Article
  • Influence of Blend Ratio on Long-Term Thermal Aging and Oil Resistance in Fluorosilicone/Silicone Rubber
  • Hae Youn Park, Tae Hee Kim, Do Young Kim, Kwan Ho Seo, Dong Gug Kang*, Hye Young Kim*, and Dong Yun Lee

  • Department of Polymer Science and Engineering, Kyungpook National University, 80, Daehak-ro, Buk-gu, Daegu 41566, Korea
    *Research & Development Institue, Pyung-hwa Oil Seal Industry Co., LTD., 42, Nongongjungang-ro 51-gil, Nongong-eup, Dalseong-gun, Daegu 42982, Korea

  • 불소 실리콘/실리콘 고무의 장기 열 노화 및 내유성에 대한 블렌드 비율의 영향
  • 박해윤 · 김태희 · 김도영 · 서관호 · 강동국* · 김혜영* · 이동윤

  • 경북대학교 고분자공학과, *평화오일씰공업㈜ 기술연구소

  • Reproduction, stored in a retrieval system, or transmitted in any form of any part of this publication is permitted only by written permission from the Polymer Society of Korea.

References
  • 1. Zheng, X.; Pang, A. M.; Wang, Y.; Wang, W.; Bai, Y. Fabrication of UV-curable Fluorosilicone Coatings with Impressive Hydro- phobicity and Solvent Resistance. Prog. Org. Coat. 2020, 144, 105633-105640.
  •  
  • 2. Kim, J. K. Silicone Elastomer. Rubber Technol. 2018, 19, 94-102.
  •  
  • 3. Dull, G. Overview of Fluorosilicone. 2007 International Silicone Conference, Dearborn, Michigan, USA, 2007.
  •  
  • 4. Flitney, B. Extending the Application of Fluorosilicone Elastomers. Sealing Technol. 2005, 2, 6-16.
  •  
  • 5. Li, B.; Li, X.; Zhang, K.; Li, H.; Zhao, Y.; Ren, L.; Yuan, X. Synthesis of POSS-containing Fluorosilicone Block Copolymers via RAFT Polymerization for Application as Non-wetting Coating Materials. Prog. Org. Coat. 2015, 78, 188-199.
  •  
  • 6. Liu, Y.; Zhou, C.; Feng, S. Effects of γ-ray Radiation on the Properties of Fluorosilicone Rubber. Mater. Lett. 2012, 78, 110-112.
  •  
  • 7. Flitney, B. Extending the Application of Fluorosilicone Elastomers. Seal. Technol. 2005, 2, 6-11.
  •  
  • 8. Pierce, O. R.; Holbrook, G. W.; Johannson, O. K.; Saylor, J. C.; Brown, E. D. Fluorosilicone Rubber. J. Ind. Eng. Chem. 1960, 52, 783-784.
  •  
  • 9. Mascia, L.; Pak, S. H.; Caporiccio, G. Properties Enhancement of Fluorosilicone Elastomers with Compatibilised Crystalline Vinylidene Fluoride Polymers. Eur. Polym. J. 1995, 31, 459-465.
  •  
  • 10. Drobny, J. G. Technology of Fluoropolymers 2nd edition; CRC Press: Boca Raton, 2008.
  •  
  • 11. FSRs in Extreme Applications; Dow Chemical Company: Midland County, MI, USA, 2018; Balanced properties and reduced costs.
  •  
  • 12. DiPino, M. A. Advances in Fluorosilicone Compounds for Turbocharger Hose Liners and Other Transportation Applications. International Silicone Conference, Dearborn, MI, USA, April 4-5, 2006.
  •  
  • 13. Bhuvaneswari, C. M.; Dhanasekaran, R.; Chakravarthy, S. K. R.; Kale, S. S.; Gouda, G. Evaluation of Fluorosilicone-Silicone Elastomer Blend for Aeronautical Fuel System. Prog. Rubber Plast. Recycl. Technol. 2015, 31, 207-217.
  •  
  • 14. Kang, D.; Cho, K.; Yun, I.; Choi, W.; Hur, B. The Effect of Fillers on Rubber Characteristics for Gasket to Lithium Lon Battery. Polym. Korea 2010, 34, 430-433.
  •  
  • 15. Dick, J. S. Basic Rubber Testing: Selecting Methods for a Rubber Test Program; ASTM International: West Conshohocken, 2003.
  •  
  • 16. Gent, A. N. Engineering with Rubber: How to Design Rubber Component; Hanser: Munich, 2001.
  •  
  • 17. Ciesielski, A. An introduction to rubber technology; Smithers Rapra Technology: Shropshire, 1999.
  •  
  • 18. Silicone rubber-Performance Test Results; Shin-etsu Chemical Co., Ltd.: Japan, November 2021; General Properties.
  •  
  • 19. Phadke, A. A.; Chakraborty, S. K.; De, S. K. Cryoground Rubber-Natural Rubber Blends. Rubber Chem. Technol. 1984, 57, 19-33.
  •  
  • 20. Hussein, I. A.; Chaudhry, R. A.; Sharkh. B. F. A. Study of the Miscibility and Mechanical Properties of NBR/HNBR Blends. Polym. Eng. Sci. 2004, 44, 2346-2351.
  •  
  • 21. Ghosh, A.; Antony, P.; Bhattacharya, A. K.; Bhowmick, A. K.; De, S. K. Replacement of Virgin Rubbers by Waste Ground Vulcanizates in Blends of Silicone Rubber and Fluororubber based on Tetrafluoroethylene/Propylene/Vinyl-idene Fluoride Terpolymer. J. Appl. Polym. Sci. 2001, 82, 2326-2341.
  •  
  • 22. Ghosh, A.; Naskar, A. K.; Khastgir, D.; De, S. K. Dielectric Properties of Blends of Silicone Rubber and Tetraflouroethylene/Propylene/Vi-nylidene Fluoride Terpolymer. Polymer 2001, 42, 9849-9853.
  •  
  • 23. Liu, G; Hoch, M.; Liu, S.; Kulbaba, K.; Qiu, G. Quantitative Exploration of the Swelling Response for Carbon Black Filled Hydrogenated Nitrile Rubber with Three-Dimensional Solubility Parameters. Polym. Bull. 2015, 72, 1961-1974.
  •  
  • 24. Barton, A. F. M. Handbook of Solubility Parameters and Other Cohesion Parameters, 2nd edition; CRC Press: Boca Raton, 1991.
  •  
  • 25. Lynch, W. Handbook of Silicone Rubber Fabrication; Van Nostrand Reinheld: New York, 1978.
  •  
  • 26. Franssen, O.; Bosshammer, S. Flourinated Silicone Elastomers in Automotive Applications. Silicone Elastomers 2006, Frankfurt, Germany, September 19-20, 2006.
  •  
  • 27. Wang, Y. Z.; Bi, L. Y.; Zhang, H. J.; Zhu, X. T.; Liu, G. Y.; Qiu, G. X.; Liu, S. S. Predictive Power in Oil Resistance of Fluororubber and Fluorosilicone Rubbers Based on Three-Dimensional Solubility Parameter Theory. Polym. Test. 2019, 75, 380-386.
  •  
  • 28. Hanley, J.; Murphy, N.; Ali, H.; Jerrams, S. The Effect of Oil Swelling on the Fatigue Life of Elastomers subjected to Cyclic Bubble Inflation. 11th International Seminars on Elastomers, Freiburg, Germany, September 23-27, 2007.
  •  
  • 29. Shin, J. W. Study on Cold/Oil Atmosphere Resistance Property of Face Seal Rubber for Track Layer. Elastomers Compos. 2018, 3, 13-18.
  •  
  • 30. Guo, R.; Talma, A. G.; Datta, R. N.; Dierkes, W. K.; Noordermeer, J. W. M. Solubility Study of Curatives in Various Rubbers. Eur. Polym. J. 2008, 44, 3890-3893.
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2022; 46(1): 127-134

    Published online Jan 25, 2022

  • 10.7317/pk.2022.46.1.127
  • Received on Oct 19, 2021
  • Revised on Nov 6, 2021
  • Accepted on Nov 7, 2021

Correspondence to

  • Dong Yun Lee
  • Department of Polymer Science and Engineering, Kyungpook National University, 80, Daehak-ro, Buk-gu, Daegu 41566, Korea

  • E-mail: dongyunlee@knu.ac.kr