Article
  • Reinforcing Resins with Fumed Silica for DLP 3D Printing of Abrasion-resistant Parts

  • Hyeonwoo Hwangbo, Hyun Woo Kim*, **, Soon Hoon Kwon*, **,† , and Seog-Jin Jeon*,†

  • Department of Polymer Science and Engineering, Kumoh National Institute of Technology, Gumi, Gyeongbuk 39177, Korea
    *Department of Consulting, Kumoh National Institute of Technology, Gumi, Gyeongbuk 39177, Korea
    **TMC convergence consulting corporation, Daegu 42012, Korea

  • 내마모성 부품의 DLP 3D 프린팅을 위한 흄 실리카를 이용한 레진의 보강

  • 황보현우 · 김현우*, ** · 권순훈*, **,† · 전석진†

  • 금오공과대학교 고분자공학과, *금오공과대학교 컨설팅학과 **TMC 융합컨설팅법인

  • Reproduction, stored in a retrieval system, or transmitted in any form of any part of this publication is permitted only by written permission from the Polymer Society of Korea.

References
  • 1. Zhai, W.; Bai, L.; Zhou, R.; Fan, X.; Kang, G.; Liu, Y.; K. Zhou. Recent Progress on Wear-Resistant Materials: Designs, Properties, and Applications. Adv. Sci. 2021, 8, 2003739.
  •  
  • 2. Meng, J.; Zhang, P.; Wang, S. Recent Progress of Abrasion-resistant Materials: Learning from Nature. Chem. Soc. Rev. 2016, 45, 237-251.
  •  
  • 3. Myshkin, N. K.; Kovalev, A. V. Friction and Wear of Polymers and Polymer Composites; ASM International: Materials Park, 2017.
  •  
  • 4. Abdelbary, A. Wear of Polymers and Composites; Woodhead Publishing: Sawston, 2015.
  •  
  • 5. Ligon, S. C.; Liska, R.; Stampfl, J.; Gurr, M.; Mülhaupt, R. Polymers for 3D Printing and Customized Additive Manufacturing. Chem. Rev. 2017, 117, 10212-10290.
  •  
  • 6. Ngo, T. D.; Kashani, A.; Imbalzano, G.; Nguyen, K. T. Q.; Hui, D. Additive Manufacturing (3D Printing): A Review of Materials, Methods, Applications, and Challenges. Compos. B. Eng. 2018, 143, 172-196.
  •  
  • 7. Pal, A. K.; Mohanty, A. K.; Misra, M. Additive Manufacturing Technology of Polymeric Materials for Customized Products: Recent Developments and Future Prospective. RSC Adv. 2021, 11, 36398-36438.
  •  
  • 8. Maines, E. M.; Porwal, M. K.; Ellison, C. J.; Reineke, T. M. Sustainable Advances in SLA/DLP 3D Printing Materials and Processes. Green Chem. 2021, 23, 6863-6897.
  •  
  • 9. Akyalcin, S.; Rutkowski, P.; Arrigo, M.; Trotman, C. A.; Kasper, F. K. Evaluation of Current Additive Manufacturing Systems for Orthodontic 3-dimendional Printing. Am. J. Orthod. Dentofacial Orthop. 2021, 160, 594-602.
  •  
  • 10. Hwangbo, H.; Jeon, S.-J. Digital Light Processing 3D Printing of Multi-Materials with Improved Adhesion using Resins Containing Low Functional Acrylates. Korean J. Chem. Eng. 2022, 39, 451-459.
  •  
  • 11. Ge, Q.; Jian, B.; Li, H. Shaping Soft Materials via Digital Light Processing-based 3D Printing: A Review. Forces Mech. 2022, 6, 100074.
  •  
  • 12. Zhang, X. N.; Zheng, Q.; Wu, Z. L. Recent Advances in 3D Printing of Tough Hydrogels: A Review. Compos. B. Eng. 2022, 238, 109895.
  •  
  • 13. Herzberger, J.; Sirrine, J. M.; Williams, C. B.; Long, T. E. Polymer Design for 3D Printing Elastomers: Recent Advances in Structure, Properties, and Printing. Prog. Polym. Sci. 2019, 97, 101144.
  •  
  • 14. Thrasher, C. J.; Schwartz, J. J.; Boydston, A. J. Modular Elastomer Photoresins for Digital Light Processing Additive Manufacturing. ACS Appl. Mater. Interfaces 2017, 9, 39708-39716.
  •  
  • 15. Lin, C.-H.; Lin, Y.-M.; Lai, Y.-L.; Lee, S.-Y. Mechanical Properties, Accuracy, and Cytotoxicity of UV-polymerized 3D Printing Resins Composed of Bis-EMA, UDMA, and TEGDMA. J. Prosthet. Dent., 2020, 123, 349-354.
  •  
  • 16. Shah, D. M.; Morris, J.; Plaisted, T. A.; Amirkhizi, A. V.; Hansen, C. J. Highly Filled Resins for DLP-based Printing of Low Density, High Modulus Materials. Addit. Manuf. 2021, 37, 101736.
  •  
  • 17. Kebler, A.; Hickel, R.; Ilie, N. In vitro Investigation of the Influence of Printing Direction on the Flexural Strength, Flexural Modulus, and Fractographic Analysis of 3D-printed Temporary Materials. Dent. Mater. J. 2021, 40, 641-649.
  •  
  • 18. Marashinghe, L.; Croutxé-Barghorn, C.; Allonas, X.; Criqui, A. Effect of Reactive Monomers on Polymer Structure and Abrasion Resistance of UV Cured Thin Films. Prog. Org. Coat. 2018, 118, 22-29.
  •  
  • 19. Malaki, M.; Hashemzadeh, Y.; Tehrani, A. F. Abrasion Resistance of Acrylic Polyurethane Coatings Reinforced by Nano-Silica. Prog. Org. Coat. 2018, 125, 507-515.
  •  
  • 20. Palraj, S.; Selvaraj, M.; Maruthan, K.; Rajagopal, G. Corrosion and Wear Resistance Behavior of Nano-Silica Epoxy Composite Coatings. Prog. Org. Coat. 2015, 81, 132-139.
  •  
  • 21. Bahadur, S.; Gong, D.; Anderegg, J. W. Tribochemical Studies by XPS Analysis of Transfer Films of Nylon 11 and Its Composites Containing Copper Compounds. Wear 1993, 165, 205-212.
  •  
  • 22. Taormina, G.; Sciancalepore, C.; Messori, M.; Bondioli, F. 3D Printing Processes for Photocurable Polymeric Materials: Technologies, Materials, and Future Trends. J. Appl. Biometer. Funct. Mater. 2018, 16, 151-160.
  •  
  • 23. Howard, G. T. Biodegradation of Polyurethane: A Reivew. Int. Biodeterior. Biodegrad. 2022, 49, 245-252.
  •  
  • 24. Christenson, E. M.; Anderson, J. M.; Hiltner, A. Biodegradation Mechanisms of Polyurethane Elastomers. Corrosion Eng. Sci. Technol. 2007, 42, 312-323.
  •  
  • 25. Xue, W.; Huglin, M. B.; Jones, T. G. J. Swelling and Network Parameters of Crosslinked Thermoreversible Hydrogels of Poly(N-ethylacrylamide). Eur. Polym. J. 2005, 41, 239-248.
  •  
  • 26. Muratoglu, O. K.; Bragdon, C. R.; O’Connor, D. O.; Jasty, M.; Harris, W. H.; Gul, R.; McGarry, F. Unified Wear Model for Highly Crosslinked Ultra-High Molecular Weight Polyethylenes (UHMWPE). Biomaterials 1999, 20, 1463-1470.
  •  
  • 27. Nuñes, R.; Fonseca, J.; Pereira, M. Polymer-filler Interactions and Mechanical Properties of a Polyurethane Elastomer. Polym. Test. 2000, 19, 93-103.
  •  
  • 28. Green, D. G.; Nicholson, P. S.; Embury, J. D. Fracture of a Brittle Particulate Composite, Part 2: Theoretical Aspects. J. Mater. Sci. 1979, 14, 1657-1661.
  •  
  • 29. Imanaka, M.; Takeuchi, Y.; Nakamura, Y.; Nishimura, A.; Iida, T. Fracture Toughness of Spherical Silica-filled Epoxy Adhesives. Int. J. Adhes. Adhes. 2001, 21, 389-396.
  •  
  • 30. Yang, Z.-G.; Zhao, B.; Qin, S.-L.; Hu, Z.-F.; Jin, Z.-K.; Wang, J.-H. Study on the Mechanical Properties of Hybrid Reinforced Rigid Polyurethane Composite Foam. J. Appl. Polym. Sci. 2004, 92, 1493-1500.
  •  
  • 31. Rong, M. Z.; Zhang, M. Q.; Ruan, W. H. Surface Modification of Nanoscale Fillers for Improving Properties of Polymer Nanocomposites: A Review. Mater. Sci. Technol. 2006, 22, 787-796.
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2023; 47(3): 361-368

    Published online May 25, 2023

  • 10.7317/pk.2023.47.3.361
  • Received on Jan 18, 2023
  • Revised on Feb 1, 2023
  • Accepted on Feb 13, 2023

Correspondence to

  • Soon Hoon Kwon*, **, and Seog-Jin Jeon*

  • Department of Polymer Science and Engineering, Kumoh National Institute of Technology, Gumi, Gyeongbuk 39177, Korea
    *Department of Consulting, Kumoh National Institute of Technology, Gumi, Gyeongbuk 39177, Korea
    **TMC convergence consulting corporation, Daegu 42012, Korea

  • E-mail: sjjeon@kumoh.ac.kr, hanulksh@naver.com