Article
  • Effect of Graft Copolymer Composition on the Compatibility of Biodegradable PCL/PCL-g-PEG Blend
  • Cho KY, Lee KS, Park JK
  • PCL/PCL-g-PEG 생분해성 블렌드에서 그래프트 공중합체의 조성에 따른 상용성의 영향
  • 조국영, 이기석, 박정기
Abstract
Blend films based on the poly(ε-caprolactone) (PCL) and amphiphilic biodegradable polymer, poly(ethylene glycol) grafted poly(ε-caprolactone) (PCL-g-PEG), were prepared with different blend ratios in order to develop new biomedical material. PCL was the main component in the blend. The miscibility and characteristics of the blends were investigated. The crystallization temperature of the blend shifted to high temperatures with an increase of the graft copolymer contents when the homopolymer PCL was the main component of the blend. The PEG side chain in the blend affected the crystallization rate of the PCL crystals in the blend and alternating extinction bands were observed by optical microscopy. The protein adhesion behavior of the film was influenced by the water uptake of the film.

의료용으로 적용될 수 있는 새로운 재료를 제조하기 위하여 폴리카프로락톤(PCL)과 양친성 구조를 갖는 폴리(에틸렌 글리콜)(PEG)이 그래프트된 PCL을 이용하여 생분해성 블렌드를 제조하였다. 제조된 블렌드는 PCL을 기본으로 하고 여기에 그래프트 공중합체의 함량을 변화시키며 열적 그리고 결정화 특성을 관찰하였다. 그래프트 공중합체의 함량 변화에 따라 결정화 온도의 변화 및 결정화 속도가 변화하였고 이를 통해 그래프트 공중합체가 PCL의 결정화 거동에 영향을 미침을 확인하였다. 이는 광학현미경을 통한 결정의 교대 소광 밴드의 관찰을 통하여서도 확인할 수 있었다. 약물방출시스템과 같은 의료용 응용을 고려하여 블렌드 필름의 흡수거동과 단백질 흡착에 대한 특성도 평가하였다.

Keywords: blend; poly(ε-caprolactone); poly(ethylene glycol); crystallization; protein adhesion.

References
  • 1. Sun H, Mei L, Song C, Cui X, Wang P, Biomaterials, 27, 1735 (2006)
  •  
  • 2. Pitt CG, Chasalow FI, Hibionada YM, Klimas DM, Schindler A, J. Appl. Polym. Sci., 26, 3779 (1981)
  •  
  • 3. Chen DR, Bei JZ, Wang SG, Polym. Degrad. Stabil., 67, 455 (2000)
  •  
  • 4. Goodwin CJ, Braden M, Downes S, Marshall NJ, J. Biomed. Mater. Res., 40, 204 (1998)
  •  
  • 5. Hyun H, Lee JH, Seo KS, Kim MS, Rhee JM, Lee HB, Khang G, Polym.(Korea), 29(5), 468 (2005)
  •  
  • 6. Park SJ, Kim KS, Min BG, Hong SK, Polym.(Korea), 28(2), 103 (2004)
  •  
  • 7. Shogren R, J. Polym. Environ., 5, 91 (1997)
  •  
  • 8. Song CX, Sun HF, Feng XD, Polym. J., 19, 485 (1987)
  •  
  • 9. Choi EJ, Kim CH, Park JK, Macromolecules, 32(22), 7402 (1999)
  •  
  • 10. Kim CH, Cho KY, Park JK, Polymer, 42(12), 5135 (2001)
  •  
  • 11. Harris JM, Poly(ethylene glycol) Chemistry: Biotechnical and Biomedical Applications, Plenum Press, New York (1992)
  •  
  • 12. Min Y, Lee S, Park JK, Cho KY, Sung SJ, Macromol. Res., 16(3), 231 (2008)
  •  
  • 13. You JH, Choi SW, Kim JH, Kwak YT, Macromol. Res., 16(7), 609 (2008)
  •  
  • 14. Cho KY, Park JK, Polym. Bull., 57(6), 849 (2006)
  •  
  • 15. Rieger J, Dubois P, Jerome R, Jerome C, Langmuir, 22(18), 7471 (2006)
  •  
  • 16. Bogdanov B, Vidts A, Schacht E, Berghmans H, Macromolecules, 32(3), 726 (1999)
  •  
  • 17. Shiomi T, Imai K, Takenaka K, Takeshita H, Hayashi H, Tezuka Y, Polymer, 42(7), 3233 (2001)
  •  
  • 18. Ronneberger B, Kao WJ, Anderson JM, Kissel T, J. Biomed. Mater. Res., 30, 31 (1996)
  •  
  • 19. Johnston TP, Miller SC, J. Parenter. Sci. Technol., 43, 279 (1989)
  •  
  • 20. Lee JH, Kopecek J, Andrade JD, J. Biomed. Mater. Res., 23, 351 (1989)
  •  
  • 21. Lee JH, Ju YM, Lee WK, Park KD, Kim YH, J. Biomed. Mater. Res., 40, 314 (1998)
  •  
  • 22. Nijenhuis AJ, Colstee E, Grijpma DW, Pennings AJ, Polymer, 37(26), 5849 (1996)
  •  
  • 23. Crescenzi V, Manzini G, Calzolari G, Borri C, Eur. Polym. J., 8, 449 (1972)
  •  
  • 24. Chatani Y, Okita Y, Tadokoro H, Yamashita Y, Polym. J., 1, 555 (1970)
  •  
  • 25. Nojima S, Watanabe K, Zheng Z, Ashida T, Polym. J., 20, 823 (1988)
  •  
  • 26. Copper SL, Peppas NA, Biomaterials: Interfacial Phenomena and Applications. ACS Press, Washington DC (1982)
  •  
  • 27. Ruckenstein E, Chen JH, J. Adhes. Sci. Technol., 6, 611 (1992)
  •  
  • 28. Butler SM, Tracy MA, Tilton RD, J. Control. Release, 58, 335 (1999)
  •  
  • 29. Jeong JH, Lim DW, Han DK, Park TG, Colloid. Surface B, 18, 371 (2000)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2023 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2009; 33(3): 248-253

    Published online May 25, 2009

  • Received on Jan 6, 2009
  • Accepted on Feb 26, 2009