Article
  • Preparation and Properties of Quasi-Carbon Fibers from Stabilized PAN Fibers
  • Cho D, Choi Y, Park JK
  • 안정화 PAN 섬유로부터 준탄소섬유의 제조 및 물성
  • 조동환, 최유송, 박종규
Abstract
Stabilized polyacrylonitrile (PAN) fibers can be transformed into quasi-carbon fibers with different properties depending on heat-treatment processing parameters at lower temperatures than temperature for the fabrication of carbon fibers. It has been investigated from the preliminary work that appropriate quasi-carbonization processes at about 1100℃ strongly influence various properties of quasi-carbon fiber/polymer composite as well as quasi-carbon fiber itself. The objective of the present work is to prepare quasi-carbon fibers from stabilized PAN fibers using various quasi-carbonization cycles and to examine their properties. Two temperature regions, up to 800℃ and above 1000℃, were used for quasi-carbonization processes. The chemical composition, physical properties, thermal stability, microstructure, mechanical properties and electrical resistivity of the quasi-carbon fibers prepared with different final heat-treatment temperatures, heating rates, holding times, heating steps, and purging gas purity were extensively examined. The results were also compared with those from stabilized PAN fiber and commercial PAN-based carbon fiber. The present study showed that a variety of properties of quasi-carbon fibers significantly depended on several quasi-carbonization process parameters.

안정화 폴리아크릴로니트릴(PAN) 섬유는 탄소섬유 제조에서 요구되는 온도보다 낮은 조건에서 여러 가지 열처리공정 인자에 따라 다른 물성을 갖는 준탄소섬유로 변환될 수 있다. 최근의 초기연구 결과에 의하면 약 1100℃ 부근에서 적절한 준탄화공정은 준탄소섬유의 물성과 준탄소섬유/고분자 복합재료의 물성에 매우 중요하게 작용하는 것으로 조사되었다. 따라서, 본 연구의 목적은 안정화 PAN 섬유를 이용하여 여러 준탄화공정을 통해 준탄소섬유를 제조하고 그 물성을 조사하는 것이다. 준탄소공정은 800℃까지의 저온영역과 1000℃이상의 고온영역으로 나누어 행하였으며, 최종 준탄화온도, 승온속도, 체류시간, 승온단계, 분위기가스 등을 변화시켜가며 얻어진 준탄소섬유에 대한 화학조성, 물리적 특성, 열안정성, 미세구조, 기계적 특성 및 전기저항성을 조사하였다. 각 조건에서 얻어진 준탄소섬유에 대한 결과는 열처리전 안정화 PAN 섬유와 상업용 PAN계 탄소섬유의 물성과 비교 분석하였다. 본 연구의 결과는 조사된 물성이 주어진 여러 가지 준탄화공정 인자에 크게 의존하였음을 보여주었다.

Keywords: stabilized PAN fiber; quasi-carbon fiber; quasi-carbonization; thermal stability; microstructure; tensile properties; electrical resistivity

References
  • 1. Donnet JB, Wang TK, Peng JCM, Rebouillat SCarbon Fibers, 3rd Ed., chapter 1, Marcel Dekker, Inc., New York (1998)
  •  
  • 2. Bahl OP, Manocha LM, Carbon, 12, 417 (1974)
  •  
  • 3. Markovic V, Marsh H, Carbon, 19, 9 (1981)
  •  
  • 4. Ko TH, Ting HY, Lin CH, J. Appl. Polym. Sci., 35, 863 (1988)
  •  
  • 5. Lee JY, Cho DH, Kim DG, Park IS, Ha HS, Yoon BI, Polym.(Korea), 17(1), 59 (1993)
  •  
  • 6. Gupta AK, Paliwal DK, Bajaj P, Macromol. Chem. Phys., C31(1), 1 (1991)
  •  
  • 7. Markovic V, Marinkovic S, Carbon, 18, 329 (1980)
  •  
  • 8. Ko TH, Hone KW, Polym. Compos., 14, 247 (1993)
  •  
  • 9. Cho D, Ahn YS, Lee JY, Polym.(Korea), 20(6), 1024 (1996)
  •  
  • 10. Cho D, cho Y, Park JK, Lee JY, Polym. Sci. Technol., 11(6), 717 (2000)
  •  
  • 11. Zhao LR, Jang BZ, J. Mater. Sci., 30(18), 4535 (1995)
  •  
  • 12. Ko TH, Hone KW, SAMPLE J., 28, 17 (1992)
  •  
  • 13. Zhao LR, Jang BZ, J. Mater. Sci., 32(11), 2811 (1997)
  •  
  • 14. Pan G, Muto N, Miyayama M, Yanagida H, J. Mater. Sci., 27, 3497 (1992)
  •  
  • 15. Schmidt DL, Craig RDAir Force Wright Aeronautical Laboratories Technical Report, AFWAL-TR-81-4136, 1 (1982)
  •  
  • 16. ASTM D3379-75
  •  
  • 17. Chung DDLCarbon Fiber Composites, chapter 6, Butterworth-Heinemann, Boston (1994)
  •  
  • 18. Yoon BI, Cho D, Ha HS, Lee JY, Park IS, Kim DGResearch Report, MRDD-411-91622, Agency for Defense Development, Part IV, p 142 (1991)
  •  
  • 19. Peebles LHCarbon Fibers: Formation, Structure, and Properties, chapter 6, CRC Press, Boca Raton (1995)
  •  
  • 20. Thomas CREssentials of Carbon-Carbon Composites, chapter 1, The Royal Society of Chemistry, Cambridge (1993)
  •  
  • 21. Runnacles J, Tangen M, Walker TMaterial Technology Center 8th Annual Conference, SIU at Carbondale, p. 33 (1992)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2023 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2001; 25(4): 575-586

    Published online Jul 25, 2001

  • Received on Apr 4, 2001