Article
  • Thermal and UV Curing of Vacuum Deposited Film of Acetylene Substituted Fluorenes
  • Jung SH, Kim JS, Kang Y, Lee C
  • 아세틸렌기가 치환된 플루오렌 증착박막의 열 및 자외선 경화
  • 정상현, 김정수, 강영구, 이창진
Abstract
Acetylene substituted fluorenes such as 2-ethynylfluorene and 2,7-diethynylfluorene were synthesized and thin films were prepared by the vacuum deposition. Curing of these fluorene derivatives could be achieved by heat treatment and UV irradiation. The curing temperature of 2-ethynylfluorene and 2,7-diethynylfluorene were found to be 231 and 198 degreesC, respectively. The cured poly(2-ethynylfluorene) and poly(2,7-diethynylfluorene) started to decompose at 280 and 385 degreesC, respectively. Fluorescent characteristics of the cured films were similar to those of monomers, but fluorescent efficiency of the film was decreased about 3 to 10 fold.

아세틸렌기가 치환된 fluorene 유도체 2-ethynylfluorene을 합성하였고 이를 진공 증착하여 박막을 제조하였다. 삼중결합이 치환된 fluorene 유도체들은 자외선 및 열에 의해 경화가 가능하였다. DSC 측정 결과 2-ethynylfluorene은 231 ℃에서 그리고 2,7-diethynylfluorene은 198 ℃에서 경화가 일어나는 것이 관측되었다. 경화된 poly(2-ethynylfluorene) 및 poly(2,7-diethynylfluorene)의 분해는 280 및 385 ℃에서 일어나기 시작하며 T(g)는 관측되지 않았다. 경화된 박막의 광발광 특성은 단량체와 매우 유사하나, 발광 효율은 3에서 10 배정도 감소하였다.

Keywords: Vacuum Deposition Polymerization; Acetylene; Fluorene; UV Curing

References
  • 1. Lee JG, Kim S, Choi DK, Kim Y, Kim SC, Lee MH, Jeong K, J. Korea Phys. Soc., 35(S), 604 (1999)
  •  
  • 2. Fukuda E, Key Eng. Materials, 92-93, 143 (1994)
  •  
  • 3. Takahashi Y, Ukishima S, Iijima M, Fukuda E, J. Appl. Phys., 70, 6983 (1991)
  •  
  • 4. Iwatsuki S, Kubo M, Hori Y, Macromolecules, 26, 1407 (1993)
  •  
  • 5. Greiner A, Trends Polym. Sci., 5, 12 (1997)
  •  
  • 6. Gorham WF, J. Polym. Sci. A: Polym. Chem., 4, 3207 (1966)
  •  
  • 7. Rogojevic S, Moore JA, Gill WN, J. Vac. Sci. Technol. A, 17, 266 (1999)
  •  
  • 8. Maruo YY, Andoh Y, Sasaki S, J. Vac. Sci. Technol. A, 11, 2590 (1993)
  •  
  • 9. Takahashi Y, Ukishima S, Iijima M, Fukuda E, Jpn. J. Appl. Phys., 28(L), 2245 (1989)
  •  
  • 10. Macchi EM, J. Polym. Sci. A: Polym. Chem., 10, 45 (1972)
  •  
  • 11. Ikeda RM, Angero RJ, Boettcher FP, Blomberg RN, J. Appl. Polym. Sci., 25, 1391 (1980)
  •  
  • 12. Barentsen HM, van Dijk M, Kimkes P, Zuilhof H, Sudholter EJR, Macromolecules, 32(6), 1753 (1999)
  •  
  • 13. Ree M, Shin TJ, Kim SI, Woo SH, Yoon DY, Polymer, 39(12), 2521 (1998)
  •  
  • 14. Percec V, Auman BC, Makromol. Chem., 185, 1867 (1984)
  •  
  • 15. Meyer GW, Glass TE, Grubbs HJ, Mcgrath JE, J. Polym. Sci. A: Polym. Chem., 33(13), 2141 (1995)
  •  
  • 16. Smith DW, Babb DA, Snelgrove RV, Townsend PH, Martin SJ, J. Am. Chem. Soc., 120(35), 9078 (1998)
  •  
  • 17. Lee HJ, Kim DS, Suh MC, Shim SC, J. Polym. Sci. A: Polym. Chem., 34(16), 3255 (1996)
  •  
  • 18. Barnett MD, Daub GH, Hayes FN, Ott DG, J. Am. Chem. Soc., 81, 4583 (1959)
  •  
  • 19. Ranger M, Rondeau D, Leclerc M, Macromolecules, 30(25), 7686 (1997)
  •  
  • 20. Crisp GT, Jiang YL, Synth. Commun., 28, 2571 (1998)
  •  
  • 21. Lewis J, Raithby PR, Wong WY, J. Organomet. Chem., 556, 219 (1998)
  •  
  • 22. Takahashi S, Kuroyama Y, Sonogashira K, Hagihara N, Synthesis, 627 (1980)
  •  
  • 23. Beggin C, Grazulevicius JV, Strohriegl P, Macromol. Chem. Phys., 195, 2353 (1994)
  •  
  • 24. Chang JY, Ji HJ, Han MJ, Bull. Korean Chem. Soc., 16, 675 (1995)
  •  
  • 25. Kim HJ, Brunovska Z, Ishida H, Polymer, 40(7), 1815 (1999)
  •  
  • 26. Cataldo F, J. Photochem. Photobiol. A-Chem., 99, 75 (1996)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2001; 25(3): 327-333

    Published online May 25, 2001

  • Received on Jan 30, 2001