Article
  • Wear Characterization of Reinforced Polyurethane Composites Producedvia Vacuum Casting

  • Sait Koçak and Yavuz Kaplan*,†

  • Mechatronics Engineering, Faculty of Technology, Pamukkale University, Denizli 20160, Turkey
    *Mechanical Engineering, Faculty of Technology, Pamukkale University, Denizli 20160, Turkey

  • 진공주조에 의해 생산된 강화 폴리우레탄 복합재의 마모특성

  • Reproduction, stored in a retrieval system, or transmitted in any form of any part of this publication is permitted only by written permission from the Polymer Society of Korea.

References
  • 1. Zmarzły, P.; Gogolewski, D.; Kozior, T. Design Guidelines for Plastic Casting Using 3D Printing. J. Eng. Fiber. and Fabr. 2020, 15, 1-10.
  •  
  • 2. Denoual, M.; Macé, Y.; Le Pioufle, B.; Mognol, P.; Castel, D.; Gidrol, X. Vacuum Casting to Manufacture a Plastic Biochip for Highly Parallel Cell Transfection. Meas. Sci. Technol. 2006, 17, 3134-3140.
  •  
  • 3. Chua, C. K.; Chew, T. H.; Eu, K. H. Integrating Rapid Prototyping and Tooling with Vacuum Casting for Connectors. Int. J. of Adv. Manuf. Technol. 1998, 14, 617-623.
  •  
  • 4. Wortmann, M.; Hoffmann, A.; Frese, N.; Heidi, A.; Brikmann, J.; Brandt, N.; Menzel, M.; Gölzhäuser, A.; Moritzer, E.; Hüsgen, B. Advanced Output of Silicone Molds in Vacuum Casting Processes by Polyamide 12 Powder Supplementation. Polym. Technol. Mater. 2019, 58, 1937-1943.
  •  
  • 5. Jiang, J.; Hu, G.; Li, X.; Xu, X.; Zheng, P.; Stringer, J. Analysis and Prediction of Printable Bridge Length in Fused Deposition Modelling Based on Back Propagation Neural Network. Virtual Phys. Prototyp. 2019, 14, 253-266.
  •  
  • 6. Wortmann, M.; Frese, N.; Keil, W.; Brikmann, J.; Biedinger, J.; Brockhagen, B.; Reiss, G.; Schmidt, C.; Gölzhäuser, A.; Moritzer, E.; Hüsgen, B. The Deterioration Mechanism of Silicone Molds in Polyurethane Vacuum Casting. ACS Appl. Polym. Mater. 2020, 2, 4719-4732.
  •  
  • 7. Budzik, G. Possibilities of Using Vacuum Casting Process for Manufacturing Cast Models of Turbocharger Impellers. J. Kones. 2007, 14, 125-130.
  •  
  • 8. Thian, S. C. H.; Fuh, J. Y. H.; Wong, Y. S.; Loh, H. T.; Gian, P. W.; Tang, Y. Fabrication of Microfluidic Channel Utilizing Silicone Rubber with Vacuum Casting. Microsyst. Technol. 2008, 14, 1125-1135.
  •  
  • 9. Liu, Y.; Kumar, S. Recent Progress in Fabrication, Structure, and Properties of Carbon Fibers. Polym. Rev. 2012, 52, 234-258.
  •  
  • 10. Karsli, N. G.; Aytac, A. Tensile and Thermomechanical Properties of Short Carbon Fiber Reinforced Polyamide 6 Composites. Compos. Part B: Eng. 2013, 51, 270-275.
  •  
  • 11. Elkazaz, E.; Crosby, W. A.; Ollick, A. M.; Elhadary, M. Effect of Fiber Volume Fraction on the Mechanical Properties of Randomly Oriented Glass Fiber Reinforced Polyurethane Elastomer with Crosshead Speeds. Alexandria Engin. J. 2020, 59, 209-216.
  •  
  • 12. Reis, J. M. L.; Chaves, F. L.; da Costa Mattos, H. S. Tensile Behaviour of Glass Fibre Reinforced Polyurethane at Different Strain Rates. Mater. Des. 2013, 49, 192-196.
  •  
  • 13. Zhang, H.; Li, W.; Yang, X.; Lu, L.; Wang, X.; Sun, X.; Zhang, Y. Development of Polyurethane Elastomer Composite Materials by Addition of Milled Fiberglass with Coupling Agent. Mater. Lett. 2007, 61, 1358-1362.
  •  
  • 14. Akram, N.; Saeed, M., Usman, M.; Mansha, A.; Anjum, F.; Mahmood Zia, K.; Mahmood, I.; Mumtaz, N.; Khan, W. G. Influence of Graphene Oxide Contents on Mechanical Behavior of Polyurethane Composites Fabricated with Different Diisocyanates. Polymers 2021, 13, 444-460.
  •  
  • 15. Yang, X.; Shuai, C. G.; Chen, L. G.; Yang, S. L. Study on Creep Property of Polyurethane Composites. Mater. Res. Innov. 2015, 5199-5201.
  •  
  • 16. Heck, C. A.; Giacomolli, D. A.; Livotto, P. R.; dos Santos, J. H. Z; Wolf, C. R. Hybrid Silica Generated In Situ in Polyurethane-based Composites. J. Appl. Polym. Sci. 2014, 131.
  •  
  • 17. Liu, L.; Zhou, Y.; Pan, S. Experimental and Analysis of the Mechanical Behaviors of Multi-walled Nanotubes/polyurethane Nanoweb-reinforced Epoxy Composites. J. Reinf. Plast. Comp. 2013, 32, 823-834.
  •  
  • 18. Tang, Y.; Tan, W. K.; Fuh, J. Y. H.; Loh, H. T.; Wong, Y. S.; Thian, S. C. H.; Lu, L. Micro-mould Fabrication for a Micro-gear via Vacuum Casting. J. Mater. Process. Technol. 2007, 192, 334-339.
  •  
  • 19. Kaplan, Y. Role of Reinforcement Materials on Mechanical and Tribological Properties of PTFE Composites. Polym. Korea 2020, 44, 436-444.
  •  
  • 20. Suresha, B.; Chandramohan, G.; Dayananda J. N.; Siddaramaiah. Effect of Short Glass Fiber Content on Three-body Abrasive Wear Behaviour of Polyurethane Composites. J. Compos. Mater. 2007, 41, 2701-2713.
  •  
  • 21. Yu, P.; Li, G.; Zhang, L.; Zhao, F.; Guo, Y.; Pei, X. Q.; Zhang, G. Role of SiC Submicron-particles On Tribofilm Growth at Water-lubricated Interface of Polyurethane/epoxy Interpenetrating Network (PU/EP IPN) Composites and Steel. Tribol. Int. 2021, 153.
  •  
  • 22. Fu, S. Y.; Feng, X. Q.; Lauke, B.; Mai, Y. W. Effects of Particle Size, Particle/matrix Interface Adhesion and Particle Loading on Mechanical Properties of Particulate-polymer Composites. Compos. Part B: Eng. 2008, 39, 933-961.
  •  
  • 23. Uhm, Y. R.; Kim, J.; Son, K. J.; Kim, C. S. Effect of Particle Size, Dispersion, and Particle-matrix Adhesion on W Reinforced Polymer Composites. Res. on Chem. Intermediat 2014, 40, 2145-2153.
  •  
  • 24. Shang, S. W.; Williams, J. W.; Söderholm, K. J. M. Work of Adhesion Influence on the Rheological Properties of Silica Filled Polymer Composites. J. Matter. Sci. 1995, 30, 4323-4334.
  •  
  • 25. Busse, M.; Schlarb, A. K. A Novel Neural Network Approach for Modeling Tribological Properties of Polyphenylene Sulfide Rein- forced on Different Scales. In Tribology of Polymeric Nano- composites; Friedrich, K.; Schlarb, A. K., Eds.; Butterworth-Heinemann: Germany, 2013; pp 779-793.
  •  
  • 26. Zhang, Z.; Yang, M.; Yuan, J.; Guo, F.; Men, X. Friction and Wear Behaviors of MoS2-multi-walled-carbonnanotube Hybrid Reinforced Polyurethane Composite Coating. Friction 2019, 7, 316–326.
  •  
  • 27. Jeevanantham, R.; Venketaramanamurthy, V. P.; Rajeswari, D. Mechanical and Wear Characterization of Basalt Fiber Reinforced Polyurethane Composites. Int. J. Adv. Eng. & Tech. 2016, 9, 79-83.
  •  
  • 28. He, T.; Wang, G.; Wang, Y.; Liu, Y.; Lai, W.; Wang, X. Feng, Y., Liu, X. Simultaneously Enhancing of Wear-resistant and Mechanical Properties of Polyurethane Composite Based on the Selective Interaction of Fluorinated Graphene Derivatives. Compos. Part B: Eng. 2019, 169, 200-208.
  •  
  • 29. Choi, E. Y.; Kim, S. W.; Lee, J. Y.; Ha, J. H.; Kim, C. K. Characteristics of Polyurethane Composites Containing Poly- urethane Grafted Multi-walled Carbon Nanotubes. Polym. Korea 2017, 41, 490-494.
  •  
  • 30. Kim, Y.; Yoon, H. J.; Lee, S. Y.; Lee, J. H.; Moon, S. B.; Nam, J. M.; Jung, K.; Wie, J. J. Analysis of Mechanical Properties in Thermoplastic Polyurethane-microcrystalline Cellulose Composites. Polym. Korea 2020, 44, 776-783.
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2021; 45(6): 824-831

    Published online Nov 25, 2021

  • 10.7317/pk.2021.45.6.824
  • Received on Mar 4, 2021
  • Revised on Aug 26, 2021
  • Accepted on Sep 11, 2021

Correspondence to

  • Yavuz Kaplan

  • Mechanical Engineering, Faculty of Technology, Pamukkale University, Denizli 20160, Turkey

  • E-mail: ykaplan@pau.edu.tr