Article
  • Toughening Mechanism and Mechanical Property in Thermoplastic Polyolefin-Based Composite Systems
  • Weon JI
  • 폴리올레핀 복합재료의 파괴인성 메커니즘 및 기계적 특성
  • 원종일
Abstract
Toughening mechanisms and mechanical properties of three different polyolefin-based composite systems are studied using the tensile , Izod impact and double-notch four-point-bending (DN-4PB) test, which is well known be an effective tool for probing the failure mechanism(s) around the sub-critically propagated crack tip. Microscopy observations such as optical microscopy and transmission electron microscopy were carried out for the test samples. A detailed investigation clearly shows that a variety of toughening mechanisms, i.e., shear yielding, craze, particle-matrix debonding, rubber particle cavitation, crack deflection and bifurcation, are observed around crack tip damage zone. These toughening mechanisms are responsible for the observed, improved fracture toughness. Based on this study, DN-4PB technique is sufficient to obtain the information needed to describe the fracture behavior of polyolefin-based composites as well as their corresponding toughening mechanisms.

세 종류의 폴리올레핀 복합재료의 기계적인 특성과 파괴인성 메커니즘이 연구되었다. 기계적 특성을 조사하기 위해 인장 시험 및 아이조드 충격 시험이 수행되었다. 균열 선단 주위의 파손 메커니즘을 정확히 조사하기 위해 2노치-4점 굽힘 기법이 도입/적용되었다. 광학현미경과 투과형 전자현미경을 이용하여, 폴리올레핀 복합재료의 균열 선단 주변 국부적인 파괴인성 특성들이 관찰되었다. 이를 통한 구체적인 관찰은, 폴리올레핀 복합재료의 균열 선단 주변에 전단밴딩, 크레이즈, 입자-수지간 분리, 고무입자의 캐비테이션, 크랙 휨 및 크랙 분기 등과 같은 다양한 파괴인성 메커니즘들이 존재함을 보여주었다. 이러한 파괴인성 메커니즘들은 아이조드 충격 시험에서 보여진 파괴인성 값의 증가에 대한 실질적인 원인으로 보여진다. 본 연구를 바탕으로, 2노치-4점 굽힘 기법은 폴리올레핀 복합재료의 파괴 거동과 그와 관련된 파괴인성 메커니즘을 기술할 수 있는 충분한 정보를 제공하였다.

Keywords: polyolefin; toughening mechanism; fracture toughness; shear banding; craze

References
  • 1. Zuiderduin WCJ, Westzaan C, Huetink J, Gaymans RJ, Polymer, 44(1), 261 (2003)
  •  
  • 2. Sue HJ, Yee AF, J. Mater. Sci., 28, 2915 (1993)
  •  
  • 3. Sue HJ, Polym. Eng. Sci., 31, 270 (1991)
  •  
  • 4. Sue HJ, Yee AF, J. Mater. Sci., 24, 1447 (1989)
  •  
  • 5. Lu J, Wei GX, Sue HJ, Chu J, J. Appl. Polym. Sci., 76(3), 311 (2000)
  •  
  • 6. Lu J, Li CKY, Wei GX, Sue HJ, J. Mater. Sci., 35, 271 (2000)
  •  
  • 7. Wei GX, Sue HJ, J. Appl. Polym. Sci., 74(10), 2539 (1999)
  •  
  • 8. Tabtiang A, Venables R, Eur. Polym. J., 36, 137 (2000)
  •  
  • 9. Wah CA, Choong L, Neon GS, Eur. Polym. J., 36, 789 (2000)
  •  
  • 10. Premphet K, Horanont P, Polymer, 41(26), 9283 (2000)
  •  
  • 11. Bartczak Z, Argon AS, Cohen RE, Weinberg M, Polymer, 40(9), 2347 (1999)
  •  
  • 12. Liang JZ, Li RKY, J. Appl. Polym. Sci., 77(2), 409 (2000)
  •  
  • 13. Mitsuishi K, Kodama S, Kawasaki H, Polym. Eng. Sci., 25, 1069 (1985)
  •  
  • 14. Wei GX, Sue HJ, Chu J, Huang CY, Gong KC, J. Mater. Sci., 35(3), 555 (2000)
  •  
  • 15. Jancar J, DiBenedetto AT, Polym. Eng. Sci., 33, 559 (1993)
  •  
  • 16. Demjen Z, Pukanszky B, Jozsef N, Composites Part A, 29, 323 (1998)
  •  
  • 17. Rothon RParticulate-filled polymer composites, Wiley, New York, NY (1995)
  •  
  • 18. Wei GX, Sue HJ, Chu J, Huang C, Gong K, J. Mater. Sci., 35, 555 (2000)
  •  
  • 19. Sue HJ, J. Mater. Sci., 27, 3098 (1992)
  •  
  • 20. Wei GX, Sue HJ, Polym. Eng. Sci., 40(9), 1979 (2000)
  •  
  • 21. Li YM, Wei GX, Sue HJ, J. Mater. Sci., 37(12), 2447 (2002)
  •  
  • 22. Wei GX, Sue HJ, Chu J, Huang C, Gong K, Polymer, 41(8), 2947 (2000)
  •  
  • 23. Chan CM, Wu JS, Li JX, Cheung YK, Polymer, 43(10), 2981 (2002)
  •  
  • 24. Sumita M, Shizuma T, Miyasaka K, Ishikawa K, J. Macromol. Sci.-Phys., 822, 601 (1983)
  •  
  • 25. Sumita M, Tsukurmo T, Miyasaka K, Ishikawa K, J. Mater. Sci., 18, 1758 (1983)
  •  
  • 26. Usuki A, Kato M, Okada A, Kurauchi T, J. Appl. Polym. Sci., 63(1), 137 (1997)
  •  
  • 27. Kato M, Usuki A, Okada A, J. Appl. Polym. Sci., 66(9), 1781 (1997)
  •  
  • 28. Kurokawa Y, Yasuda H, Oya A, J. Mater. Sci. Lett., 15, 1481 (1996)
  •  
  • 29. Holik AS, Kambour RP, Hobbs SY, Fink DG, Microstructure Sci., 7, 357 (1979)
  •  
  • 30. Usuki A, Kojima Y, Kawasumi M, Okada A, Fukushima Y, Kurauchi T, Kamigaito O, J. Mater. Res., 8, 1179 (1993)
  •  
  • 31. Weon JI, Xia ZY, Sue HJ, J. Polym. Sci. B: Polym. Phys., 43(24), 3555 (2005)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2007; 31(2): 123-129

    Published online Mar 25, 2007

  • Received on Nov 8, 2006
  • Accepted on Feb 15, 2007