Article
  • Studies on the Characteristics of Single-Layered Organic EL Device Using a Copolymer Having Hole and Electron Transporting Moieties
  • Lee CH, Kim SW, Oh SY
  • 정공 및 전자 전달체의 기능기를 가진 공중합체를 사용한 단층형 유기 발광소자의 특성에 관한 연구
  • 이창호, 김승욱, 오세용
Abstract
We have synthesized a novel carrier transporting copolymer having triphenylamine moiety as a hole transporting unit and triazine moiety as an electron transporting unit in the polymer side chain. Single-layered organic electroluminescent (EL) devices consisted of ITO/copolymer and emitting materials (DCM, coumarin 6, DPvBi)/Al exhibited maximum external quantum efficiency when the ratio of hole transporting unit and electron transporting unit is 6:4 and the content of emitting material is 30 wt%. Especially, the devices emitted the light of red (620 nm), green (520 nm) and blue (450 nm) corresponding to the emitting materials, respectively. A maximum luminance of ITO/copolymer (6:4) and DCM (30 wt%)/Al EL device was about 500 cd/m(2) at a DC drive voltage of 12 V.

곁사슬에 정공 및 전자 전달체로 triphenylamine moiety와 triazine moiety를 갖는 새로운 공중합체를 합성하였다. ITO/공중합체와 발광물질 (DCM, coumarin 6, DPvBi)/Al으로 구성되는 단층형 유기 EL 소자는 정공 전달 단위체와 전자 전달 단위체 비율이 6:4와 발광물질의 함유량이 30 wt%일 때 최고의 외부 양자 효율을 나타내었다. 특히 위에서 제작한 유기 EL 소자는 각각 발광물질에 상응하는 빨강 (620 nm), 초록 (520 nm)과 파랑색 (450 nm)의 빛을 발광하였다. 최고 휘도는 DC 12 V에서 ITO/공중합체 (6:4)와 DCM (30 wt%)/Al으로 구성되는 소자를 구동하였을 때 500 cd/m(2)이었다.

Keywords: electroluminescence; carrier transporting copolymer; single layer; emitting material; luminance

References
  • 1. Braun D, Heeger AJ, Appl. Phys. Lett., 58, 1982 (1991)
  •  
  • 2. Oh SY, Lee CH, Jung ES, Choi JW, Jung PJ, Mol. Cryst. Liq. Cryst., 371(-), 459 (2001)
  •  
  • 3. Lee CH, Kim E, Oh SY, Mol. Cryst. Liq. Cryst., 371(-), 265 (2001)
  •  
  • 4. Lee CH, Kim SW, Oh SY, Mol. Cryst. Liq. Cryst., 370(-), 53 (2001)
  •  
  • 5. Kido J, Matsumoto T, Appl. Phys. Lett., 73, 2866 (1998)
  •  
  • 6. Palilis LC, Lidzey DG, Redeker M, Bradley DDC, Inbasekaran M, Woo EP, Wu WW, Synth. Met., 159, 111 (2000)
  •  
  • 7. Aminaka E, Tsutsui T, Saito S, Synth. Met., 71, 2009 (1995)
  •  
  • 8. Adachi C, Tsutsui T, Saito S, Appl. Phys. Lett., 56, 799 (1989)
  •  
  • 9. Kido J, Nagai K, Ohashi Y, Chem. Lett. Jpn., 657 (1990)
  •  
  • 10. Oh SY, Lee CH, Kim HM, Lee SB, Mol. Cryst. Liq. Cryst., 349(-), 479 (2000)
  •  
  • 11. Scott JC, Kaufman JH, Block PJ, Dpiertro R, Salein J, Gaitia JA, J. Appl. Phys., 79, 2745 (1996)
  •  
  • 12. Calcialli F, Friend RH, Moratti SC, Holmes AB, Synth. Met., 67, 157 (1994)
  •  
  • 13. Araki T, Misawa H, Rev. Sci. Instru., 66, 5469 (1995)
  •  
  • 14. Sheats JR, Antoniadis H, Hueschen M, Leonard W, Miller J, Moon R, Roitman D, Stocking A, Science, 273(5277), 884 (1996)
  •  
  • 15. Tachelet W, Jacobs S, Ndayikengurukiye H, Geise HJ, Gruner J, Appl. Phys. Lett., 64, 2364 (1994)
  •  
  • 16. Hu B, Yang Z, Karasz FE, Appl. Phys., 76, 2419 (1994)
  •  
  • 17. Oh SY, Lee CH, Kim HM, Choi JW, Rhee HW, Synth. Met., 117, 195 (2001)
  •  
  • 18. Fink R, Frenz C, Thelakkat M, Schmidt HW, Macromolecules, 30(26), 8177 (1997)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2002; 26(4): 543-550

    Published online Jul 25, 2002

  • Received on Apr 22, 2002
  • Accepted on May 28, 2002