Article
  • Improvement in Thermal and Oil Resistance of Ethylene Propylene Diene Monomer Rubber Compounds by Chloroprene Rubber and Nitrile-Butadiene Rubber
  • Young-Hoon Song and Hyung-Il Kim

  • Department of Chemical Engineering and Applied Chemistry, Chungnam National University, Daejeon 34134, Korea

  • Chloroprene Rubber 및 Nitrile-Butadiene Rubber에 의한 Ethylene Propylene Diene Monomer 고무 컴파운드의 내열 및 내유특성 향상
  • 송영훈 · 김형일

  • 충남대학교 공과대학 응용화학공학과

  • Reproduction, stored in a retrieval system, or transmitted in any form of any part of this publication is permitted only by written permission from the Polymer Society of Korea.

References
  • 1. Razak, J. A.; Ahmad, S. H.; Ratnam, C. T.; Mahamood, M. A.; Mohamad, N. Effects of Poly(Ethyleneimine) Adsorption on Graphene Nanoplatelets to the Properties of NR/EPDM Rubber Blend Nanocomposites. J. Mater. Sci. 2015, 50, 6365-6381.
  •  
  • 2. Manoj, K. C.; Kumari, P.; Unnikrishnan, G. Cure Characteristics, Swelling Behaviors, and Mechanical Properties of Carbon Black Filler Reinforced EPDM/NBR Blend System. J. Appl. Polym. Sci. 2010, 120, 2654-2662.
  •  
  • 3. Motaung, T. E.; Luyt, A. S.; Thomas, S. Morphology and Properties of NR/EPDM Rubber Blends Filled with Small Amounts of Titania Nanoparticles. Polym. Compos. 2011, 32, 1289-1296.
  •  
  • 4. Karaağaç, B.; Kaner, D.; Deniz, V. The Effects of Compatibility on the Mechanical Properties and Fatigue Resistance of Butyl/EPDM Rubber Blends. Polym. Compos. 2010, 31, 1869-1873.
  •  
  • 5. Botros, S. H.; Tawfic, M. L. Synthesis and Characteristics of MAH-g-EPDM Compatibilized EPDM/NBR Rubber Blends. J. Elast. Plast. 2006, 38, 349-365.
  •  
  • 6. Chang, Y. W.; Shin, Y. S. Effect of Trans-Octylene Rubber (TOR) on the Properties of NBR/EPDM Rubber Blends. Elast. Compos. 2000, 35, 149-156.
  •  
  • 7. Setua, D. K.; White, J. L. Flow Visualization of the Influence of Compatibilizing Agents on the Mixing of Elastomer Blends and the Effect of Phase Morphology. Polym. Eng. Sci. 1991, 31, 1742-1754.
  •  
  • 8. Setua, D. K.; White, J. L. Influence of Compatibilizing Agents on Rate of Mixing and Phase Morphology Development in Blends of Nitrile and Ethylene Propylene Rubber in an Internal Mixer: A Flow Vizualization Study. Kautsch. Gummi. Kunstst. 1991, 44, 542-549.
  •  
  • 9. Botros, S. H.; Tawfic, M. L. Preparation and Characteristics of EPDM/NBR Rubber Blends with BIIR as Compatibilizer. Polym. Plast. Technol. Eng. 2005, 44, 209-227.
  •  
  • 10. Manoj, K. C.; Kumari P.; Rajesh, C.; Unnikrishnan, G. Aromatic liquid transport through filled EPDM/NBR blends. J. Polym. Res. 2010, 17, 1-9.
  •  
  • 11. Go, J. H.; Ha, C. S. Rheology and Properties of EPDM/BR Blends with or Without a Homogenizing Agent or a Coupling Agent. J. Appl. Polym. Sci. 1996, 62, 509-521.
  •  
  • 12. Oh, S. Y.; Lee, Y. M. Current Status and Trend of Elastomers for Automobile. Polym. Sci. Technol. 1995, 6, 326-334.
  •  
  • 13. Morrissey, R. T. Sulfur-cure-compatible Blends of Halogenated Ethylene-propylene Copolymers and Diene Rubbers. Rubber Chem. Technol. 1976, 49, 353-366.
  •  
  • 14. Lee, S.; Bae, J. S. Effect of Processing Additives on Vulcanization and Properties of EPDM Rubber. J. Oil Appl. Sci. 2018, 35, 173-185.
  •  
  • 15. Jovanović, V.; Samaržija-Jovanović, S.; Budinski-Simendić, J.; Marković, G.; Marinović-Cincović, M. Composites Based on Carbon Black Reinforced NBR/EPDM Rubber Blends. Composites Part B 2013, 45, 333-340.
  •  
  • 16. Botros, S. H.; Tawfic, M. L. Compatibility and Thermal Stability of EPDM-NBR Elastomer Blends. J. Elast. Plast. 2005, 37, 299-317.
  •  
  • 17. Seo, E. H.; Kim, D. Y. Lee, D. W.; Seo, K. H. Effect of co-agent on Cure, Mechanical Properties of NBR Compounds in Peroxide System. Elast. Compos. 2017, 52, 187-193.
  •  
  • 18. Hwang, B. K.; Hong, K. H.; Park, H. Y.; Jeon, I. R., Seo, K. H. Thermal and Mechanical Properties of EPDM and CR Compounds with Various Fillers and its Contents for V-rib Belt. Elast. Compos. 2009, 44, 299-307.
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2022; 46(1): 94-100

    Published online Jan 25, 2022

  • 10.7317/pk.2022.46.1.94
  • Received on Sep 24, 2021
  • Revised on Nov 2, 2021
  • Accepted on Nov 2, 2021

Correspondence to

  • Hyung-Il Kim
  • Department of Chemical Engineering and Applied Chemistry, Chungnam National University, Daejeon 34134, Korea

  • E-mail: hikim@cnu.ac.kr