Article
  • Process Development of Gas Injection Molding Using Computer Aided Engineering
  • Jang W, Cho C, Shim SE, Kim GJ, Chung ST, Choe S
  • 컴퓨터지원 공학(CAE)을 이용한 기체 사출 성형의 공정 개선
  • 장우진, 조정환, 심상은, 김건중, 정성택, 최순자
Abstract
Using computer simulation, the processibility and properties of the instrument panel of automobile produced by gas injection molding were predicted and evaluated. The P-V-T data of ABS, resin were used in the gas injection molding process in order to estimate the mold filling phenomena. The optimum process conditions were found by adjusting the process parameters including pressure, filling time, the positionsof gas channel and runner. The process was simplified and the final instrument panel produced by the gas injection molding was found to have improved dimension stability compared to the one produced by conventional injection molding.

자동차 계기판을 제조하는 기체 사출 성형의 공정에 있어서 전산 모사를 통한 공정성 및 제조된 제품의 물성 향상에 관한 연구를 수행하였다. ABS 삼원공중합체의 P-V-T 자료를 이용하여 기체 사출 공정을 적용하였으며 시간에 따른 금형 충전 효과를 예측하였다. 또한 기체 사출 성형에 있어서 압력, 충전 시간, 기체의 주입 통로 및 런너의 위치 등 다양한 가공 인자들을 변화시킴으로서 공정의 최적 조건을 찾을 수 있었다. 이러한 전산 모사를 통하여 확립된 공정을 통해 제조된 계기판은 일반적인 사출 성형법에 의해 제조되어진 제품에 비해서 우수한 치수 및 변형 안정성이 개선되었다.

Keywords: Gas injection; instrument panel; Mold Flow CAE; ABS Terpolymer

References
  • 1. Galli EGas-assist Injection Molding: More Systems, More Molders, More OEMs, PM&E, pp. 27-30, June (1993)
  •  
  • 2. Turng LS, SPE Tech. Paper ANTEC, 50, 452 (1992)
  •  
  • 3. Rusch KCGas-Assissted Injection Molding-A New Technology is Commercialized, Plastics Engineering, Jul. (1989)
  •  
  • 4. Hiber CA, Shen SF, J. Non-Newton. Fluid Mech., 7, 1 (1980)
  •  
  • 5. Wang VW, Hieber CA, Wang KK, SPE Tech. Paper. ANTEC, 32, 97 (1986)
  •  
  • 6. Maviridis H, Hrymak AN, Vlachopoulos J, Polym. Eng. Sci., 26, 449 (1986)
  •  
  • 7. Turing LS, Wang VW, SPE Tech. Paper. ANTEC, 49, 297 (1991)
  •  
  • 8. Turng LSInnov. Polym. Process.: Molding, 43 (1996)
  •  
  • 9. Tateyama HDesign Innovation for TV Cabinets by Gas Assisted Injection Moulding, Proceedings of the Society of the Plastic Industry's(SPI) Structural Plastics Division's(SPD) 20th Annual Conference and New Product Design Competition, Washington, D.C., Apr. 5-8 (1992)
  •  
  • 10. Shah S, Hlavary DGas Injection Molding of an Automotive Structural Part, Plast. Eng., Oct. (1991)
  •  
  • 11. Avery JAGas Assist Injection Molding: Technological and Commercial Status,, Mar. (1993)
  •  
  • 12. Mapleston PGas-assist Injection Molding: More Variants from more Sources, Modern Plastics International, Feb. (1989)
  •  
  • 13. Gaspari JDGas Injection Demonstrates Automotive Large-Part Potential, Plast. Technol., Sep. (1994)
  •  
  • 14. Shah S, Hlavaty D, SPE Tech. Paper. ANTEC, 49, 1479 (1991)
  •  
  • 15. Kim B, Jang W, Kim J, Chung CW, Park YH, Choe S, Polym.(Korea), 25(6), 855 (2001)
  •  
  • 16. Kim B, Jang W, Kim J, Cho J, Park YH, Choe S, HWAHAK KONGHAK, 41(5), 577 (2003)
  •  
  • 17. Austin C, Kennedy PMoldflow Data Theory, Moldflow Pty. Ltd., USA (1992)
  •  
  • 18. Ryan ME, Chung TS, Polym. Eng. Sci., 20, 642 (1980)
  •  
  • 19. Austin C, Kennedy PFlow Analysis Reference Manual, Moldflow Pty., USA (1993)
  •  
  • 20. Chen BS, Liu WH, Polym. Eng. Sci., 29, 1039 (1988)
  •  
  • 21. Gas Injection Molding Training Manual, Moldflow Korea (1997)
  •  
  • 22. Hong MWInjection Molding Technology I, Kijun Press, Seoul, Korea (1989)
  •  
  • 23. Kim JW, Kim CS, Kim HDMold Design, Wonchang Press, Incheon, Korea (2002)
  •  
  • 24. Nielsen LE, Landel RFMechanical Properties of Polymers and Composites, 2nd Ed., Dekker, N.Y. USA, pp. 15-23 (1994)
  •  
  • 25. Clark CL, Williams RRationalizing Gas-Assist Injection Molding Processing Conditions, SAE, N.Y. USA, pp. 85-89 (1995)
  •  
  • 26. Min BH, J. Inject. Molding Technol., 1, 204 (1997)
  •  
  • 27. Witold B, Roger DComeliussen Failure of Plastics, Hanser Publishers, New York (1986)
  •  
  • 28. Woll SL, Cooper DJ, Souder BV, Polym. Eng. Sci., 36(11), 1477 (1996)
  •  
  • 29. Austin CMoldflow Design Principles, Wiley, N.Y., USA (1986)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2004; 28(3): 263-272

    Published online May 25, 2004

  • Received on Jan 2, 2004
  • Accepted on May 21, 2004