Article
  • Properties of Blends of Polycarbonate and Polypropylene (I) : Crystallization Behavior
  • Chun YS, Lee HS, Oh TS, Kim WN
  • 폴리카보네이트와 폴리프로필렌 고분자 블렌드의 물성(I) : 결정화 거동
  • 전용성, 이헌상, 오택수, 김우년
Abstract
Blends of polycarbonate (PC) and polypropylene (PP) have been investigated by differential scanning calorimetry and polarized-light microscopy. From the measured melting temperature (Tm) of the PC-PP blends, it appears that the values of Tm of PP in the blends are shown to almost unchanged compare to that of the unblended PP. In the PC-PP blends, double crystallization peak are observed at about 80℃ and 100℃ when the PP becomes dispersed phase. This result indicates that the nucleation of PP in the PC-PP blends is divided into two parts : heterogeneous nucleation and homogeneous nucleation. For the blends of PC and PP with styrene-ethylene-butylene-styrene triblock copolymer ( SEBS ) , the SEBS acts as a heterogeneous nucleating agent, thus a single crystallization peak is observed at about 100℃. In the study of morphology of PC-rich composition, it was found that the spherulite size was decreased when the crystallization temperature was about 80℃ compare to the crystallization temperature was about 100℃. This result is consistent with the double crystallization behavior of PP. From the above results, it is suggested that the nucleation of PP in the PC-rich composition is divided into two parts with the type of the dispersion and the size of the dispersed phase. From the measured crystallization temperature of PP in the blends, the interfacial free energy between the heterogeneous nuclei and the PP of the blends was calculated and found to be 1680 (mN/m)3.

폴리카보네이트(PC)와 폴리프로필렌(PP) 블렌드의 열적 성질과 모폴로지를 시차 주사 열분석기 (DSC)와 편광 현미경을 이용하여 관찰하였다. DSC를 이용하여 측정된 블렌드의 용융 온도는 PC의 무게 분율에 따라 큰 차이가 없는 반면, PP가 분산상을 이루는 조성에서 80℃와 100℃의 온도에서 두 개의 결정화 피이크가 나타났다. 이는 블렌드에서 PP의 결정화가 100℃에서 불균일 핵 생성과 80℃에서 균일 핵 생성으로 분리되어 일어남을 의미하며, 상용화제로 스티렌-에틸렌-부틸렌-스티렌 블럭 공중합체 (SEBS)를 15phr 이상 첨가한 블렌드에 대해서는 SEBS가 불균일 기핵제로 작용하여 100℃에서 단일한 결정 피이크가 관찰되었다. 편광 현미경을 이용하여 PP가 분산상을 이루는 조성에서 블렌드의 모폴로지를 관찰한 결과, 80℃ 부근에서 생성된 PP의 구정 크기가 100℃ 부근에서 형성된 구정의 크기보다 작음을 알 수 있었다 이는 PP가 분산상을 이를 때 80℃와 100℃에서 두 개의 결정화 피이크가 나타나는 것과 일치하는 결과로, 블렌드에서 PP의 핵 생성이 분산상의 형태 및 크기에 따라 불균일 핵 생성과 균일 핵 생성으로 분리됨을 의미한다. DSC를 이용하여 측정된 블렌드의 결정화 온도로부터 PP와 불균일 기핵간의 계면 에너지가 1680 (mN/m)3의 값으로 계산되었다.

Keywords: polycarbonate; polypropylene; blend; double crystallization; morphology

References
  • 1. Paul DR, Newman SPolymer Blends, vol. 1, p. 4, Academic Press, New York (1978)
  •  
  • 2. Olabisi O, Robeson LM, Shaw MTPolymer-Polymer Miscibility, p. 349-351, Academic Press, New York (1979)
  •  
  • 3. Kim WN, Burns CM, Macromolecules, 20, 1876 (1987)
  •  
  • 4. Galeski A, Bartczak Z, Pracella M, Polymer, 25, 1323 (1984)
  •  
  • 5. Karger-Kocsis JPolypropylene, vol. 2, p. 25-37, Chapman & Hall, London (1995)
  •  
  • 6. Wenig W, Karasz FE, MacKnight WJ, J. Appl. Phys., 46, 4194 (1975)
  •  
  • 7. Hu SR, Kyu T, Stein RS, J. Polym. Sci. B: Polym. Phys., 25, 71 (1987)
  •  
  • 8. Stein RS, Khambatta FB, Warren FP, J. Polym. Sci. Polym. Symp., 63, 313 (1978)
  •  
  • 9. Khambatta FB, Warner F, Russel T, Stein RS, J. Polym. Sci. B: Polym. Phys., 14, 1391 (1976)
  •  
  • 10. Martuscelli E, Polym. Eng. Sci., 24, 563 (1984)
  •  
  • 11. Alfonso GC, Russell TP, Macromolecules, 19, 1143 (1986)
  •  
  • 12. Calahorra E, Cortazar M, Guzman GM, Polymer, 23, 1322 (1982)
  •  
  • 13. Paul DR, Barlow JW, Bernstein RE, Wahrmund DC, Polym. Eng. Sci., 18, 1225 (1978)
  •  
  • 14. Bartczak Z, Caleski A, Martuscelli E, Janik H, Polymer, 26, 1843 (1985)
  •  
  • 15. Karger-Kocsis J, Kallo A, Szafner A, Bordor G, Senyei Z, Polymer, 20, 37 (1979)
  •  
  • 16. Martuscelli E, Silvestre C, Bianchi L, Polymer, 24, 1458 (1983)
  •  
  • 17. Jang BZ, Uhlmann DR, vanderSande JB, J. Appl. Polym. Sci., 29, 4377 (1984)
  •  
  • 18. Bartczak Z, Galeski A, Pacella M, Polymer, 27, 537 (1986)
  •  
  • 19. Ghijsels A, Groesbeek N, Yip CW, Polymer, 23, 1913 (1982)
  •  
  • 20. Robitaille C, Prud'homme J, Macromolecules, 16, 665 (1983)
  •  
  • 21. Bartczak Z, Galeski A, Krasnikiva NP, Polymer, 28, 1627 (1987)
  •  
  • 22. Aref-Azar A, Hay JN, Marsden BJ, Walker N, J. Polym. Sci. B: Polym. Phys., 18, 637 (1980)
  •  
  • 23. Klemmer N, Jungnickel BJ, Colloid Polym. Sci., 262, 381 (1984)
  •  
  • 24. Frensch H, Jungnickel BJ, Colloid Polym. Sci., 267, 16 (1989)
  •  
  • 25. O'Malley JJ, Crystal RG, Erhardt PFBlock Copolymers, Plenum Press, New York (1970)
  •  
  • 26. Koutsky JA, Walton AG, Baer E, J. Appl. Phys., 38, 1832 (1967)
  •  
  • 27. Cormia PL. Price FP, J. Chem. Phys., 37, 1333 (1962)
  •  
  • 28. Burns JR, Turnbull D, J. Appl. Phys., 37, 4021 (1966)
  •  
  • 29. Wunderlich BMacromolecular Physics, vol. 2, p. 36-39, Academic Press, New York (1976)
  •  
  • 30. Barham PJ, Jarvis DA, Keller A, J. Polym. Sci. B: Polym. Phys., 20, 1733 (1982)
  •  
  • 31. Gupta AK, Srinivasan KR, J. Appl. Polym. Sci., 47, 167 (1993)
  •  
  • 32. Lovinger AJ, Davis DD, Padder RJ, Polymer, 26, 1595 (1985)
  •  
  • 33. Hoffman JD, SPE Trans., 4, 315 (1964)
  •  
  • 34. Gornick F, Hoffman JD, Ind. Eng. Chem., 58, 41 (1966)
  •  
  • 35. Krigbaum WR, Uematsu I, J. Polym. Sci. A: Polym. Chem., 3, 767 (1965)
  •  
  • 36. Kirshenbaum J, J. Polym. Sci. A: Polym. Chem., 3, 1869 (1965)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 1996; 20(6): 1071-1079

    Published online Nov 25, 1996