Article
  • Temperature Effect on Electro-Optic Responses of a PDLC Film with and without Pre-Aligned LC Droplets
  • Ahn WS, Ha KR
  • 전기장하에서 액정이 배열된 구조를 가진 PDLC 필름의 온도에 따른 전기광학적 특성에 관한 연구
  • 안원술, 하기룡
Abstract
Temperature effects on the electro-optic properties for the PDLC films of PMMA/E7 blend prepared with and without pre-aligned LC droplets within the blends were investigated. The observations of the electro-optic response times with temperature fort the films led to a result that there is an effective interfacial region between the polymer matrix and bulk LC-rich droplets, having a thickness with LC concentration gradient i.e., from lower LC concentration of matrix-side to the higher one of LC droplet-side. It was also considered that the thickness of this interfacial region could be changed depending on temperature. In the effective interfacial region, moreover, the polymer chains of matrix-side can affect the LC relaxation motions of droplet-side, by relaxing their own stresses exerted by electric field on cooling the PDLC film with AC field, exhibiting two different relaxation processes of title film at a fixed temperature, i.e., the fast relaxation and the slow one.

용융 상태의 PMMA/E7 블랜드를 이용하여 전기장이 인가된 상태에서 상분리됨으로서 미리 배열된 액정 방울 구조를 가진 PDLC 필름과 그렇지 않은 것의 전기광학 특성을 온도의 변화에 따라 조사하였다. 필름의 동작 온도에 따른 응답 시간에 관한 연구로부터 상분리되어 있는 블랜드내의 고분자 벽면과 액정 방울 간에는 어느 정도의 두께를 가진 유효 계면이 존재하고 또한 이 계면 내에서는 액정의 농도 경사가 있음이 도출되었으며 또한 이 계면의 두께는 온도에 따라 달라지는 것으로 생각되었다. 한편 이 유효 계면 내의 고분자들은 냉각시에 전기장에 의해 받은 응력 때문에 계면에서의 액정 온도에 영향을 미치는 것으로 생각되었으며 이러한 결과로서 전기장이 인가된 상태에서 만들어진 PDLC 필름은 인가된 전기장이 없어지면 곧 바로 일어나는 응력 해소 과정으로서 시간에 따라 필름의 투명도 변화를 나타내고 또한 이 과정은 처음의 fast relaxation에 계속된 slow relaxation의 두 가지의 연속된 서로 다른 메카니즘에 의해 진행되는 것으로 관찰되었다.

Keywords: polymer/LC; PDLC; electro-optics; effctive interface; relaxation

References
  • 1. Doane JWLiquid Crystals-Applications and Uses, edited by B. Bahadur, World Scientific Publishing, 1, 361 (1990)
  •  
  • 2. Fergason JL, SID Int. Symp. Dig. Tech., 16, 68 (1985)
  •  
  • 3. Doane JW, Vaz NA, Wu BG, ZumerS, Appl. Phys. Lett., 48, 269 (1986)
  •  
  • 4. Wu BG, West JL, Doane JW, J. Appl. Phys., 62, 3925 (1987)
  •  
  • 5. Doane JW, Golemme A, West JL, Whitehead JB, Wu BG, Mol. Cryst. Liq. Cryst., 165, 511 (1988)
  •  
  • 6. Montgomery GP, West JL, Tamura-Lis W, J. Appl. Phys., 69, 1605 (1991)
  •  
  • 7. West JLLiquid Crystalline Polymers, ACS Symp. Series, edited By R.A. Weiss and C.K. Ober, American Chemical Society, Washington, D.C., p. 475 (1990)
  •  
  • 8. Kitzerow HS, Liq. Cryst., 16, 1 (1994)
  •  
  • 9. West JL, Kelly JR, Jewell K, Ji Y, Appl. Phys. Lett., 60, 3238 (1992)
  •  
  • 10. Ji Y, Kelly JR, West JL, Liq. Cryst., 14, 1885 (1993)
  •  
  • 11. Ji Y, Kelly JRSID 95 Dig., 271 (1995)
  •  
  • 12. Kim YC, Lee SH, West JL, Gelerinter E, J. Appl. Phys., 69, 1605 (1995)
  •  
  • 13. Margerum JD, Lackner AM, Lamos F, Lim KC, Smith WH, Liq. Cryst., 5, 1477 (1989)
  •  
  • 14. West JL, Mol. Cryst. Liq. Cryst. Inc. Nonlin. Opt., 157, 427 (1988)
  •  
  • 15. Inoue T, Cicerone MT, Ediger MD, Macromolecules, 28(9), 3425 (1995)
  •  
  • 16. Ahn W, Kim CY, Kim H, Kim SC, Macromolecules, 25, 5002 (1992)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 1997; 21(1): 154-160

    Published online Jan 25, 1997