Article
  • Relationship between Curing Characteristics and Rheological/Mechanical Properties of Soft-feel Coatings for Automotive Plastic Parts

  • Sung Ho Yoon#, Dong Geun Lee*,#, Na Hee Kim*, Kevin Injoe Jung*, Choon Soo Lee, Ji Won Lee, Gil Sun Lee**, and Hyun Wook Jung*,†

  • Materials Development Center, Hyundai Motor Company, Hwaseong 18280, Korea
    *Department of Chemical and Biological Engineering, Korea University, Seoul 02841, Korea
    **Department of General Education, Kookmin University, Seoul 02707, Korea

  • 자동차 플라스틱 도장용 소프트 질감 도료의 경화 특성 및 유변학적/기계적 물성의 상관관계에 관한 연구

  • 윤성호# · 이동근*,# · 김나희* · 정인조* · 이춘수 · 이지원 · 이길선** · 정현욱*,†

  • 현대자동차 재료개발센터, *고려대학교 화공생명공학과, **국민대학교 교양대학

References
  • 1. M. Nagamachi, Int. J. Ind. Ergonom., 15, 3 (1995).
  •  
  • 2. M. Nagamachi, Appl. Ergon., 33, 289 (2002).
  •  
  • 3. S. M. Noh, J. W. Lee, J. H. Nam, J. M. Park, and H. W. Jung, Prog. Org. Coat., 74, 192 (2012).
  •  
  • 4. S. M. Noh, J. H. Nam, J. K. Oh, and H. W. Jung, J. Coat. Technol. Res., 12, 85 (2015).
  •  
  • 5. H.-J. Streitberger and K.-F. Dossel, Automotive paints and coatings, John Wiley & Sons, Weinheim, 2008.
  •  
  • 6. M. Melchiors, M. Sonntag, C. Kobusch, and E. Jürgens, Prog. Org. Coat., 40, 99 (2000).
  •  
  • 7. OECE Industrie Chimiche Spa, EP 0562282 A1 (1993).
  •  
  • 8. A. Yahkind, D. Paquet, D. Parekh, C. Stine, and L. van der Ven, Prog. Org. Coat., 68, 28 (2010).
  •  
  • 9. X. Liu, M. Chan, B. Hennessey, T. Rübenach, and G. Alay, J. Phys. Conf. Ser., 13, 357 (2005).
  •  
  • 10. A. Mirabedini, M. Mohseni, and B. Ramezanzadeh, Prog. Org. Coat., 76, 1369 (2013).
  •  
  • 11. J. W. Hwang, K. N. Kim, S. M. Noh, and H. W. Jung, J. Coat. Technol. Res., 12, 177 (2015).
  •  
  • 12. S.-H. Lee, Y.-H. Park, S.-K. An, and J.-O. Lee, Polym. Korea, 25, 15 (2001).
  •  
  • 13. A. C. Fischer-Cripps, Nanoindentation, Springer-Verlag, New York, 2002.
  •  
  • 14. R. Martin, A. Rekondo, A. R. de Luzuriaga, G. Cabañero, H. J. Grande, and I. Odriozola, J. Mater. Chem. A, 2, 5710 (2014).
  •  
  • 15. ISO 14577-1: Metallic materials-Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015).
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2018; 42(2): 303-310

    Published online Mar 25, 2018

  • 10.7317/pk.2018.42.2.303
  • Received on Sep 6, 2017
  • Revised on Nov 10, 2017
  • Accepted on Nov 11, 2017

Correspondence to

  • Hyun Wook Jung

  • *Department of Chemical and Biological Engineering, Korea University, Seoul 02841, Korea

  • E-mail: hwjung@grtrkr.korea.ac.kr