Article
  • Study on Rubber Toughening of Aliphatic Polyketone via Polyether-block-polyamide

  • Shichoon Lee and Younggon Son*,†

  • Department of Aero-Materials Engineering, Jungwon University, 85 Munmu-ro, Goesan-eup, Goesan-gun, Chungbuk 28024, Korea
    *Advanced Materials Science and Engineering, College of Engineering, Kongju National University, 1223-24, Cheonan-daero, Seobuk-gu, Cheonan, Chungnam 31080, Korea

  • Polyether-block-polyamide를 이용한 지방족 폴리케톤의 고무 강인화에 관한 연구

  • 이시춘 · 손영곤*,†

  • 중원대학교 항공재료공학과, *공주대학교 신소재공학과

  • Reproduction, stored in a retrieval system, or transmitted in any form of any part of this publication is permitted only by written permission from the Polymer Society of Korea.

References
  • 1. Markarin, J. Unique Properties Drive the Polyketone Revival. Compounding World [Online], 2016, March, 15-22. http://www.compoundingworld.com (accessed May 15, 2024).
  •  
  • 2. Kim, Y.; Bae, J. W.; Lee, C. S.; Kim, S.; Jung, H.; Jho, J. Y. Morphology and Mechanical Properties of Polyketone Blended with Polyamide and Ethylene-Octene Rubber. Macrom. Res. 2015, 23, 971-976.
  •  
  • 3. Kim, Y.; Lee, C. S.; Kim, S.; Jung, H.; Jho, J. Y. Reactive Compatibilization of Polyketone/ethylene-octene Rubber Blends by Diaminodecane. Macrom. Res. 2015, 23, 965-970.
  •  
  • 4. Zuiderduin, W. C. J.; Vlasveld, D. P. N.; Huetink, H.; Gaymans, R. J. Mechanical Properties of Polyketone Terpolymer/rubber Blends. Polymer 2004, 45, 3765-3779.
  •  
  • 5. Lee, H. C.; Son, Y.; Lee, S. Study of Compatibility Between Aliphatic Polyketone Terpolymer and Poly(styrene-r-acrylonitrile). J. Appl. Polym. Sci. 2019, 137, 48743.
  •  
  • 6. Bae, J.; Kim, B. C. The Rheological Design of Aliphatic Polyketone Terpolymer Blends with Polyester Thermoplastic Elastomer. Macromol. Res. 2014, 22, 1165-1169.
  •  
  • 7. Kwon, H. G.; Hwang, T.; Kim, D. H.; Son, Y. Study on the Effect of Chemical Reaction Between Component Polymers and Gelation on the Physical Properties of Aliphatic Polyketone/polyamide 6 Blends. Polym. Korea 2021, 45, 748-756.
  •  
  • 8. Son, Y.; Lee, S. Correction to: Compatibility Between Aliphatic Polyketone Terpolymer and Nylon6 Polymer Blend. J. Polym. Res. 2023, 30, 33.
  •  
  • 9. Asano, A.; Nishioka, M.; Takahashi, Y.; Kato, A.; Hikasa, S.; Iwabuki, H.; Nagata, K.; Sato, H.; Hasegawa, T.; Sawabe, H.; Arao, M.; Suda, T.; Isoda, A.; Mukai, M.; Ishikawa, D.; Izumi, T. High Impact Properties of Polyketone/Polyamide-6 Alloys Induced by Characteristic Morphology and Water Absorption. Macromolecules 2009, 42, 9506-9514.
  •  
  • 10. Zhou, Y. C.; Li, S. Y.; Yang, Y.; Bao, R. Y.; Liu, Z. Y.; Yang, M. B.; Yang, W. Morphologies, Interfacial Interaction and Mechanical Performance of Super-tough Nanostructured PK/PA6 Blends. Polym. Test. 2020, 91, 106777.
  •  
  • 11. Yiwei Xia, Y.; Wang, G.; Feng, Y.; Hu, Y.; Zhao, G.; Jiang, W. Highly Toughened Poly(lactic acid) Blends Prepared by Reactive Blending with a Renewable Poly(ether-block-amide) Elastomer, J. Appl. Polym. Sci. 2021, 138, 50097.
  •  
  • 12. Zhang, K.; Nagarajan, V.; Misra, M.; Mohanty, A. K. Supertoughened Renewable PLA Reactive Multiphase BlendsSystem: Phase Morphology and Performance, ACS Appl. Mater. Interfaces 2014, 6, 12436-12448.
  •  
  • 13. Son, Y. Development of a Novel Microcompounder for Polymer Blends and Nanocomposite. J. Appl. Polym. Sci. 2009, 112, 609-619.
  •  
  • 14. Zuiderduin, W. C. J.; Homminga, D. S.; Huétink, H. J.; Gaymans, R. J. Influence of Molecular Weight on the Fracture Properties of Aliphatic Polyketone Terpolymers. Polymer 2003, 44, 6361-6370.
  •  
  • 15. Zuiderduin, W. C. J.; Homminga, D. S.; Huétink, H. J.; Gaymans, R. J. Influence of Copolymerisation on Fracture Behaviour of Aliphatic Polyketones. Polymer 2005, 46, 1921-1934.
  •  
  • 16. Liang, J. Z.; Li, R. K. Y. Rubber Toughening in Polypropylene: A Review. J. Appl. Polym. Sci. 2000, 77, 409-417.
  •  
  • 17. Kwon, H. G.; Park, J.; Kim, N.; Lee, S.; Shim, J.; Lee, M.; Son, Y. High Impact Strength of Aliphatic Polyketone/polyamide 6 Blends Induced by a Chemical Reaction. J. Elastomers Plast. 2023, 55, 492-510.
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2023 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2024; 48(6): 615-622

    Published online Nov 25, 2024

  • 10.7317/pk.2024.48.6.615
  • Received on May 21, 2024
  • Revised on Aug 11, 2024
  • Accepted on Aug 21, 2024

Correspondence to

  • Younggon Son

  • Advanced Materials Science and Engineering, College of Engineering, Kongju National University, 1223-24, Cheonan-daero, Seobuk-gu, Cheonan, Chungnam 31080, Korea

  • E-mail: sonyg@kongju.ac.kr