Article
  • Studies on Designed Latex and Emulsion Polymerizaton : 4 Synthesis and Paint Testing of Plastic Pigment
  • Park LS, Park SW, Chang JG, Bae JH
  • Designed Latex 및 유화중합에 관한 연구: 4. Plastic Pigment의 합성 및 Paint Test
  • 박이순, 박상욱, 장진규, 배재호
Abstract
Plastic pigments with void core/shell structure were synthesized and resulting latices were tested in the aqueous paint formulation. For the synthesis of plastic pigment a sequential emulsion polymerization method was used. Control of particle size, secondary nucleation and morphology for the void core/shell structure was investigated in a sequential step of seed, core, sheath, swelling and shell polymerization. The resulting plastic pigment latices were tested for whiteness and hiding in aqueous paint formulations for a partial substitution with titanium dioxide inorganic pigment.

Void core/shell 구조를 갖는 합성수지 안료 (plastic pigment)를 합성하고 이를 수성 라텍스 페인트에 배합하여 백색도, 은폐력 등을 실험하였다. 합성에 있어서는 seed, core, sheath, swelling 및 shell 중합의 다단계 유화중합법을 사용하였으며 각 단계별로 반응조건에 따른 입경조절, 2차적인 핵형성(secondary nucleation)의 최소화 및 단계별 polymer들의 compatibility와 팽윤 과정을 고려한 morphology의 조절방법 등에 대해 검토하였다. 생성된 중공(void core) 구조의 합성수지 안료는 수성 폐인트에 TiO2를 일부 대체하여 사용했을 때 백색도, 은폐력 등에 있어서 동등의 효과가 있음을 관찰하였다.

References
  • 1. Seiner JA, Ind. Eng. Chem. Prod. Res. Dev., 17(4), 302 (1978)
  •  
  • 2. Hislop RW, McGinley PL, J. Coat. Technol., 50(642), 69 (1978)
  •  
  • 3. Ramaiah et. al, Microvoids in Organic Coatings, Prog. in Org. Coatings, Vol. 11, p. 267-285 (1983)
  •  
  • 4. Kowalski AU.S. Patent, 4,427,836 (1984)
  •  
  • 5. Biale JU.S. Patent, 4,829,102 (1989)
  •  
  • 6. Poehlein GWEmulsion Polymerization, Ency. Polym. Sci. & Eng. Vol. 6, p. 1 (1986)
  •  
  • 7. Park LS, Lim YJ, Chang JG, Polym.(Korea), 13(8), 683 (1989)
  •  
  • 8. Chang JG, Park LS, Lim YJ, Polym.(Korea), 14(2), 138 (1990)
  •  
  • 9. Rolinson JFPigments for Coatings, Paint and Surface Coatings, R. Lambourne (Ed.), J. Wiley & Sons (1987)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2023 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 1992; 16(1): 8-14

    Published online Jan 25, 1992