Article
  • Effect of Processing Conditions on Structure and Property of Aliphatic Polyester Blown Films
  • Jang SP, Lee SH, Cho HM, Lee KH
  • 지방족 폴리에스테르 Blown 필름의 구조와 물성에 대한 가공조건 영향
  • 장상필, 이상훈, 조형민, 이광희
Abstract
Blown film process is a major industrial process for the manufacture of aliphatic polyester films. Despite of its importance, relatively little has been reported on the processing characteristics and the structure development of aliphatic polyesters in blown film process. In this work, therefore, processing-structure-property relationship of aliphatic polyester blown films was evaluated. Mechanical properties of blown films prepared under various process conditions were measured. Film structure was analyzed by using FTIR with attenuated total reflection (ATR) mode. The biodegradation behavior of blown films was examined through soil burial test. Some information was also provided to establish a general understanding for the material design of biodegradable mulching films.

블로운 필름 공정온 지방족 폴리에스테르 필름을 제조하는데 있어 중요한 생산 공정이다. 이러한 중요성에도 불구하고 지방족 폴리에스테르 수지에 대한 블로운 필름 공정 특성이나 공정 조건에 따른 블로운 필름의 구조 변화에 대한 연구는 매우 미진한 형편이다. 본 연구에서는 여러 가지 공정 조건하에서 제조된 블로운 필름의 기계적 물성을 측정하고, IR-ATR dichroism 방법으로 구조를 분석하며, 토양매립시험을 통하여 생분해 속도를 조사함으로써 지방족 폴리에스테르 블로운 필름의 가공-구조-물성 (기계적 강도/생분해성) 상관관계를 평가하였다. 또한 지방족 폴리에스테르를 농업용 멀칭필름으로 사용할 수 있는지 검토하였다.

Keywords: aliphatic polyester; blown film; biodegradation; mulching film

References
  • 1. Tokiwa Y, Suzuki T, J. Appl. Polym. Sci., 26, 441 (1981)
  •  
  • 2. Tilstra L, Johnsonbaugh D, J. Environ. Polym. Degrad., 1, 257 (1993)
  •  
  • 3. Iwamoto A, Tokiwa Y, J. Appl. Polym. Sci., 52(9), 1357 (1994)
  •  
  • 4. Gassner F, Owen AJ, Polymer, 35(10), 2233 (1994)
  •  
  • 5. Bastioli C, Cerutti A, Guanella I, Romano GC, Tosin M, J. Environ. Polym. Degrad., 3, 81 (1995)
  •  
  • 6. Takiyama E, Fujimaki T, Plastics, 43, 87 (1992)
  •  
  • 7. Tokiwa Y, Polym. Prepr., 42, 3769 (1993)
  •  
  • 8. Benedict CB, Cook WJ, Jarrett P, Cameron JA, Huang SJ, Bell JP, J. Appl. Polym. Sci., 28, 327 (1983)
  •  
  • 9. Barham Pj, Keller A, Otun EL, Holmes PA, J. Mater. Sci., 19, 2781 (1984)
  •  
  • 10. Barham PJ, Keller A, J. Polym. Sci. B: Polym. Phys., 24, 69 (1986)
  •  
  • 11. Kunioka M, Tamaki A, Doi Y, Macromolecules, 22, 694 (1989)
  •  
  • 12. Doi Y, Kanesawa Y, Kunioka M, Macromolecules, 23, 26 (1990)
  •  
  • 13. Nishida H, Tokiwa Y, J. Environ. Polym. Degrad., 1, 65 (1993)
  •  
  • 14. Flournoy PA, Schaeffers WJ, Spectrochim. Acta, 22, 5 (1966)
  •  
  • 15. Pirnia A, Sung CSP, Macromolecules, 21, 699 (1988)
  •  
  • 16. Lee KH, Sung CSP, Macromolecules, 26, 3289 (1993)
  •  
  • 17. Jang SP, Lee KH, Kim MN, Polym. Adv. Technol.in press
  •  
  • 18. Dealy JM, Wissbrum KFMelt Rehology and Its Role in Plastics Processing, Van Nostrand Reinhold, New York (1990)
  •  
  • 19. Nielsen LE, Landel RFMEchanical Properties of Polymers and Composites, Marcel Dekker Inc., New York (1994)
  •  
  • 20. Socrates GInfrared Characteristic Group Frequencies, John Wiley and Sons, New York (1994)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 1996; 20(6): 1061-1070

    Published online Nov 25, 1996