Article
  • Preparation of Microcellular SAN Foam Using Supercritical CO2
  • Lee KN, Suh YJ, Lee HJ, Kim JH
  • 초임계 이산화탄소를 이용한 미세 구조 SAN Foam 제조
  • 이경남, 서용준, 이해준, 김중현
Abstract
Microcellular polymeric foam structures have been generated using a pressure induced phase separation in concentrated mixtures of supercritical CO2 and SAN. The process tyically generates microcellular core structure encased by nonporous skin. Pore growth will occur through two me mechanisms: diffusion of CO2 from polymer-rich regions into the pores and also through CO2 gas expansion. The effects of saturation pressure, temperature, and swelling time on the cell size, cell density, and bulk density of the porous materials have been studied. Higher CO2 pressure lowered polymer viscosity and interfacial tension between SAN and CO2 to produce cells with smaller average size but higher cell density, resulted from increase inswollen CO2 into SAN matrix. This trend was similar to what was observed in swelling time series. While the average cell size increased with increasing temperature, the cell density decreased. The trend of bulk density was similar to that of cell size.

본 연구에서는 초임계 CO2 SAN의 혼합물에서 압력 유도 상분리를 이용하여 미세 구조 고분자 foam을 만들었다. 이 때, 만들어진 foam은 비공성 표면과 마이크로 셀 구조를 갖게 되었다. 마이크로 셀은 외부에서 확산 침투된 CO2의 확산 및 셀 안에서 CO2의 팽창에 의해서 성장하였다. 또한 다공성 물질의 셀 크기. 셀 밀도. 벌크 밀도에 대한 포화 압력, 팽윤시간. 온도의 영향에 대해서 연구하였다. 포화 jdkqfur이 증가할수록 평균 셀 크기는 줄어들고, 셀 밀도는 증가하였다. 포화 시간에 대한 결과도 포화 압력과 비슷한 경향을 나타내었다. 반면, 온도가 증가할수록 셀 크기는 증가하고 셀 밀도는 감소하였다. 벌크 밀도에 대한 압력, 팽윤시간, 온도에 대한 경향은 셀 크기의 결과와 유사한 경향을 나타내었다.

Keywords: microcellular polymeric foam; supercritical CO2; pressure induced phase separation; cell size; density; bulk density

References
  • 1. Martini-Vvedensky JE, Suh NP, Waldman FAU.S. Patent, 4,473,665 (1984)
  •  
  • 2. Kumar V, Suh NP, Polym. Eng. Sci., 30, 1323 (1990)
  •  
  • 3. Aubert JH, Sylwester AP, Chemtech, April, 234 (1991)
  •  
  • 4. Aubert JH, Sylwester AP, Chemtech, May, 290 (1991)
  •  
  • 5. Shutov FA, Adv. Polym. Sci., 51, 157 (1983)
  •  
  • 6. Goel SK, Beckman EJ, Polym. Eng. Sci., 34(14), 1137 (1994)
  •  
  • 7. Goel SK, Beckman EJ, Polym. Eng. Sci., 34(14), 1148 (1994)
  •  
  • 8. Watkins JJ, Mccarthy TJ, Macromolecules, 27(17), 4845 (1994)
  •  
  • 9. Liau IS, McHugh MASupercritical Fluid Technology, p. 415, Elsevier Science Publishers B.V., Amsterdam (1985)
  •  
  • 10. Lee KN, Kim JH, Chem. Ind. Technol., 16(4), 352 (1998)
  •  
  • 11. Koo JG, Polym. Sci. Technol., 3(5), 369 (1992)
  •  
  • 12. Parks KL, Beckman EJ, Polym. Eng. Sci., 36(19), 2417 (1996)
  •  
  • 13. Vieth WRDiffusion In and Through Polymers: Principles and Applications, p. 98, Hanser Publishers, New York (1991)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 1999; 23(2): 181-188

    Published online Mar 25, 1999