Article
  • Accelerated Thermal Aging of Natural Fiber/Polypropylene Composites for Automotive Interior Parts

  • Pyoung-Chan Lee† , Chanhyeok Um, Sun Kyoung Jeoung, Youn Ki Ko, Jin Uk Ha, Ju-Yub Lee*, Jae Yong Lee**, Kwang Sup Kim**, and Dong Hyeok Kim***

  • Materials Technology R&D Division, Korea Automotive Technology Institute, Dongnam-gu, Cheonan-si, Chungnam 31214, Korea
    *Reliability R&D Division, Korea Automotive Technology Institute, Dongnam-gu, Cheonan-si, Chungnam 31214, Korea
    **R&D Center, Dukyang Ind. Co. Ltd., 105, Gwanggyo-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do 16229, Korea
    ***Technical Research Center, Jooeun Tech Co. Ltd., Buk-gu, Ulsan-si 44222, Korea

  • 자동차 내장부품용 천연섬유/폴리프로필렌 복합재료의 가속 열화에 관한 연구

  • 이평찬† · 엄찬혁 · 정선경 · 고윤기 · 하진욱 · 이주엽* · 이재용** · 김광섭** · 김동혁***

  • 한국자동차연구원 소재기술연구본부, *한국자동차연구원 신뢰성연구본부, **덕양산업㈜ 선행연구팀, ***주은테크㈜ 기술연구소

  • Reproduction, stored in a retrieval system, or transmitted in any form of any part of this publication is permitted only by written permission from the Polymer Society of Korea.

References
  • 1. Turku, I.; Kärki, T. Accelerated Weathering of Fire-retarded Wood-polypropylene Composites. Composites Part A 2016, 81, 305-312.
  •  
  • 2. Park, I.-K.; Hau, N. C.; Kim, Y. J.; Yun, J.-H.; Kim, S. H.; Suhr, J.; Lee, Y.-K.; Nam, J.-D. A Study of PP/Natural Fiber Composites Using Thermoplastic Lignin-polyester and Nanoclay. Polym. Korea 2016, 40, 744-750.
  •  
  • 3. Park, I.-K.; Sun, H.; Kim, S.-H.; Kim, Y.; Kim, G. E.; Lee, Y.; Kim, T.; Choi, H. R.; Suhr, J.; Nam, J.-D. Solvent-free Bulk Polymerization of Lignin-polycaprolactone (PCL) Copolymer and its Thermoplastic Characteristics. Sci. Rep. 2019, 9, 7033.
  •  
  • 4. Yeo, J.-S.; Lee, S.-W.; Hwang, S.-H. Mechanical Properties of Natural Material Reinforced Polypropylene Bio-Composites: The Effects of Chemical Modification of Lignin. Polym. Korea 2015, 39, 981-985.
  •  
  • 5. Pickett, J. E. Introduction to Polymer Weathering, Stabilization, and Testing. In Service Life Prediction of Polymers and Coatings; White, C. C., Nichols, M. E., Pickett, J. E., Eds.; William Andrew: Cambridge, 2020; pp 1-4.
  •  
  • 6. Lellinger, D.; Alig, I.; Oehler, H.; Rode, K.; Malz, F.; Herkenrath, L. M.; Youn, J. Y. Accelerated Thermal Aging of Thermoplastic Materials for the Motor Compartment: Characteriazation, Degradation Model and Lifetime Prediction. In Service Life Prediction of Polymers and Coatings; White, C. C., Nichols, M. E., Pickett, J. E., Eds.; William Andrew: Cambridge, 2020; pp 117-160.
  •  
  • 7. Celina, M.; Linde, E.; Brunson, D.; Quintana, A.; Giron, N. Overview of Accelerated Aging and Polymer Degradation Kinetics for Combined Radiation-thermal Environments. Polym. Degrad. Stab. 2019, 166, 353-378.
  •  
  • 8. Kong, E.; Yoon, B.; Nam, J.-D.; Suhr, J. Accelerated Aging and Lifetime Prediction of Graphene-Reinforced Natural Rubber Composites. Macromol. Res. 2018, 26, 998-1003.
  •  
  • 9. Lee, H. S.; Do, J. H.; Ahn, W.; Kim, C. A Study on Physical Properties and Life Time Prediction of ACM Rubber for Automotive Engine Gasket. Elast. Compos. 2012, 47, 254-258.
  •  
  • 10. Ahn, W.; Lee, H. S. Life Time Prediction Using Accelerated Ageing Test for a CR/CB Rubber Composite. Elast. Compos. 2017, 52, 237-241.
  •  
  • 11. Jung, W.-Y.; Weon, J.-I. Characterization of Thermal Degradaction for High Density Polyethylene: Mechanical and Thermal Behaviors and Long-Term Lifetime Prediction. Polym. Korea 2015, 39, 873-879.
  •  
  • 12. Choi, E. Y.; Shin, J.-C.; Lee, J. Y.; Kim, M. H.; Kim, C. K. Accelerated Life Testing of Thermoplastic Polyurethane Encapsulants Used in Underwater Acoustic Sensor. Macromol. Res. 2020, 28, 510-516.
  •  
  • 13. Seo, S. K. Minitab Reliability Analysis; ERETEC Inc.: Anyang, 2006.
  •  
  • 14. Jung, W.-Y.; Weon, J.-I. Characterization Thermal Degradation of Polyamide 66 Composite: Relationship between Lifetime Predication and Activation Energy. Polym. Korea 2012, 36, 712-720.
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2021; 45(6): 922-926

    Published online Nov 25, 2021

  • 10.7317/pk.2021.45.6.922
  • Received on Jul 21, 2021
  • Revised on Aug 1, 2021
  • Accepted on Aug 10, 2021

Correspondence to

  • Pyoung-Chan Lee

  • Materials Technology R&D Division, Korea Automotive Technology Institute, Dongnam-gu, Cheonan-si, Chungnam 31214, Korea

  • E-mail: pclee@katech.re.kr