Article
  • Surface Modification of Polyurethane Film Using Atmospheric Pressure Plasma
  • Yang IY, Myung SW, Choi HS, Kim IH
  • 대기압 플라스마에 의한 폴리우레탄 필름의 표면 개질
  • 양인영, 명성운, 최호석, 김인호
Abstract
Commercial polyurethane film (PU) was modified with Ar plasma ionized in dielectric barrier discharge (DBD) plate-type reactor under atmospheric pressure. We measured the change of the contact angle and the surface free energy with respect to the plasma treatment conditions such as treatment time, RF-power, and Ar gas flow rate. We also optimized the plasma treatment conditions to maximize the surface peroxide concentration. At the plasma treatment time of 70 sec, the power of 120 W and the Ar gas flow rate of 5 liter per minute (LPM), the best wettability and the highest surface free energy were obtained. The 1,1-diphenyl-2-picrylhydrazyl (DPPH) method confirmed that the surface peroxide concentration was about 2.1 nmol/cm2 at 80 W, 30 sec, 6 LPM.

상업용 폴리우레탄(PU) 필름의 표면 개질 목적으로 대기압에서 플라스마를 발생시키기 위한 dielectric barrier discharge(DBD) 구조의 평판형 플라스마 반응기 내에서 이온화된 아르곤 플라스마를 사용하였다. 플라스마 처리 공정변수인 처리 시간, 처리 RF-power, 아르곤 가스 유속을 변화시켜가며 접촉각을 측정하여 젖음성과 표면 자유 에너지 변화를 알아보았고, 필름 표면 위에 과산화물을 제대로 도입시키기 위해 플라스마 처리 공정변수를 최적화하였다. 대기압 플라스마 처리 시간 70초, RF-power 120 W, 아르곤 가스유속 6 liter per minute(LPM)에서 가장 높은 젖음성과 표면 자유 에너지 값을 보였고, 1,1-diphenyl-2-picrylhydrazyl(DPPH) 법을 사용하여 PU 필름의 표면에 생성된 과산화물의 농도를 정량한 결과, 처리 시간 30초, RF-power 80 W, 아르곤 가스유속 6 LPM의 플라스마 처리 조건에서 최대 2.1 nmol/cm2의 과산화물이 생성되었다.

Keywords: atmospheric pressure plasma; polyurethane film; surface free energy; DPPH method; peroxide

References
  • 1. Kang ET, Neoh KG, Li ZF, Tan KL, Liaw DJ, Polymer, 39(12), 2429 (1998)
  •  
  • 2. Hegemann D, Brunner H, Oehr C, Nucl. Instrum. Methods Phys. Res. Sect. B-Beam Interact. Mater. Atoms, 208, 281 (2003)
  •  
  • 3. Yang S, Gupta MC, Surf. Coat. Technol., 187, 172 (2004)
  •  
  • 4. Dabhade RV, Bodas DS, Gangal SA, Sens. Actuators B-Chem., 98, 37 (2004)
  •  
  • 5. Kim YS, Kwon OJ, Kim EH, Myung SW, Choi HS, HWAHAK KONGHAK, 41(2), 224 (2003)
  •  
  • 6. Park KD, Kim YH, Han DG, Ji KS, Rubber Technology, 3, 111 (2002)
  •  
  • 7. Ryan ME, Badyal JP, Macromolecules, 28(5), 1377 (1995)
  •  
  • 8. Jang JH, Eom SI, Kim YH, J. Korean Fiber Society, 39, 100 (2002)
  •  
  • 9. Huang CY, Chen CL, Surf. Coat. Technol., 153, 194 (2002)
  •  
  • 10. Yeom YH, Myung SW, Choi HS, Korean Chem. Eng. Res., 42(1), 89 (2004)
  •  
  • 11. Yamanoto T, Okubo M, Imai N, Mori Y, Plasma Chem. Plasma Process., 24, 1 (2004)
  •  
  • 12. Liu C, Brown NMD, Meenan BJ, Surf. Sci., 575, 273 (2005)
  •  
  • 13. Seebock R, Esrom H, Charbonnier M, Romand M, Plasmas Polym., 5, 103 (2000)
  •  
  • 14. Noeske M, Degenhardt J, Strudthoff S, Lommatzsch U, Int. J. Adhes. Adhes., 24, 171 (2004)
  •  
  • 15. Toshifuji J, Katsumata T, Takikawa H, Sakakibara T, Shimizu I, Surf. Coat. Technol., 171, 302 (2003)
  •  
  • 16. Chung YM, Jung MJ, Han JG, Lee MW, Kim YM, Thin Solid Films, 447-448, 354 (2004)
  •  
  • 17. Beake BD, Ling JSG, Leggett G, J. Mater. Chem., 8, 1735 (1998)
  •  
  • 18. Kang ET, Tan KL, Kato K, Uyama Y, Ikada Y, Macromolecules, 29(21), 6872 (1996)
  •  
  • 19. Joo HS, Lim DH, Park YJ, Kim HJ, J. Adh. Inter., 6, 19 (2005)
  •  
  • 20. Zhang Y, Myung SW, Choi HS, Kim IH, Choi JH, J. Ind. Eng. Chem., 8(3), 236 (2002)
  •  
  • 21. Byun KH, Kang IK, Lim HS, Lee JH, Lee HB, Polym.(Korea), 17(2), 186 (1993)
  •  
  • 22. Suzuki M, Kishida A, Iwata H, Ikada Y, Macromolecules, 19, 1804 (1986)
  •  
  • 23. Lu WL, Huang CY, Roan ML, Surf. Coat. Technol., 172, 251 (2003)
  •  
  • 24. Oiseth SK, Korzer A, Kasemo B, Lausmaa J, Appl. Surf. Sci., 202, 92 (2002)
  •  
  • 25. Hwang SN, Jeon BJ, Jung IH, J. Korean Ind. Eng. Chem., 9(3), 383 (1998)
  •  
  • 26. Ozdemir Y, Hasirci N, J. Mater. Sci. -Mater. Med., 13, 1147 (2002)
  •  
  • 27. Nguyen LT, Sung NH, Suh NP, J. Polym. Sci. : Polym. Lett. Ed., 18, 541 (1980)
  •  
  • 28. Kim MJ, Seo ED, Polym.(Korea), 26(2), 279 (2002)
  •  
  • 29. Seo Y, Polym. Sci. Technol., 13(6), 759 (2002)
  •  
  • 30. Kang IK, Kwon OH, Byun KH, J. Mater. Sci. -Mater. Med., 7, 135 (1996)
  •  
  • 31. Ji LY, Kang ET, Neoh KG, Tan KL, React. Funct. Polym., 46(2), 145 (2000)
  •  
  • 32. Zhang J, Cui CQ, Lim TB, Chem. Mater., 11, 1061 (1999)
  •  
  • 33. Yasuda HPlasma Polymerization, Academic Press, Orlando, p 295 (1985)
  •  
  • 34. Konig U, Nitschke M, Menning A, Eberth G, Pilz M, Arnhold C, Simon F, Adam G, Werner C, Colloids Surf. B: Biointerfaces, 24, 63 (2002)
  •  
  • 35. Dogue ILJ, Mermiliod N, foerch R, Nucl. Instrum. Methods Phys. Res. Sect. B-Beam Interact. Mater. Atoms, 105, 164 (1998)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2023 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2005; 29(6): 581-587

    Published online Nov 25, 2005

  • Received on Aug 30, 2005
  • Accepted on Sep 27, 2005