Invited Article
  • Morphology Formation and Application of Interpenetrating Polymer Network (IPN) Materials
  • Kim SC
  • Interpenetrating Polymer Network(IPN)의 모폴로지 형성과 그 응용
  • 김성철
Abstract
Interpenetrating polymer network (PN) is a mixture of network polymers. The characteristics of IPN material is the control of morphology during the IPN synthesis. By controlling the relative kinetics of chemical reaction (as well as gellation) and phase separation, the morphology of IPN can be controlled to obtain materials with nano-scale domain and also the co-continuous phase. Other important advantage is the fact that the morphology is permanent due to the presence of the physical interlocking between the networks. The combination of hydrophilic polyurethane and hydrophobic polystyrene in IPN form provides enhanced blood compatibility due to the co-existence of the hydrophilic and hydrophobic domains in nano-scale on the surface. The reaction temperature, reaction pressure and the degree of crosslinking were varied during the IPN synthesis and the morphology and blood compatibility of the resulting IPN materials were studied.

상호 침투하는 고분자 가교구조(IPN)는 가교 고분자의 블렌드라고 볼 수 있다. IPN의 큰 특징 중의 하나는 IPN 합성 중 모폴로지의 조절이 가능하다는 점으로 반응속도와 상 분리 속도의 상대적인 크기에 따라 모폴로지의 조절이 가능하고 따라서 나노미터 크기의 분산상도 얻을 수 있고 상호연속 상(co-continuous phase)도 얻을 수 있다. 또 하나의 중요한 특징은 IPN 구조에 존재하는 가교구조 사이의 물리적 얽힘때문에 한번 형성된 모폴로지는 주위 환경에 관계없이 변하지 않는다는 점이다. 친수성 폴리우레탄과 소수성 폴리스티렌의 결합을 IPN 형태로 하면 표면에 친수성과 소수성 도메인이 공존하게 되고 이러한 표면이 우수한 혈액 적합성을 보인다. IPN 합성시 반응온도, 반응압력, 가교밀도 등을 변화시켜 소수성 폴리스티렌 도메인의 크기를 변화시키고 이에 따른 혈액 적합성의 변화를 연구하였다.

Keywords: IPN; phase separation; morphology formation; blood compatibility

References
  • 1. Kim SCInterpenetrating Polymer Networks Materials, Polymer Engineering II, Hee Joong Dang, 453 (1997)
  •  
  • 2. Sperling LHInterpenetrating Polymer networks and Related Materials, Plenum Press, New York (1981)
  •  
  • 3. Wasserman E, J. Am. Chem. Soc., 82, 4433 (1960)
  •  
  • 4. Millar JR, J. Chem. Soc., 1311 (1960)
  •  
  • 5. Sperling LH, Friedman DW, J. Polym. Sci. A-2, 7, 425 (1969)
  •  
  • 6. Frisch HL, Klempner D, Frisch KC, Polym. Lett., 7, 775 (1969)
  •  
  • 7. Sperling LH, Arnts RR, J. Appl. Polym. Sci., 15, 2317 (1971)
  •  
  • 8. Davison S, Gergen WPU.S.Pat. 4,015,103 (1977)
  •  
  • 9. Lee DS, Kim SC, Macromolecules, 17, 2193 (1984)
  •  
  • 10. Lee JH, Kim SC, Macromolecules, 19, 644 (1986)
  •  
  • 11. Kim JH, Kim SC, Polym. Eng. Sci. J., 27, 1252 (1987)
  •  
  • 12. Lee YK, Kim SC, Polym. Bull., 20, 261 (1988)
  •  
  • 13. Kim KI, Kim SC, Polym. Bull., 29, 293 (1992)
  •  
  • 14. Shin YC, Han DK, Kim YH, Kim SC, J. Biomater. Sci.-Polym. Ed., 6, 195 (1994)
  •  
  • 15. Kim YS, Kim SC, Macromolecules, 32(7), 2334 (1999)
  •  
  • 16. Kim JH, Kim SC, J. Biomater. Sci.-Polym. Ed., 14, 601 (2003)
  •  
  • 17. Song MJBlood Compatibility of Hydrophilic PU and Hydrophobic PS IPNs, Master Thesis, unpublished (1996)
  •  
  • 18. Kim JH, Kim SC, Biomaterials, 23(9), 2015 (2002)
  •  
  • 19. Kim JH, Kim SC, J. Biomater. Sci.-Polym. Ed., 11, 197 (2000)
  •  
  • 20. Kim JH, Kim SC, Macromolecules, 36(8), 2867 (2003)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2005; 29(1): 1-7

    Published online Jan 25, 2005