Note
  • Plasma Surface Modification of Polystyrene Foam for Recycling: 1. Hydrophilic Thin Film Deposition from Acrylamide
  • Seo ED
  • Polystyrene Foam의 재활용을 위한 플라즈마 표면개질: 1. 아크릴아미드에 의한 친수성 박막생성
  • 서은덕
Abstract
Polystyrene foam(styrofoam) was treated with low-temperature oxygen plasma by means of immobilization and grafting techniques in order to modify its hydrophobic surface property to hydrophilic one using hydrophilic monomers of acrylic acid and acrylamide, and its surface chemical structure, morphology, and hydrophilicity were examined by ESCA, field emission scanning electron microscope (FESEM), and contact-angle meter. The experimental evidences, such as the increases of O/C and N/C ratios in ESCA spectrum, thin film deposition, decrease in contact-angle, strongly suggested that the plasma treatments were useful methods for the preparation of hydrophilic surface. Contact angle diminished drastically from 84° to 18∼19°. Acrylamide, compared to acrylic acid, appeared to play a decisive role, and to be more powerful agent for improving its surface hydrophilicity.

폴리스틸렌발포체(스티로폼)를 비롯한 소수성 폴리머의 재활용과 친수성 표면개질의 한 방편으로 산소플라즈마 고정화와 그래프팅법을 이용하여 친수성인 아크릴산과 아크릴아미드단량체를 스티로폼 표면에 도입하였다. 플라즈마 처리에 의한 표면개질의 증거는 ESCA스펙트럼의 O/C와 N/C ratio의 증가, 전계방사현미경의 사진으로부터 박막생성 및 접촉각의 현저한 감소 현상의 관찰로부터 확인하였다. 접촉각은 84°에서 18∼19°로 대폭 감소하였으며, 이는 아크릴산보다 아크릴아미드가 결정적 요인이 됨을 알 수 있었다.

Keywords: plasma immobilization; grafting; surface hydrophilicity; styrofoam; acrylamide

References
  • 1. Shin BY, Kang KS, Jo GS, Han DH, Song JS, Lee SI, Lee TJ, Kim BS, Polym.(Korea), 31(3), 269 (2007)
  •  
  • 2. Ko YK, Jeong JS, Kim SH, Lim JY, Rhee JM, Kim MS, Lee HB, Khang G, Polym.(Korea), 32(2), 109 (2008)
  •  
  • 3. Sim DH, Seul SD, Polym.(Korea), 32(3), 276 (2008)
  •  
  • 4. Seo ED, Kang YR, Lim HS, J. Korean. Soc. Dyer & Finishers, 3, 22 (1991)
  •  
  • 5. Seo ED, Kang YR, Kim JD, J. Korean. Soc. Dyer & Finishers, 7, 55 (1995)
  •  
  • 6. Seo ED, J. Korean. Soc. Dyer & Finishers, 19, 42 (2007)
  •  
  • 7. Wang HZ, Rembold MW, Wang JQ, J. Appl. Polym. Sci., 49, 701 (1993)
  •  
  • 8. Shao J, Carr CM, Rowlands CP, Walton J, J. Text. Inst., 90, 459 (1999)
  •  
  • 9. Bae JS, Kim IH, J. Korean. Soc. Dyer & Finishers, 13, 256 (2001)
  •  
  • 10. Jeon YS, Nam SW, Kim IH, J. Korean. Soc. Dyer & Finishers, 16, 10 (2004)
  •  
  • 11. Lee HS, Jeong YK, Jang J, J. Korean. Soc. Dyer & Finishers, 18, 281 (2006)
  •  
  • 12. Yasuda HPlasma Polymerization, Academic Press, Orlando, Florida (1985)
  •  
  • 13. Clouet F, Shi MK, J. Appl. Polym. Sci., 46, 1955 (1992)
  •  
  • 14. France RM, Short RD, J. Chem. Soc.-Faraday Trans., 93, 3173 (1997)
  •  
  • 15. Seo ED, Yasuda H, Polym.(Korea), 14(4), 378 (1990)
  •  
  • 16. Seo ED, Lym HS, Kang YR, Polym.(Korea), 15(5), 570 (1991)
  •  
  • 17. Seo ED, Macromol. Res., 11(5), 387 (2003)
  •  
  • 18. Klopffer WIntroduction to Polymer Spectroscopy, Springer-Verlag, Berlin Heidelberg New York Tokyo, p.13 (1984)
  •  
  • 19. Choi DM, Park CK, Cho K, Park CE, Polymer, 38(25), 6243 (1997)
  •  
  • 20. Schrader ME, Loeb GIModern Approaches to Wettability, Plenum, New York, p.144 (1992)
  •  
  • 21. Kim MJ, Seo ED, Polym.(Korea), 26, 279 (2002)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2008; 32(5): 497-500

    Published online Sep 25, 2008

  • Received on May 16, 2008
  • Accepted on Jul 14, 2008