Article
  • Synthesis and Characterization of Poly(lactic acid-co-glycolic acid-co-ε-caprolactone) and Its Pressure Sensitive Adhesive Property

  • Minjian Cao, Zhean Xia† , Xiangxin Ran, and Jinglong Zou

  • School of Material Science and Engineering, East China University of Science and Technology, Shanghai 200237, China

  • Poly(lactic acid-co-glycolic acid-co-ε-caprolactone)의 합성, 분석 및 감압 접착 특성

  • Reproduction, stored in a retrieval system, or transmitted in any form of any part of this publication is permitted only by written permission from the Polymer Society of Korea.

References
  • 1. Czech, Z.; Butwin, A. Development of Photoreactive UV-Crosslinkable Solvent-free Acrylic Pressure-sensitive Adhesives Coated at Room Temperature and Used for Removable and Repositionable Self-adhesive Materials. Polym. J. Chem. Technol. 2011, 13, 31-34.
  •  
  • 2. Czech, Z. Solvent-based Pressure-sensitive Adhesives for Removable Products. Int. J. Adhes. Adhes. 2006, 26, 414-418.
  •  
  • 3. Creton, C. Pressure-sensitive Adhesives: An Introductory Course. MRS Bull. 2003, 28, 434-439.
  •  
  • 4. Beak, S. S.; Hong, S.; Hwang, S. H. Preparation and Adhesion Performance of Transparent Acrylic Pressure Sensitive Adhesives Containing Biomass-derived Menthol Moiety. Polym. Korea 2016, 40, 678-683.
  •  
  • 5. Cohen, E.; Binshtok, O.; Dotan, A.; Dodiuk, H. Prospective Materials for Biodegradable and/or Biobased Pressure-sensitive Adhesives: A Review. J. Adhes. Sci. Technol. 2013, 27, 1998-2013.
  •  
  • 6. David, S. B.; Sathiyalekshmi, K.; Raj, G. A. G. Studies on Acrylated Epoxydised Triglyceride Resin-co-butyl Methacrylate Towards the Development of Biodegradable Pressure Sensitive Adhesives. Mater. Sci.-Mater. Med. 2009, 20, 61-70.
  •  
  • 7. Riyajan, S. A.; Pheweaw, N. Modification of Skim Rubber Blended With Poly(Vinyl Alcohol) to be Applied as a Bio- degradable Pressure-sensitive Adhesive: Effect of 2,6-di-t-butyl-4-methylphenol and Hydrocarbon Resin. Rubber Chem. Technol. 2012, 85, 547-558.
  •  
  • 8. Lee, Y. M.; Shim, C. R.; Lee, Y.; Kim, H. N.; Jo, S. A.; Song, J. E.; Lee, D.; Khang, G. Effect of Demineralized Bone Particle Gel Penetrated into Poly(lactic-co-glycolic acid) Scaffold on the Regeneration of Chondrocyte; In Vivo Experiment. Polym. Korea 2012, 36, 789-794.
  •  
  • 9. Eom, S.; Yoo, S. C.; Kim, Y. K.; Lee, Y. H.; Lee, E. Y.; Yu, H.; Lee, D.; Khang, G. Effect of Cosurfactants on the Release Behavior of Zaltoprofen-loaded PLGA Microspheres in In Vitro: Preparation and Characterization. Polym. Korea 2010, 34, 333-340.
  •  
  • 10. Kamali, H.; Khodaverdi, E.; Hadizadeh, F. Ring-opening Poly- merization of PLGA-PEG-PLGA Triblock Copolymer in Super- critical Carbon Dioxide. J. Supercrit. Fluids 2018, 137, 9-15.
  •  
  • 11. Wusiman, A.; Xu, S. W.; Ni, H. Y.; Gu, P. F.; Liu, Z. G.; Zhang, Y.; Qiu, T. X.; Hu, Y. L.; Liu, J. G.; Wu, Y.; Wang, D. Y.; Lu, Y. Immunomodulatory Effects of Alhagi Honey Polysaccharides Encapsulated into PLGA Nanoparticles. Carbohydr. Polym. 2019, 211, 217-226.
  •  
  • 12. Vert, M.; Mauduit, J.; Li, S. Biodegradation of PLA/GA Polymers: Increasing Complexity. Biomaterials 1994, 15, 1209-1213.
  •  
  • 13. Liu, J. Y.; Liu, L. J. Ring-opening Polymerization of ε-caprolactone Initiated by Natural Amino Acids. Macromolecules 2004, 37, 2674-2676.
  •  
  • 14. Sudesh, K.; Abe, H.; Doi, Y. Synthesis, Structure and Properties of Polyhydroxyalkanoates: Biological Polyesters. Prog. Polym. Sci. 2000, 25, 1503-1555.
  •  
  • 15. Lenoir, S.; Riva, R.; Lou, X.; Detrembleur, C.; Jerome, R.; Lecomte, P. Ring-Opening Polymerization of a-Chloro-e-caprolactone and Chemical Modification of Poly(a-chloro-e-caprolactone) by Atom Transfer Radical Processes. Macromolecules 2004, 37, 4055-4061.
  •  
  • 16. Hyun, H.; Kim, M. S.; Khang, G.; Rhee, J. M.; Lee, H. B. Synthesis and Characterization of Linear and Branched Copolymers of Poly(ethylene glycol) and Poly(ε-caprolactone). Polym. Korea 2006, 30, 146-151.
  •  
  • 17. Cho, K. Y.; Lee, K. S.; Park, J. K. Effect of Graft Copolymer Composition on the Compatibility of Biodegradable PCL/PCL-g-PEG Blend. Polymer 2009, 33, 219-223.
  •  
  • 18. Cohn, D.; Lando, G. Tailoring lactide/caprolactone co-oligomers as tissue adhesives. Biomaterials 2004, 25, 5875-5884.
  •  
  • 19. Liu, Y. X.; Bai, X. Z.; Liang, A. Synthesis, Properties, and In Vitro Hydrolytic Degradation of Poly(d,l-lactide-co-glycolide-co-ε-caprolactone). Int. J. Polym. Sci. 2016, 2016, 1-9.
  •  
  • 20. Council, P. S. T. Test methods for pressure sensitive adhesive tapes; Illinois: Pressure Sensitive Tape Council: Northbrook, 2004.
  •  
  • 21. Fang, C.; Lin, Z. X. Effect of Propyleneimine External Cross-linker on the Properties of Acrylate Latex Pressure Sensitive Adhesives. Int. J. Adhes. Adhes. 2015, 61, 1-7.
  •  
  • 22. Kajtna, J.; Krajnc, M. Solvent less UV Crosslinkable Acrylic Pressure Sensitive Adhesives. Int. J. Adhes. Adhes. 2011, 31, 822-831.
  •  
  • 23. Li, P.; Zerroukhi, A.; Chen, J.; Chalamet, Y.; Jeanmaire, T.; Xia, Z. Synthesis of poly(ε-caprolactone)-block-poly(n-butyl acrylate) by Combining Ring-opening Polymerization and Atom Transfer Radical Polymerization with Ti[OCH2CCl3]4 as Difunctional Initiator: I. Kinetic Study of Ti[OCH2CCl3]4 Initiated Ring-opening Polymer. Polymer 2009, 50, 1109-1117.
  •  
  • 24. Fang, C.; Zhu, K.; Zhu, X. B.; Lin, Z. X. Preparation and Characterization of Self-crosslinking Fluorinated Polyacrylate Latexes and Their Pressure Sensitive Adhesive Applications. Int. J. Adhes. Adhes. 2019, 95, 102417.
  •  
  • 25. Cui, X. J.; Zhong, S. L.; Wang, H. Y. Emulsifier-free Core-shell Polyacrylate Latex Nanoparticles Containing Fluorine and Silicon in Shell. Polymer 2007, 48, 7241-7248.
  •  
  • 26. Lim, D.; Do, H. U.; Kim, H. J. PSA Performances and Viscoelastic Properties of SIS‐based PSA Blends with H-CPD Tackifiers. J. Appl. Polym. Sci. 2006, 102, 2839-2846.
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2021; 45(4): 592-600

    Published online Jul 25, 2021

  • 10.7317/pk.2021.45.4.592
  • Received on Mar 17, 2021
  • Revised on Apr 20, 2021
  • Accepted on Apr 22, 2021

Correspondence to

  • Zhean Xia

  • School of Material Science and Engineering, East China University of Science and Technology, Shanghai 200237, China

  • E-mail: xiazhean@ecust.edu.cn