007, 33, 498-504.
  •  
  • 12. Zarringhalam, H.; Hopkinson, N.; Kamperman, N. F.; de Vlieger, J. J. Effect of the Degree of Particle Melt on Mechanical Properties in Selective Laser-sintered Nylon-12 Parts. Mat. Sci. Eng. 2006, 435-436, 172-180.
  •  
  • 13. Ziemian, C.; Sharma, M.; Ziemian, S. Anisotropic Mechanical Properties of ABS Parts Fabricated by Fused Deposition Modelling. In Mechanical Engineering; Gokçek, M., Ed., In Tech: Croatia, 2012; pp 159-180.
  •  
  • 14. Zhu, W.; Yan, C.; Shi, Y.; Wen, S.; Han, C.; Cai, C.; Liu, J.; Shi, Y. Study on the Selective Laser Sintering of a Low-isotacticity Polypropylene Powder. Rapid Prototyp. J. 2016, 22, 621-629.
  •  
  • 15. Mys, N.; Haverans, T.; Verberckmoes, A.; Cardon, L. Processing of Syndiotactic Polystyrene to Microspheres for Part Manufacturing through Selective Laser Sintering. Polymers. 2016, 8, 383.
  •  
  • 16. Berretta, S.; Evans, K. E.; Ghita, O. Processability of PEEK, a New Polymer for High Temperature Laser Sintering (HT-LS). Eur. Polym. 2015,68, 243-266.
  •  
  • 17. Tang, X.; Qin, Y.; Xu, X.; Guo, D.; Ye, W.; Wu, W.; Li, R. Fabrication and In Vitro Evaluation of 3D Printed Porous Polyetherimide Scaffolds for Bone Tissue Engineering. BioMed Res. Inter. 2019,2019, 2076138.
  •  
  • 18. Lebrun, P.; Krier, F.; Mantanus, J.; Grohganz, H.; Yang, M.; Evard, B.; Rantanen, J.; Hubert, P. Design Space Approach in the Optimization of the Spray-drying Process. Eur. J. Pharm. Biopharm. 2012, 80, 226-234.
  •  
  • 19. Anestiev, L. A.; Froyen, L. Model of the Primary Rearrangement Processes at Liquid Phase Sintering and Selective Laser Sintering due to Biparticle Interactions. J. Appl. Phys. 1999, 86, 4008.
  •  
  • 20. Park, J. B.; Kang, H. J. Characteristics of Organic-Inorganic Hybrid Material for SLS 3-D Printing. Polym. Korea. 2018, 42, 931-935.
  •  
  • 21. ASTM, B527-93. 1993: Standard Test Method for Determination of Tap Density of Metallic Powders and Compounds, West Conshohocken, PA: ASTM.
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2021; 45(2): 253-260

    Published online Mar 25, 2021

  • 10.7317/pk.2021.45.2.253
  • Received on Oct 26, 2020
  • Revised on Dec 10, 2020
  • Accepted on Dec 17, 2020

Correspondence to

  • Ho-Jong Kang
  • Department of Polymer Science and Engineering, Dankook University, Gyeonggi-do 16890, Korea

  • E-mail: hjkang@dankook.ac.kr