Article
  • Study on the Effect of Chemical Reaction Between Component Polymers and Gelation on the Physical Properties of Aliphatic Polyketone/polyamide 6 Blends

  • Hong Goo Kwon, Taegu Hwang*, Dong Hak Kim*, and Younggon Son†

  • Advanced Materials Science and Engineering, College of Engineering, Kongju National University,
    Cheonan, Chungnam 31080, Korea
    *Dept. of Chemical Engineering, Soonchunhyang University, 22, Soonchunhyang-ro, Asan, Chungnam 31538, Korea

  • 지방족 폴리케톤/폴리아마이드 6 블렌드에서 성분 고분자 간 반응과 젤화가 블렌드의 물성에 미치는 영향

  • 권홍구 · 황태규* · 김동학* · 손영곤†

  • 공주대학교 신소재공학부, *순천향대학교 나노화학공학과

  • Reproduction, stored in a retrieval system, or transmitted in any form of any part of this publication is permitted only by written permission from the Polymer Society of Korea.

References
  • 1. Markarin, J. Unique Properties Drive the Polyketone Revival. Compounding World [Online], 2016, March, 15-22. http://www.compoundingworld.com (accessed August 10, 2021).
  •  
  • 2. Waddon, A. J.; Karttunen, N. R.; Lesser, A. J. On the Crystalline Structure and Morphology of Aliphatic Ketone Terpolymer. Macromolecules 1999, 32, 423-428.
  •  
  • 3. Lagaron, J. M.; Vickers, M. E.; Powell, A. K.; Bonner, J. G. On the Effect of the Nature of the Side Chain over the Crystalline Structure in Aliphatic Polyketones. Polymer 2002, 43, 1877.
  •  
  • 4. Sommazzi, A.; Garbassi, F. Olefin-carbon Monoxide Copolymers. Prog. Polym. Sci. 1997, 22, 1547-1605.
  •  
  • 5. Shkolnik, S.; Weil, E. D. Stabilization of Alternating Carbon Monoxide-ethylene Copolymer. J. Appl. Polym. Sci. 1998, 69, 1691-1704.
  •  
  • 6. Chiantore, O.; Lazzari, M.; Ciardelli, F.; Vito, S. D. Pyrolysis and Thermal Degradation of Ethylene-Carbon Monoxide Alternating Copolymers. Macromolecules 1997, 30, 2589-2597.
  •  
  • 7. Ash, C. E. Alternating Olefin/Carbon Monoxide Polymers: A New Family of Thermoplastics. Int. J. Polym. Mater. 1995, 30, 1-13.
  •  
  • 8. Lommerts, B. J. The Influence of Catalyst Remnants on Thermal Degradation During Melt Processing of High Melting Ethylene–carbon Monoxide Copolymers. Polymer 2001, 42, 6283-6287.
  •  
  • 9. Lee, H. C.; Son, Y.; Lee, S. Study of Compatibility between Aliphatic Polyketone Terpolymer and Poly(styrene-r-acrylonitrile). J. Appl. Polym. Sci. 2019, 137, 48743.
  •  
  • 10. 1Xu, F. Y.; Chien, J. C. W. New Miscible Polymer Blends of Propylene-Carbon Monoxide Alternating Copolymer with Poly(methyl methacrylate). Macromolecules 1994, 27, 6589-6593.
  •  
  • 11. 1de Vos, S. C.; Huhn, W.; Rieger, B.; Moller, M. Novel Blends of Alternating Propene-carbon Monoxide Copolymers and Styrenic Copolymers. Polym. Bull. 1999, 42, 611-618.
  •  
  • 12. Marklund, E.; Gedde, U. W.; Hedenqvist, M. S.; Wiberg, G. Properties of Polyketone/polypropylene Blends. Polymer 2001, 42, 3153-3160.
  •  
  • 13. Kim, Y.; Lee, C. S.; Kim, S.; Jung, H.; Jho, J. Y. Reactive Compatibilization of Polyketone/ethylene-octene Rubber Blends by Diaminodecane. Macrom. Res. 2015, 23, 965-970.
  •  
  • 14. Sémeril, D.; Passaglia, E.; Bianchini, C.; Davies, M.; Miller, H.; Ciardelli, F. Reactive Blending of Polyamides with Different Carbonyl Containing Olefin Polymers. Macromol. Mater. Eng. 2003, 288, 475-483.
  •  
  • 15. Asano, A.; Nishioka, M.; Takahashi, Y.; Kato, A.; Hikasa, S.; Iwabuki, H.; Nagata, K.; Sato, H.; Hasegawa, T.; Sawabe, H.; Arao, M.; Suda, T.; Isoda, A.; Mukai, M.; Ishikawa, D.; Izumi, T. High Impact Properties of Polyketone/Polyamide-6 Alloys Induced by Characteristic Morphology and Water Absorption. Macromolecules 2009, 42, 9506-9514.
  •  
  • 16. Kim, Y.; Bae, J. W.; Lee, C. S.; Kim, S.; Jung, H.; Jho, J. Y. Morphology and Mechanical Properties of Polyketone Blended with Polyamide and Ethylene-Octene Rubber. Macrom. Res. 2015, 23, 971-976.
  •  
  • 17. Lim, M. Y.; Kim, H. J.; Baek, S. J.; Kim, K. Y.; Lee, S. S.; Lee, J. C. Improved Strength and Toughness of Polyketone Composites using Extremely Small Amount of Polyamide 6 Grafted Graphene Oxides. Carbon 2014, 77, 366-378.
  •  
  • 18. Li, S.; Yang, Y.; Zha, X.; Zhou, Y.; Yang, W.; Yang, M. Nanoscale Morphology, Interfacial Hydrogen Bonding, Confined Crystallization and Greatly Improved Toughness of Polyamide 12/Polyketone Blends. Nanomaterials 2018, 8, 932.
  •  
  • 19. Zhou, Y. C.; Li, S. Y.; Yang, Y.; Bao, R. Y.; Liu, Z. Y.; Yang, M. B.; Yang, W. Morphologies, Interfacial Interaction and Mechanical Performance of Super-tough Nanostructured PK/PA6 Blends. Polym. Test. 2020, 91, 106777.
  •  
  • 20. Ma, Y.; Zhou, T.; Su, G.; Li, Y.; Zhang, A. Understanding the Crystallization Behavior of Polyamide 6/Polyamide 66 Alloys from the Perspective of Hydrogen Bonds: Projection Moving Window 2D Correlation FTIR Spectroscopy and the Enthalpy. RSC Adv. 2016, 6, 87405.
  •  
  • 21. Samples, E. M.; Schuck, J. M.; Joshi, P. B.; Willets, K. A.; Dobereiner, G. E. Synthesis and Properties of N-Arylpyrrole-Functionalized Poly(1-hexene-alt-CO). Macromolecules 2018, 51, 9323-9332.
  •  
  • 22. Cortes, P. G.; Araya-Hermosilla, R.; Araya-Hermosilla, E.; Acuña, D.; Mautner, A.; Caballero, L.; Melo, F.; Villoslada, I. M.; Picchioni, F.; Rolleri, A.; Quero, F. Mechanical Properties and Electrical Surface Charges of Microfibrillated Cellulose/imidazole-modified Polyketone Composite Membranes. Polym. Test. 2020, 89, 106710.
  •  
  • 23. Zhou, Y. C.; Zhou, L.; Feng, C. P.; Wu, X. T.; Bao, R. Y.; Liu, Z. Y.; Yang, M. B.; Yang, W. Direct Modification of Polyketone Resin for Anion Exchange Membrane of Alkaline Fuel Cells. J. Colloid Interface Sci. 2019, 556, 420-431.
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2021; 45(5): 748-756

    Published online Sep 25, 2021

  • 10.7317/pk.2021.45.5.748
  • Received on Apr 28, 2021
  • Revised on Jun 8, 2021
  • Accepted on Jun 30, 2021

Correspondence to

  • Younggon Son

  • Advanced Materials Science and Engineering, College of Engineering, Kongju National University,
    Cheonan, Chungnam 31080, Korea

  • E-mail: sonyg@kongju.ac.kr