Article
  • Performance Improvement of Unsaturated Polyester/Rock-Crush Composites of Organic Building Materials
  • Jang J, Kim S, Kim B
  • 유기 복합 건축재용 불포화 폴리에스테르/석분 복합재료의 물성향상
  • 장정식, 김세종, 김병철
Abstract
Rock-crush filled unsaturated polyester composites was reinforced with polyvinyl alcohol(PVA) short fiber, and their mechanical properties were evaluated. γ-Methacryloxypropyl trimethoxy silane(γ-MPS) was used for surface modification of reinforcement fiber and fillers. In the case of surface treated reinforcement, the mechanical properties of these composites were drastically increased compared to the untreated composites and showed maximum value at the optimum concentration of γ-MPS. Maximum flexural modulus of M700A/PVA composite showed at the γ-MPS concentration of 0.6wt%, M7004/rock-crush composite showed maximum flexural modulus value(1.26 GPa) at 0.8 wt% solution concentration of γ-MPS.

유기 복합 건축재에 적용하기 위하여 불포화 폴리에스테르/석분 복합재료에 기계적 물성과 접착성이 우수한 poly(vinyl alcohol) (PVA) 섬유를 도입하여 복합재료를 제조하여 기계적 물성을 평가하였다. 표면처리용 실란 카플링제로서 γ-methacryloxy propyl trimethoxy silane(γ-MPS)을 강화재 표면에 처리하여 실란 카플링제의 농도 변화에 따른 폴리비닐 알콜 섬유 강화 복합재료의 기계적 물성을 추적하였다. 강화재의 표면처리에 의한 복합재료의 기계적 물성은 현저히 증가하였으며, 적정 실란 처리농도에서 최대값이 나타났다. M700A/석분 복합재의 경우, 실란 처리 농도 0.8wt%에서 굴곡탄성율의 최대값이 나타났으며, 석분 함량 40wt% 일 때 굴곡탄성율 1.26 GPa로서 미처리시에 비해 28.5% 증가하였으며, M700A/PVA의 경우 폴리비닐 알콜 섬유 첨가량에 관계없이 실란 처리농도 0.6wt% 에서 굴곡탄성율의 최대값이 나타났다.

References
  • 1. Feldman DPolymeric Building Materials, Elsevier Appl. Sci., London (1989)
  •  
  • 2. Dudgeon CDProceeding of 34th International SAMPE Symposium, 2333 (1989)
  •  
  • 3. Updegraff IHHandbook of Composite, Ed. by G. Lubin, van Nostrand Reinhold, Inc, New York (1982)
  •  
  • 4. Thomas LLSPI Plastic Engineering Handbook, VanNostrand Reinhold, Inc., New York (1990)
  •  
  • 5. Ozawa T, Bull. Chem. Soc. Jpn., 38, 1881 (1965)
  •  
  • 6. Dudgeon CDProceedings of the 34th International SAMPE Symposium, pp. 2333-2345 (1989)
  •  
  • 7. Comstock LR, Smith PLU.S. Patent, 4,284,736 (1981)
  •  
  • 8. Smith PL. Comstock LRU.S. Patent, 3,549,586 (1970)
  •  
  • 9. Cucuras CNProceedings of the 43th Annual Conference, Composite Institute, The Society of the Plastics Industry, Inc., 13-B (1988)
  •  
  • 10. Refsnes SKASM Engineered Materials Reference Book, ASM International (1989)
  •  
  • 11. Ishda H, Koenig JL, J. Colloid Interface Sci., 64, 555 (1978)
  •  
  • 12. Wu SPolymer Interface and Adhesion, Ed. by Marcel Dekker, Inc., New York (1982)
  •  
  • 13. Plueddemann EPAdhesion Through Silane-Coupling Agents, 25th Annu. Tech., Conf., SPI, 13-D (1970)
  •  
  • 14. Plueddemann EP, Stark GAdhesion to Silane-Treaed Surfaces Through Interpenetrating Polymer Networks, 35th Annu. Tech. Conf. SPI, 20-B (1980)
  •  
  • 15. Inubushi S, Ikeda T, Tasuka S, J. Mater. Sci., 23, 535 (1988)
  •  
  • 16. Cotten GR, Boonstra BB, Rivin D, Williams FR, Kautsch. Gummi, 22, 477 (1969)
  •  
  • 17. Dekking HGG, J. Appl. Polym. Sci., 11, 23 (1967)
  •  
  • 18. Hashimoto K, Fujisawa T, Kobayashi M, Yosomiya R, J. Appl. Polym. Sci., 27, 4529 (1982)
  •  
  • 19. Plueddemann EP, Pape PGProc. 40th Ann. Conf., Reinforced Plastics/Composites Inst., 17-F (1985)
  •  
  • 20. Plueddemann EP, Clark HA, Nelson LE, Hoffmann KR, Mod. Plast., 39, 136 (1962)
  •  
  • 21. Pauling LThe Nature of the Chemical Bond, Cornell Univ. Press, Ithaca, N.Y. (1948)
  •  
  • 22. Plueddemann EP, Natl. SAMPE Tech. Cof., 453 (1969)
  •  
  • 23. Plueddemann EP, Mod. Plast., 47, 92 (1970)
  •  
  • 24. Plueddemann EP25th Ann. Conf. Reinforced Plast. Div., SPI, 13-D (1970)
  •  
  • 25. Jang J, Ishida H, Plueddemann EPProc. 41st Ann. Conf., Reinforced Plastics/Composites Inst., 21-F (1987)
  •  
  • 26. Jang J, Ishida H, Plueddemann EPProc. 41st Ann. Conf., Reinforced Plastics/Composites Inst., 2-C (1986)
  •  
  • 27. Ishida H, Miller JDSPI. 38th Ann. Conf., Reinf., Plast. Compos., 4-E (1983)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 1994; 18(4): 576-583

    Published online Jul 25, 1994